CPP 5in rear coils and a 1.5 lowering block who runs this set up? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2tontruck · 04-01-2016, 08:42 PM

Working on the suspension for the 72 Suburban and I was wondering if anyone else is running this set up and can provide me with a little feedback. I have a set of 5 inch drop coils, 1.5 lowering block and a ECE track bar kit. I am curious about if these items work together well together. I have a 3 inch spindle in front along with a lowered coil spring as well. As always I appreciate any and all feedback.

2tontruck · 04-02-2016, 01:46 PM

Anyone????

Tork? · 04-03-2016, 11:27 PM

Based on what I've read it should work fine together.

Because I have 5" CPP springs and want to do the blocks too I'll be following and hoping for pics

**juddss** · 04-04-2016, 01:49 PM

Following

BigMike · 04-07-2016, 12:28 AM

I had CPP 5" springs with 1" blocks in the rear with CPP trac bar and had no issues at all. I don't really think 1/2" would make any difference, you'll be fine.

Now I have bags w/ the 1" blocks that go WAY lower than the 5" springs + 1" blocks did.

69vetteside · 04-18-2016, 09:31 AM

i had 5in and 2in blocks and all worked fine.
now am about to run 6in with 2in blocks with notch.

04-01-2016, 08:42 PM	#1
2tontruck Registered User Join Date: Sep 2003 Location: Omaha,Ne Posts: 108	CPP 5in rear coils and a 1.5 lowering block who runs this set up? Working on the suspension for the 72 Suburban and I was wondering if anyone else is running this set up and can provide me with a little feedback. I have a set of 5 inch drop coils, 1.5 lowering block and a ECE track bar kit. I am curious about if these items work together well together. I have a 3 inch spindle in front along with a lowered coil spring as well. As always I appreciate any and all feedback.

04-02-2016, 01:46 PM	#2
2tontruck Registered User Join Date: Sep 2003 Location: Omaha,Ne Posts: 108	Re: CPP 5in rear coils and a 1.5 lowering block who runs this set up? Anyone????

04-03-2016, 11:27 PM	#3
Tork? Registered User Join Date: May 2013 Location: Chicago, IL Posts: 217	Re: CPP 5in rear coils and a 1.5 lowering block who runs this set up? Based on what I've read it should work fine together. Because I have 5" CPP springs and want to do the blocks too I'll be following and hoping for pics

04-04-2016, 01:49 PM	#4
juddss Senior Member Join Date: Jul 2015 Location: Syracuse NY Posts: 206	Re: CPP 5in rear coils and a 1.5 lowering block who runs this set up? Following

04-07-2016, 12:28 AM	#5
BigMike Registered User Join Date: Sep 2004 Location: Rancho Santa Margarita - SoCal Posts: 1,432	Re: CPP 5in rear coils and a 1.5 lowering block who runs this set up? I had CPP 5" springs with 1" blocks in the rear with CPP trac bar and had no issues at all. I don't really think 1/2" would make any difference, you'll be fine. Now I have bags w/ the 1" blocks that go WAY lower than the 5" springs + 1" blocks did. __________________ Mike My 69 SWB Project Father/Son 72 Nova Project My Airbrushed RC Car Bodies

04-18-2016, 09:31 AM	#6
69vetteside Registered User Join Date: Nov 2011 Location: perth western australia Posts: 127	Re: CPP 5in rear coils and a 1.5 lowering block who runs this set up? i had 5in and 2in blocks and all worked fine. now am about to run 6in with 2in blocks with notch.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.