KS Parting out 72 Chevy 3/4 ton SB Custom Camper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 10-14-2012, 10:21 PM

Im parting out this 3/4 ton 72 SB custom camper:
PO removed the engine/tranny 2 weeks ago.
I drove this truck before he removed the engine/tranny.
This is the last truck Ill part before the winter sarts.
If you see something not listed, just ask!

Rear Slider $100 plus shipping
Clutch delete plate some with hardware $15 shipped
PB booster/rod and hardware $30 plus shipping
Hood Hinges (both operate smooth and tight) $40 plus shipping
Exhaust manifolds sets $50 plus shipping
Camper harness to rear of the truck camper end is cut $75
front (engine) camper harness as well $40 Sold
Upper and lower trim $100 plus shipping Pending sold
Brake pedal assembly $35 plus shippingSold
dash defroster vents $15 Shipped Sold
71/72 gas pedal assembly (with cable) $50 shipped
Parchment visors $55 Shipped
Parchment seat belts w/retractor covers. $75 shipped…
Parchment center belt. $25 shipped.
72 full foam bench seat (working adjuster wire & return spring) $100 no shipping
several sets of seat tracks springs and adjuster wire and springs
Gauges $40 shipped
Door Panels have been painted black w/rattle cans parchment underneath $50 plus shipping
Glove box door $50 shipped

Chassis
2 piece SB Drive Shaft $25 plus shipping (unless you need the yokes)
Rolling Chassis (minus body) $300 If the wheels dont sell
Wheels/Tires $125 plus shipping (w/wo tires)Pending sold
Front end $200 Rust on both cups and Inner fenders
complete Doors $80 each pickup only
Front Bumper slight dent in middle bottom $50 no shipping

**DeadheadNM** · 10-14-2012, 10:24 PM

Interested in camper wiring pending pics....intact all the way?

**DeadheadNM** · 10-14-2012, 10:27 PM

Quote:

Originally Posted by DeadheadNM

Interested in camper wiring pending pics....intact all the way?

Also interested in gas cap + defrost vents pending pics. Thanks!

landsurvey1 · 10-14-2012, 10:37 PM

I will take the rear slider, my zip is 85029.

**cericd** · 10-14-2012, 10:39 PM

Interested in the exterior handles if they're nice. Pics?

**omodified** · 10-14-2012, 10:44 PM

Is there a power steering hose tie down on this truck? It holds the hoses down to the frame rail. I would buy it from you if it isn't rotten.

**Cash3481** · 10-14-2012, 10:55 PM

Quote:

Originally Posted by DeadheadNM

Also interested in gas cap + defrost vents pending pics. Thanks!

I'll get you pics tomorrow.

Quote:

Originally Posted by landsurvey1

I will take the rear slider, my zip is 85029.

I'll post pics for your review tomorrow first, so you can se it on both sides.

Quote:

Originally Posted by cericd

Interested in the exterior handles if they're nice. Pics?

They have some wear on them, pics tomorrow.

Quote:

Originally Posted by DeadheadNM

Interested in camper wiring pending pics....intact all the way?

I haven't taken it off and checked it all the way to rear. I'll get you some real pics tomorrow. The firewall end looks real nice

Quote:

Originally Posted by omodified

Is there a power steering hose tie down on this truck? It holds the hoses down to the frame rail. I would buy it from you if it isn't rotten.

I have several of them. $8 shipped

Mike
Posted via Mobile Device

**thelonerife** · 10-14-2012, 11:19 PM

condition of Camper scripts. and the inserts that hold them on.

tailgate top trim. 3pcs?

bronze 72 super · 10-15-2012, 12:29 AM

Hey, interested in both wire harness for camper set up. If no else buys them, I will. Ship to 97050 Oregon. I just bought some items from you. Mike.

**Cash3481** · 10-15-2012, 06:30 AM

Quote:

Originally Posted by thelonerife

condition of Camper scripts. and the inserts that hold them on.

tailgate top trim. 3pcs?

If I sell the camper emblems I'll let you know!
I will take pics of the tailgate trim for you today after work.

Quote:

Originally Posted by bronze 72 super

Hey, interested in both wire harness for camper set up. If no else buys them, I will. Ship to 97050 Oregon. I just bought some items from you. Mike.

You are second in line for the camper harnesses.
I will make sure they are intact today after work and add some pics.

Mike
Posted via Mobile Device

Square_78 · 10-15-2012, 08:36 AM

Please put me second in line for the upper and lower trim. I only need the lower if u can seperate it. Please message me if the other buyer backs out. Shipping to Kelowna, BC Canada v1y-9w9
Posted via Mobile Device

Katrina/10 · 10-15-2012, 10:46 AM

I need a return spring for the seat adjuster handle and seat track return spring.

**Cash3481** · 10-15-2012, 11:31 AM

Quote:

Originally Posted by Square_78

Please put me second in line for the upper and lower trim. I only need the lower if u can seperate it. Please message me if the other buyer backs out. Shipping to Kelowna, BC Canada v1y-9w9
Posted via Mobile Device

You are second Sir!

Quote:

Originally Posted by Katrina/10

I need a return spring for the seat adjuster handle and seat track return spring.

Ill get the box together for this stuff, the flapper and spring for the AC you wanted. $25 shipped for it all sound OK?

Mike

**cericd** · 10-15-2012, 11:42 AM

Also, does it have the parking brake return spring?

**Cash3481** · 10-15-2012, 12:00 PM

Quote:

Originally Posted by cericd

Also, does it have the parking brake return spring?

Sorry, it does not.

Broken as usual, on these farm trucks I been getting!
Mike

*72longbed* · 10-15-2012, 12:23 PM

Does it have the auxillary battery box on the drivers side radiator suppot?

Interested if in good shape.

72longbed

**cericd** · 10-15-2012, 01:02 PM

Okay thanks. I'd still like to see the handles when you get time.

**omodified** · 10-15-2012, 02:49 PM

Quote:

Originally Posted by Cash3481

I have several of them. $8 shipped

Mike
Posted via Mobile Device

I will take your best one if you will accept paypal. Let me know and I will send $8 right away, at no expense to you of course. Thanks!

Katrina/10 · 10-15-2012, 05:20 PM

Quote:

Originally Posted by Cash3481

You are second Sir!

Ill get the box together for this stuff, the flapper and spring for the AC you wanted. $25 shipped for it all sound OK?

Mike

$25 for all 4 springs shipped? If so, that sounds good to me, send me a pm with payment info.
Thanks,
Gary

**Cash3481** · 10-15-2012, 05:25 PM

Quote:

Originally Posted by 72longbed

Does it have the auxillary battery box on the drivers side radiator suppot?

Interested if in good shape.

72longbed

Sorry no aux box on this truck!

Quote:

Originally Posted by cericd

Okay thanks. I'd still like to see the handles when you get time.

I'll have pics in a little bit.

Quote:

Originally Posted by omodified

I will take your best one if you will accept paypal. Let me know and I will send $8 right away, at no expense to you of course. Thanks!

I'll get it sent not to you tomorrow. Sending you pm with pp info.

Quote:

Originally Posted by Katrina/10

$25 for all 4 springs shipped? If so, that sounds good to me, send me a pm with payment info.
Thanks,
Gary

I'm going to take a pic to ensure it's all there first and then you can ok it all.

Thanks all!

V/R,

Mike
Posted via Mobile Device

496bb · 10-15-2012, 07:56 PM

Just shoot me the pics of all the trim mouldings we've discussed when you get em off. Thanks.

Chad

Rob68c10 · 10-15-2012, 08:16 PM

Cab for sale?

**Cash3481** · 10-15-2012, 08:29 PM

Quote:

Originally Posted by 496bb

Just shoot me the pics of all the trim mouldings we've discussed when you get em off. Thanks.

Chad

Will do.

Quote:

Originally Posted by Rob68c10

Cab for sale?

Yes everything is for sale (almost) on this one, the cab braces looked shot today (all 4) and someone rivited the rockers onto the old ones to apprea that they were replaced. Not sure its worth saving but everything else is real nice.

**Cash3481** · 10-15-2012, 08:52 PM

Here goes some pics of the rearslider!
Window is dirty but no scratches and the handle is broken inside.

**Cash3481** · 10-15-2012, 09:01 PM

Deadhead:
Camper harness: Power/ground were cut under the cab where the bed meets.
The power wire ran all the way to the distribution block.
No tears or breaks in the insulation with everything that is present!

Katrina:
AC flapper and seat spring pics you requested.

OMODIFIED:
Powersteering holddown pic you requested.

10-14-2012, 10:21 PM	#1
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Parting out 72 Chevy 3/4 ton SB Custom Camper Im parting out this 3/4 ton 72 SB custom camper: PO removed the engine/tranny 2 weeks ago. I drove this truck before he removed the engine/tranny. This is the last truck Ill part before the winter sarts. If you see something not listed, just ask! Rear Slider $100 plus shipping Clutch delete plate some with hardware $15 shipped PB booster/rod and hardware $30 plus shipping Hood Hinges (both operate smooth and tight) $40 plus shipping Exhaust manifolds sets $50 plus shipping Camper harness to rear of the truck camper end is cut $75 front (engine) camper harness as well $40 Sold Upper and lower trim $100 plus shipping Pending sold Brake pedal assembly $35 plus shippingSold dash defroster vents $15 Shipped Sold 71/72 gas pedal assembly (with cable) $50 shipped Parchment visors $55 Shipped Parchment seat belts w/retractor covers. $75 shipped… Parchment center belt. $25 shipped. 72 full foam bench seat (working adjuster wire & return spring) $100 no shipping several sets of seat tracks springs and adjuster wire and springs Gauges $40 shipped Door Panels have been painted black w/rattle cans parchment underneath $50 plus shipping Glove box door $50 shipped Chassis 2 piece SB Drive Shaft $25 plus shipping (unless you need the yokes) Rolling Chassis (minus body) $300 If the wheels dont sell Wheels/Tires $125 plus shipping (w/wo tires)Pending sold Front end $200 Rust on both cups and Inner fenders complete Doors $80 each pickup only Front Bumper slight dent in middle bottom $50 no shipping Attached Images Last edited by Cash3481; 10-25-2012 at 11:55 PM.

10-14-2012, 10:24 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,310	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Interested in camper wiring pending pics....intact all the way? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-14-2012, 10:37 PM	#4
landsurvey1 Registered User Join Date: Jan 2009 Location: Arizona Posts: 404	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper I will take the rear slider, my zip is 85029. __________________ 1972 Chevy short bed ZZ4 350/355hp GMPP crate engine. 1972 Cheyenne K-20 454/400hp big block 1988 Jeep Wrangler 2010 Jeep Sport Unlimited

10-14-2012, 10:39 PM	#5
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,105	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Interested in the exterior handles if they're nice. Pics?

10-14-2012, 10:44 PM	#6
omodified Senior Member Join Date: Jul 2010 Location: Race City U.S.A. Posts: 1,006	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Is there a power steering hose tie down on this truck? It holds the hoses down to the frame rail. I would buy it from you if it isn't rotten. __________________ Board Member #87725 My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=813848

10-14-2012, 11:19 PM	#8
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper condition of Camper scripts. and the inserts that hold them on. tailgate top trim. 3pcs? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-15-2012, 12:29 AM	#9
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,187	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Hey, interested in both wire harness for camper set up. If no else buys them, I will. Ship to 97050 Oregon. I just bought some items from you. Mike.

10-15-2012, 08:36 AM	#11
Square_78 Registered User Join Date: Mar 2012 Location: Okanagan Valley, BC, Canada Posts: 1,237	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Please put me second in line for the upper and lower trim. I only need the lower if u can seperate it. Please message me if the other buyer backs out. Shipping to Kelowna, BC Canada v1y-9w9 Posted via Mobile Device __________________ #teamlongbed "I refuse to go disc brakes. I actually love drum brakes. It makes for an adventure." - 50bomb 1978 Chevy shop truck - static 6/8" 1970 GMC 1500 - Accuair eLevel Resto-mod http://67-72chevytrucks.com/vboard/s...d.php?t=537497

10-15-2012, 10:46 AM	#12
Katrina/10 Registered User Join Date: Oct 2010 Location: Ocean Springs, MS Posts: 1,746	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper I need a return spring for the seat adjuster handle and seat track return spring. __________________ Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100

10-15-2012, 11:42 AM	#14
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,105	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Also, does it have the parking brake return spring?

10-15-2012, 12:23 PM	#16
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Does it have the auxillary battery box on the drivers side radiator suppot? Interested if in good shape. 72longbed

10-15-2012, 01:02 PM	#17
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,105	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Okay thanks. I'd still like to see the handles when you get time.

10-15-2012, 07:56 PM	#21
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 281	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Just shoot me the pics of all the trim mouldings we've discussed when you get em off. Thanks. Chad

10-15-2012, 08:16 PM	#22
Rob68c10 Registered User Join Date: Mar 2010 Location: Eastern Shore, Maryland Posts: 159	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Cab for sale?

10-15-2012, 08:52 PM	#24
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Here goes some pics of the rearslider! Window is dirty but no scratches and the handle is broken inside. Attached Images



Register or Log In To remove these advertisements.

10-15-2012, 09:01 PM	#25
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Deadhead: Camper harness: Power/ground were cut under the cab where the bed meets. The power wire ran all the way to the distribution block. No tears or breaks in the insulation with everything that is present! Katrina: AC flapper and seat spring pics you requested. OMODIFIED: Powersteering holddown pic you requested. Attached Images

Register or Log In To remove these advertisements.