The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   4x4 Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=141)
-   -   my radical 4x4 dually project (https://67-72chevytrucks.com/vboard/showthread.php?t=178608)

chosn 1 06-02-2013 06:09 PM

Re: my radical 4x4 dually project
 
Thx Billhilly, I wanted to get some "flow" from the curvy lines of the truck to flow into the deck so I started with the headboard !
Come on by, we'll take her for a drive an squeeze an I will show ya around !!!

chosn 1 06-02-2013 06:12 PM

Re: my radical 4x4 dually project
 
1 Attachment(s)
Hmmmm, I have an idear

chosn 1 06-02-2013 06:26 PM

Re: my radical 4x4 dually project
 
2 Attachment(s)
finally settled on how to do the intake system ! ,don't have a finished pic yet tho !

chosn 1 06-02-2013 06:34 PM

Re: my radical 4x4 dually project
 
3 Attachment(s)
went out to the back 40 and rummaged thru all my spare parts and found two not bad hdlt trim rings so after 2 hrs with hammer an dolly an power polishing the front clip is now finished as well !

chosn 1 06-02-2013 06:44 PM

Re: my radical 4x4 dually project
 
4 Attachment(s)
and back to my idear, to me stacks belong on big rigs..........a Hotrod should have lake pipes :four:

Billhilly 06-02-2013 07:01 PM

Re: my radical 4x4 dually project
 
Oh yeah! That looks pretty quiet! Great work.

Quote:

Originally Posted by chosn 1 (Post 6103840)
Come on by, we'll take her for a drive an squeeze an I will show ya around !!!

Yeah, some time for sure. Apparently it's my kids turn next. At (nearly) 18 she is off in 22 days for a global tour (and six months college in Switzerland). First stop Van, then Calgary, then Kelowna where I used to live. Some peoples kids!!

chosn 1 06-02-2013 07:27 PM

Re: my radical 4x4 dually project
 
2 Attachment(s)
also got the wiper system worked out and the cowl tin installed, and they work, yay!, getting down to the nitty gritty stuff now !!!

1985-GMC 06-03-2013 11:39 AM

Re: my radical 4x4 dually project
 
Looking good! I like those lake pipes!
Posted via Mobile Device

chosn 1 06-03-2013 11:46 PM

Re: my radical 4x4 dually project
 
Thx 85, im gonna make up aluminum caps with fins and brass wing nuts to finish em off and the stainless band is for a little step to help get me up in the cab when the air springs are full
Posted via Mobile Device

chosn 1 01-24-2016 12:30 PM

Re: my radical 4x4 dually project
 
5 Attachment(s)
few more things complete since last posts, running board/lakepipes complete except for caps, front bumper complete and mounted and wired, deck is done except powdercoat.

chosn 1 01-24-2016 12:39 PM

Re: my radical 4x4 dually project
 
4 Attachment(s)
more pics

coggonobrien 01-25-2016 08:34 AM

Re: my radical 4x4 dually project
 
are the pipes insulated at all?

chosn 1 01-25-2016 10:22 PM

Re: my radical 4x4 dually project
 
noy gonna run exhaust through em, they are running boards/lake pipes

chosn 1 03-08-2016 01:20 AM

Re: my radical 4x4 dually project
 
Finally getting a little bit more done on my seemingly lifetime project..........!
Drivers door is almost done, pwr windows and door latch solenoid courtesy of a 65 olds delta 88, working perfectly too!, vent window now complete and functional, window goes up and down like jack the bear!!!,(probably because there's only half the glass to move now!, way better than cranking for sure.
1" felt underlay and black auto carpet right from as high as I could go up the firewall to the back of the cab.
Kick panels are done with some bronze sheeting with a little polishing.
Pics won't load tonight so I'll try tomorrow.
Cheers.....

chosn 1 03-08-2016 10:19 PM

Re: my radical 4x4 dually project
 
5 Attachment(s)
some door pics

chosn 1 03-08-2016 11:24 PM

Re: my radical 4x4 dually project
 
1 Attachment(s)
mid speaker pic

chosn 1 03-08-2016 11:35 PM

Re: my radical 4x4 dually project
 
5 Attachment(s)
carpet install, flat floor made it easy!,2500 watts of MA amps, 2-10" 1000 watt dual coil subs all done and ready for testing. now onto final dash wiring then gauges can go in!!!
Damn this **** takes forever to do!!!

chosn 1 03-08-2016 11:51 PM

Re: my radical 4x4 dually project
 
5 Attachment(s)
Since I never had a proper gauge cluster I had to improvise , so I took another glove box lid and removed the backside, tacked on some blind mounting bolts, cut out where I needed the gauges to go, covered it in black leather, I had some real bronze 16 ga sheeting that an artist friend gave me, made an insert for the glove box lid and mounted my autometer gauges into it, they were a freebie that a bud gave me about 10 to 12 yrs ago!
Also mounted the airride controls,boost and trans temp gauges I had kickin around.
All in all it took about 10 hrs to make and total cost was about 30 bucks, much cheaper than those real cool clusters a guy can get for 67-72 trucks nowadays and I can say I did it myself!!!
Thanks for lookin......Cheers.....Kev.

chosn 1 04-24-2016 03:56 PM

Re: my radical 4x4 dually project
 
3 Attachment(s)
couple updates... ,I made a few more things out of bronze sheeting, a shifter boot rind and both kick panels.

chosn 1 04-24-2016 04:01 PM

Re: my radical 4x4 dually project
 
3 Attachment(s)
found a site called seatbelt planet.com and ordered up a full set of seatbelts for the old girl, they were super easy to deal with and arrived within a week, top notch company for sure.

chosn 1 04-24-2016 04:19 PM

Re: my radical 4x4 dually project
 
5 Attachment(s)
also found a company called stock interiors and ordered up replacement fabrics for my 88-94 chev bench seat, it took about 2 1/2 weeks for these to show up and couldn't get any reply from them in the interm, I was worried that I got ripped off but pkg showed up just as I was filing a complaint with c card company. I got right to doing the re and re and the seat turned out awesome! very happy with the product ,not so much with the customer support tho!

chosn 1 04-24-2016 04:25 PM

Re: my radical 4x4 dually project
 
1 Attachment(s)
Had one BIG F#@KUP tho, forgot to pull off the wiper arms while wiring up the wiper motor resulting in a huge scratch on the new windshield from a little pc of grit stuck to the wiper, now I gotta cut another windshield down to fit....GRRRR!

chosn 1 04-24-2016 05:13 PM

Re: my radical 4x4 dually project
 
1 Attachment(s)
Pic of finished shifter boot, boot was from a 1970's 4 spd hurst olds i had wrecked about 30 yrs ago!

chosn 1 04-24-2016 05:18 PM

Re: my radical 4x4 dually project
 
1 Attachment(s)
View of the boot and flat floor

chosn 1 04-24-2016 05:31 PM

Re: my radical 4x4 dually project
 
Deck is out for powdercoat now so hopefully it will be on the road by June cause I gotta get about 20 cord of logs pulled outa the bush near Spirit lake Idaho where we're gonna put up a cabin on our land 😊

coggonobrien 04-25-2016 08:02 AM

Re: my radical 4x4 dually project
 
looks good

Dieselwrencher 04-25-2016 09:17 PM

Re: my radical 4x4 dually project
 
Great work! You're right. All that finish work on the interior can eat up the time! A cabin sounds like a sweet deal too! Take pics and share them if you don't mind.

chosn 1 04-26-2016 10:34 AM

Re: my radical 4x4 dually project
 
Ya it sure does, will be taking lots of pics, kinda waiting for the Cdn dollar to get a bit better to order cabin pkg, but got lot of clearing to do anyways!

chosn 1 05-25-2016 02:40 PM

Re: my radical 4x4 dually project
 
Well I guess that by the whoopin im takin in the june contest ,I'm definatly disappointed that there isn't much interest in my project so i'll quit boring you with the other picks of the welding and hiab crane decks, thanks much to those that did show some interest tho.
cheers....
Kev.

1985-GMC 05-26-2016 12:47 AM

Re: my radical 4x4 dually project
 
I haven't been on here much but I definitely dig all the work you've done. Everything looks great! And that really sucks about the windshield! Back in high school I was looking at a truck I was about to buy and I noticed it was missing the driver side wiper blade, my step-dad didn't notice and turned on the wipers... I ended up buying the truck and just lived with the scratch just like that for the next 3 or 4 years until I sold it.

You said you're building a log cabin?

Dieselwrencher 05-26-2016 01:22 AM

Re: my radical 4x4 dually project
 
Quote:

Originally Posted by chosn 1 (Post 7604912)
Well I guess that by the whoopin im takin in the june contest ,I'm definatly disappointed that there isn't much interest in my project so i'll quit boring you with the other picks of the welding and hiab crane decks, thanks much to those that did show some interest tho.
cheers....
Kev.

Don't get discouraged man! I for one like your truck and have been following along since you posted it so don't quit on us now. :mm: You had some real stiff competition in there. Mosesburb's rig is winning and rightfully so. That is a well set up, well used trail rig that sees many miles on roads that hardly anyone travels. 6bt 56's truck is a very nice converted truck and has a nice original look. And Lower50's has done a great job too. It is a hard choice. I wanted to vote for all my diesel brothers. :waah: If I were you I'd feel proud that your truck is nearly done and you can start using it. :metal:

chosn 1 05-26-2016 09:09 PM

Re: my radical 4x4 dually project
 
Quote:

Originally Posted by 1985-GMC (Post 7605498)
I haven't been on here much but I definitely dig all the work you've done. Everything looks great! And that really sucks about the windshield! Back in high school I was looking at a truck I was about to buy and I noticed it was missing the driver side wiper blade, my step-dad didn't notice and turned on the wipers... I ended up buying the truck and just lived with the scratch just like that for the next 3 or 4 years until I sold it.

You said you're building a log cabin?

Thanks 85!, it just kinda hit me as tho maybe I built an albatross and folks were thinkin wtf is this abortion!

chosn 1 05-26-2016 09:18 PM

Re: my radical 4x4 dually project
 
Quote:

Originally Posted by Dieselwrencher (Post 7605519)
Don't get discouraged man! I for one like your truck and have been following along since you posted it so don't quit on us now. :mm: You had some real stiff competition in there. Mosesburb's rig is winning and rightfully so. That is a well set up, well used trail rig that sees many miles on roads that hardly anyone travels. 6bt 56's truck is a very nice converted truck and has a nice original look. And Lower50's has done a great job too. It is a hard choice. I wanted to vote for all my diesel brothers. :waah: If I were you I'd feel proud that your truck is nearly done and you can start using it. :metal:

Thanks DW, I guess I thought it would be more warmly received! It was really a fun build and I'm happy with it, maybe if i post some pics with it workin and wheelin up the cutlines and full of battle wounds it'll get a better reception!
It's nice to know a few like it!

Dieselwrencher 05-26-2016 09:56 PM

Re: my radical 4x4 dually project
 
Quote:

Originally Posted by chosn 1 (Post 7606379)
Thanks DW, I guess I thought it would be more warmly received! It was really a fun build and I'm happy with it, maybe if i post some pics with it workin and wheelin up the cutlines and full of battle wounds it'll get a better reception!
It's nice to know a few like it!

In the end, the only person that needs to like it is you. If some do not like it, they can pound sand. :lol: :metal: Just my .02 on it. :censored:

jae 05-31-2016 11:52 AM

Re: my radical 4x4 dually project
 
Man, please don't stop with the updates! I hadn't seen this build before, but I love it! I think this is the first time I've seen a chop top on a truck that wasn't slammed and I really like how it looks. I also dig the changeable bed system you've got set up and look forward to seeing some pics of your rig in use. Nothing better than a custom truck that's actually usable.

chosn 1 06-02-2016 12:42 AM

Re: my radical 4x4 dually project
 
Thx Jae!, I just dug my other two roll off framerail assy's outta the back forty and gonna do a bit o measuring and dreamin and schemin ,I think im up to build a full on service deck with hiab mini picker, real old but healthy miller big 40 gas motor compressor, torch and full tool set like i used to run!

swamp rat 06-02-2016 11:27 PM

Re: my radical 4x4 dually project
 
I have not seen the June contest so its irrelevant, keep on posting! Nice truck, keep at it!

chosn 1 06-05-2016 08:40 PM

Re: my radical 4x4 dually project
 
3 Attachment(s)
pulled another one of the trucks I have had since highschool days, this is a 72 gmc with 350 and 4 spd std trans, still had the original mag wheels in the shed so stuck em on and cut a few trees outta the way and pulled her up to the shop, gave it a quick wash and threw the booster cables to the starter and she still turns over:metal:, we'll see if she runs later this week !!!

1985-GMC 06-08-2016 12:00 PM

Re: my radical 4x4 dually project
 
Another good project candidate!

Dieselwrencher 06-08-2016 05:26 PM

Re: my radical 4x4 dually project
 
Very nice! My luck it would be rotted to the ground and the engine would be stuck. :lol:


All times are GMT -4. The time now is 10:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com