The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-29-2012, 09:52 PM   #26
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: LS factory cruise control hook up

I grabbed two 4 wire switches from the junk yard.. but I couldn't find a good lever assembly....
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 03-30-2012, 08:57 AM   #27
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by mcmlxix View Post
I grabbed two 4 wire switches from the junk yard.. but I couldn't find a good lever assembly....
What kind of column do you have?
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 03-30-2012, 10:45 AM   #28
kwin
Registered User
 
kwin's Avatar
 
Join Date: May 2011
Location: Grande Prairie, Alberta
Posts: 368
Re: LS factory cruise control hook up

Thanks you have answered many questions!
kwin is offline   Reply With Quote
Old 03-30-2012, 11:18 AM   #29
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,539
Re: LS factory cruise control hook up

Mine is hooked up and working! now for a long road trip!
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 03-30-2012, 01:40 PM   #30
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by Clyde65 View Post
Mine is hooked up and working! now for a long road trip!
Right on!
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 03-30-2012, 02:07 PM   #31
farmtrucks
Registered User
 
farmtrucks's Avatar
 
Join Date: Jun 2011
Location: Sneedville, TN
Posts: 831
Re: LS factory cruise control hook up

Quote:
Originally Posted by ls1nova71 View Post
Add them. You can get a wire with a terminal out of another PCM harness at a junk yard and add them to the TAC plug, then wire them up.
Do I need to wire just the TAC or the PCM also?
farmtrucks is offline   Reply With Quote
Old 03-30-2012, 06:19 PM   #32
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by farmtrucks View Post
Do I need to wire just the TAC or the PCM also?
Just the TAC, provided your PCM is already wired up, brake light switch input, that sort of thing.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 03-31-2012, 10:02 AM   #33
Critter
Future TOTM Winner
 
Critter's Avatar
 
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
Re: LS factory cruise control hook up

Aren't those levers pretty expensive. IIRC those are the ones LMC sells for $230. I have one that came out of a 1980 Suburban but it is pretty rough. Where did you get yours and where did you get the sheet of labels???


__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces)
72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts
2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver

Check it out www.lsdyno.com
Critter is offline   Reply With Quote
Old 03-31-2012, 01:55 PM   #34
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by Critter View Post
Aren't those levers pretty expensive. IIRC those are the ones LMC sells for $230. I have one that came out of a 1980 Suburban but it is pretty rough. Where did you get yours and where did you get the sheet of labels???


I don't know about LMC, I'll have to check my catalog when I get home. I think they are usually found in '81-82 trucks, but they're usually only a 3 wire switch so you have to change the switch inside of if with a 4 wire. Although I have seen a couple of them with the 4 wire switch already in them.

I had the labels made, if you want one, id sell you one for. $7 shipped.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 04-01-2012, 03:16 AM   #35
Critter
Future TOTM Winner
 
Critter's Avatar
 
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
Re: LS factory cruise control hook up

I will probably take you up on that, let me dig up my old lever and see how many wires it has and if it is usable. Thanks!
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces)
72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts
2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver

Check it out www.lsdyno.com
Critter is offline   Reply With Quote
Old 04-01-2012, 04:07 AM   #36
y5mgisi
Second Chance Program
 
y5mgisi's Avatar
 
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
Re: LS factory cruise control hook up

Subscribed!
y5mgisi is offline   Reply With Quote
Old 04-01-2012, 10:16 PM   #37
chebyshortbox65
Registered User
 
chebyshortbox65's Avatar
 
Join Date: Nov 2011
Location: yucca valley,ca
Posts: 206
Re: LS factory cruise control hook up

so in order to run cruise with an on off toggle and a momentary switch i need to run a jumper wire with 12v from the on off switch when its on to the middle of the momentary switch ?
chebyshortbox65 is offline   Reply With Quote
Old 04-02-2012, 03:18 AM   #38
code4
Registered User
 
Join Date: Feb 2005
Location: kalispell, Montana
Posts: 54
Re: LS factory cruise control hook up

Quote:
Originally Posted by chebyshortbox65 View Post
so in order to run cruise with an on off toggle and a momentary switch i need to run a jumper wire with 12v from the on off switch when its on to the middle of the momentary switch ?
I have a toggle switch that provides 12+ to terminal A to turn the unit on/off.
I have a momentary push button that provides 12+ to terminal B when pushed to set cruise. If i hold the button in it will coast until i release the button. Terminal C i remove, everything else is the same as posted.
code4 is offline   Reply With Quote
Old 04-03-2012, 10:21 AM   #39
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: LS factory cruise control hook up

Quote:
Originally Posted by ls1nova71 View Post
What kind of column do you have?
Posted via Mobile Device
I will probably end up with a Summit Racing aftermarket column.... for now I have the factory NON-tilt auto column shift.... So I need the one with the hole for the screw....

What did these come out of again.... 3 or 4 wire doesn't matter...
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 04-03-2012, 04:22 PM   #40
Critter
Future TOTM Winner
 
Critter's Avatar
 
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
Re: LS factory cruise control hook up

Quote:
Originally Posted by ls1nova71 View Post
I don't know about LMC, I'll have to check my catalog when I get home. I think they are usually found in '81-82 trucks, but they're usually only a 3 wire switch so you have to change the switch inside of if with a 4 wire. Although I have seen a couple of them with the 4 wire switch already in them.

I had the labels made, if you want one, id sell you one for. $7 shipped.
Posted via Mobile Device
I found my lever and it is a 3 wire not to mention its in pretty bad shape. I'm going to hold off on getting a sticker from you until I can find a 4 wire setup or at least a nicer 3 wire to convert. I might even get a new one, who know.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces)
72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts
2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver

Check it out www.lsdyno.com
Critter is offline   Reply With Quote
Old 04-03-2012, 05:42 PM   #41
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by mcmlxix View Post
So I need the one with the hole for the screw....

What did these come out of again.... 3 or 4 wire doesn't matter...
They are usually found in "81 vans and '81-82 trucks.
Quote:
Originally Posted by Critter View Post
I found my lever and it is a 3 wire not to mention its in pretty bad shape. I'm going to hold off on getting a sticker from you until I can find a 4 wire setup or at least a nicer 3 wire to convert. I might even get a new one, who know.
How bad is it? I might be able to fix it, I've fixed some pretty nasty looking ones. Or if you get a new one and the old one isn't all that bad, I might be interested in it.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 04-08-2012, 05:36 PM   #42
Gunny Davis
Registered User
 
Join Date: Aug 2011
Location: Arlington, TX.
Posts: 58
Re: LS factory cruise control hook up

Hey guys my cruise lever has 4 wires at the connecter Red, Brown, Green, Yelow. Pretty sure it is from Van tilt column.
I need help making the conections to my '99 Silverado cruise module.
I have transplanted the '99 5.3 / 4l60e, fuse block, and instrument cluster.

Appreciate your help
http://67-72chevytrucks.com/vboard/a...1&d=1333917353
Just need help with figuring out wich wires go were.

'99 Crusie Module Connecter:
A Gry 397 On switch Output
B DkBlu 84 Set/Coast switch signal
C Gry/Blk 87 Resume/Accel switch signal
D Brn/Wht 379 Clutch pedal switch output
E Blk/Wht 451 Engine control module ground
F Brn 41 Fused Ignition3 Output
G LtBlu 1320 Fused stop lamp feed
H Not used
(no "I" position)
J LtBlu/Blk 396 Signal engage
K DkGrn/Wht 817 VSS
Attached Images
 
__________________
My 72 Blazer Vortec Swap
http://67-72chevytrucks.com/vboard/s...d.php?t=479956
Gunny Davis is offline   Reply With Quote
Old 04-08-2012, 06:18 PM   #43
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

That's a switch from an aftermarket cruise control. They are usually normally closed switches and you will need to use relays to reverse them. Ackattack's thread that I have linked in my first post has instructions on how to do it. As for what wires to use for each function, you'll just have to test them to find out. You can do it with a DVM or a test light and a battery.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 05-10-2012, 01:54 PM   #44
farmtrucks
Registered User
 
farmtrucks's Avatar
 
Join Date: Jun 2011
Location: Sneedville, TN
Posts: 831
Re: LS factory cruise control hook up

I got mine wired up _ but it is not working. Mine is DBW, does it need to see speedo input to work.
farmtrucks is offline   Reply With Quote
Old 05-10-2012, 03:21 PM   #45
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

It has to have a VSS signal if that's what you're asking. You don't need an actual speedometer hooked up. Do you have both brake switch inputs hooked up? And do you have brake lights? It needs to see ground through them.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 05-14-2012, 01:42 PM   #46
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Pic for farmtrucks. This is a factory pigtail for the cruise switch. The gray wire is the on/off and goes to pin 14 on the TAC. Green is resume/accel and goes to pin 5. Blue is set/coast and goes to pin 4. Pink is the ignition power to the switch.
Attached Images
 
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 05-14-2012, 09:50 PM   #47
TR65
Senior Member
 
TR65's Avatar
 
Join Date: Nov 2007
Location: Greenville, SC
Posts: 873
Re: LS factory cruise control hook up

I have a 2005 LS2 with E40 computer DBW. Cruise does not work.

I think the problem is that the cruise is interlocked with the e-brake. The ECM has to see that the e-brake is off for the cruise to engage. (I know this is true on my 08 LS3). Problem is that the BCM reads the e-brake switch and puts the message on the low speed serial bus which the ECM reads.

(The same problem occurs for the case learn procedure. The TECH II has to see that the e-brake is on in this case for it to run the procedure.)

I am in the process of trying to get a BCM wired up with a toggle switch for the e-brake. No success yet.

Has anyone gotten cruise to work with DBW???

TR
__________________
1965 C10 SWB Fleet
Two owner

LS2 Swap Thread http://67-72chevytrucks.com/vboard/s...d.php?t=413880
TR65 is offline   Reply With Quote
Old 05-29-2012, 08:29 PM   #48
chevydog66
GM ONLY BABY!!!
 
chevydog66's Avatar
 
Join Date: Oct 2003
Location: Fort Wayne, IN.
Posts: 1,998
Re: LS factory cruise control hook up

Would 1 of these type cruise levers work with 01 6.0 DBW and cruise module? http://www.ebay.com/itm/1971-72-CADI...5e7c01&vxp=mtr

It only has 3 wires, black, blue, and brown.
__________________
2 wrongs don't make a right, but 3 lefts do.

66 Chevelle Malibu 406ci, 573hp, 10.99@121mph
96 Chevy Silverado Z71
72 GMC 1500 Super Custom LS 6.0/4L65 on airride

http://www.cardomain.com/ride/707879...mc-c-k-pick-up
chevydog66 is offline   Reply With Quote
Old 05-29-2012, 10:34 PM   #49
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by chevydog66 View Post
Would 1 of these type cruise levers work with 01 6.0 DBW and cruise module? http://www.ebay.com/itm/1971-72-CADI...5e7c01&vxp=mtr

It only has 3 wires, black, blue, and brown.
It might, but you would only be able to set it, you wouldn't have an on/off or accel/resume.
If you want one of the ones I have pictured I have a few I would sell.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 05-29-2012, 10:54 PM   #50
chevydog66
GM ONLY BABY!!!
 
chevydog66's Avatar
 
Join Date: Oct 2003
Location: Fort Wayne, IN.
Posts: 1,998
Re: LS factory cruise control hook up

Quote:
Originally Posted by ls1nova71 View Post
It might, but you would only be able to set it, you wouldn't have an on/off or accel/resume.
If you want one of the ones I have pictured I have a few I would sell.
Posted via Mobile Device
Ok. Thanks. I would be happy just pushing the button and the cruise would be set. I don't need the fancy on/off or accel/resume.
__________________
2 wrongs don't make a right, but 3 lefts do.

66 Chevelle Malibu 406ci, 573hp, 10.99@121mph
96 Chevy Silverado Z71
72 GMC 1500 Super Custom LS 6.0/4L65 on airride

http://www.cardomain.com/ride/707879...mc-c-k-pick-up
chevydog66 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com