FS: BBC/TH400 No Hole High Hump Tunnel Covers
5 Attachment(s)
All of these pictured no hole high hump bolt in tunnel covers were removed from 2wd BBC/Th400 automatic trans trucks, the two covers pictured on the left are $115. plus ship, the one pictured on the right is $150. plus ship and has the factory stamped hole floor ring section cut out & removed complete from the trucks floor pan. Some guys like purchasing and using this method as they can then also use the OE spot welded nut strips and bolts while doing the conversion. If interested in one, let me know your ship to Zip and confirm if its going to a residential or business address and I will get you a shipping quote. Thanks, Mel. :chevy:
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
4 Attachment(s)
This one was removed from a 68 BBC/TH400 truck...
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Interested in the one on the far right zip is 06010 residence
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
Option #1 ship as pictured complete and still bolted together to Bristol, CT. 06010 / $49.61 sent via Fedex 5 business day home delivery. Option #2 unbolt tunnel from floor pan ring and cut floor pan into four sections (between nut strips) pack/send all pieces to Bristol, CT. 06010 / $36.20 sent via Fedex 5 business day home delivery. |
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
How about the one in the middle to commercial address to 93611?
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
I would like the one on the far left in the picture top left with the three shown.
71107 it is a business or commercial address. Thanks, Pat |
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
Thanks |
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Payment sent
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Still have one of these left? I'll take you one if so pm me total shipped to 41042 business address.
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
I don't need the extra part.
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
I'll take it, sending payment
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Do you still have 1 available?
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Hump on the right still available?
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Quote:
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
I'll get in line for the green one if Eagle doesn't do it. Cost to ship to 35613 residential? I'd probably go with the cut option. Just the three nut plate sections, bolts, and tunnel. Don't need what's left after that. Thanks.
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
Out of curiousity, how are the nut plates attached? Are they spot welded, tack welded on whole edge, tacked in a few spots, glued, etc? Thanks.
|
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
I actually already have a couple of high hump covers, I was mainly interested in this one for the section of the cab floor that is with it.
Mel/General23cmp, maybe we could separate the two pieces if General just needs the hump? |
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
That's ok Eagle, it's yours if you want it. I was looking for the whole package including the nut plates too. No big deal.
I'll take it if you decide to not to buy. |
Re: FS: BBC/TH400 No Hole High Hump Tunnel Covers
You take it man, I've got others.:metal:
|
All times are GMT -4. The time now is 09:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com