Shaved firewall queston

[jcnelson]

I’m doing a complete frame off restoration and in the middle of smoothing out the firewall. I’ve been through past threads and see a lot of clean beautiful work my queston is the e brake where do you run the cable and the speedo cable

[harpo231]

http://67-72chevytrucks.com/vboard/a...1&d=1514237968

[jcnelson]

Thanks for the input but I was kinda looking for ideas or suggestions as to where and what to use to avoid the clutter coming out of the firewall

[harpo231]

OK didnt read that

[jcnelson]

Ya sorry I just reread it and your right I wasn’t very clear. I want the clean smooth look and want to still have them, if I was going buckets I could adapt one between the seats but I plan on a bench seat. Speedo not to worried about it’s the e brake

[harpo231]

Someone will chime in .

[68Stepbed]

It's hard to see, but my speedo cable and ebrake cable came through the same hole just below the column. I removed the ebrake cable and handle assembly when I changed to rear discs, though. I'll eventually do them correctly and reinstall the cable.

[Rod Run]

You could always go the same route that I am going. Smooth the firewall and use a GPS speedo, that way you don't have to worry about where the cable is going