Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Im parting out this 3/4 ton 72 SB custom camper:
PO removed the engine/tranny 2 weeks ago.
I drove this truck before he removed the engine/tranny.
This is the last truck Ill part before the winter sarts.
If you see something not listed, just ask!


Rear Slider $100 plus shipping
Clutch delete plate some with hardware $15 shipped
PB booster/rod and hardware $30 plus shipping
Hood Hinges (both operate smooth and tight) $40 plus shipping
Exhaust manifolds sets $50 plus shipping
Camper harness to rear of the truck camper end is cut $75
front (engine) camper harness as well $40 Sold
Upper and lower trim $100 plus shipping Pending sold
Brake pedal assembly $35 plus shippingSold
dash defroster vents $15 Shipped Sold
71/72 gas pedal assembly (with cable) $50 shipped
Parchment visors $55 Shipped
Parchment seat belts w/retractor covers. $75 shipped…
Parchment center belt. $25 shipped.
72 full foam bench seat (working adjuster wire & return spring) $100 no shipping
several sets of seat tracks springs and adjuster wire and springs
Gauges $40 shipped
Door Panels have been painted black w/rattle cans parchment underneath $50 plus shipping
Glove box door $50 shipped

Chassis
2 piece SB Drive Shaft $25 plus shipping (unless you need the yokes)
Rolling Chassis (minus body) $300 If the wheels dont sell
Wheels/Tires $125 plus shipping (w/wo tires)Pending sold
Front end $200 Rust on both cups and Inner fenders
complete Doors $80 each pickup only
Front Bumper slight dent in middle bottom $50 no shipping

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Interested in camper wiring pending pics....intact all the way?

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Also interested in gas cap + defrost vents pending pics. Thanks!

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

I will take the rear slider, my zip is 85029.

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Interested in the exterior handles if they're nice. Pics?

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Is there a power steering hose tie down on this truck? It holds the hoses down to the frame rail. I would buy it from you if it isn't rotten.

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

I'll get you pics tomorrow.

I'll post pics for your review tomorrow first, so you can se it on both sides.

They have some wear on them, pics tomorrow.

I haven't taken it off and checked it all the way to rear. I'll get you some real pics tomorrow. The firewall end looks real nice

I have several of them. $8 shipped

Mike
Posted via Mobile Device

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

condition of Camper scripts. and the inserts that hold them on.

tailgate top trim. 3pcs?

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Hey, interested in both wire harness for camper set up. If no else buys them, I will. Ship to 97050 Oregon. I just bought some items from you. Mike.

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

If I sell the camper emblems I'll let you know!
I will take pics of the tailgate trim for you today after work.

You are second in line for the camper harnesses.
I will make sure they are intact today after work and add some pics.

Mike
Posted via Mobile Device

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Please put me second in line for the upper and lower trim. I only need the lower if u can seperate it. Please message me if the other buyer backs out. Shipping to Kelowna, BC Canada v1y-9w9
Posted via Mobile Device

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

I need a return spring for the seat adjuster handle and seat track return spring.

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

You are second Sir!

Ill get the box together for this stuff, the flapper and spring for the AC you wanted. $25 shipped for it all sound OK?

Mike

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Also, does it have the parking brake return spring?

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Sorry, it does not. :( Broken as usual, on these farm trucks I been getting!
Mike

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Does it have the auxillary battery box on the drivers side radiator suppot?

Interested if in good shape.


72longbed

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Okay thanks. I'd still like to see the handles when you get time.

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

I will take your best one if you will accept paypal. Let me know and I will send $8 right away, at no expense to you of course. Thanks!

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

$25 for all 4 springs shipped? If so, that sounds good to me, send me a pm with payment info.
Thanks,
Gary

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Sorry no aux box on this truck!

I'll have pics in a little bit.

I'll get it sent not to you tomorrow. Sending you pm with pp info.

I'm going to take a pic to ensure it's all there first and then you can ok it all.



Thanks all!

V/R,

Mike
Posted via Mobile Device

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Just shoot me the pics of all the trim mouldings we've discussed when you get em off. Thanks.

Chad

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Cab for sale?

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Will do.

Yes everything is for sale (almost) on this one, the cab braces looked shot today (all 4) and someone rivited the rockers onto the old ones to apprea that they were replaced. Not sure its worth saving but everything else is real nice.:)

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Here goes some pics of the rearslider!
Window is dirty but no scratches and the handle is broken inside.

Re: Parting out 72 Chevy 3/4 ton SB Custom Camper
 

Deadhead:
Camper harness: Power/ground were cut under the cab where the bed meets.
The power wire ran all the way to the distribution block.
No tears or breaks in the insulation with everything that is present!


Katrina:
AC flapper and seat spring pics you requested.

OMODIFIED:
Powersteering holddown pic you requested.