The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Detailing (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=65)
-   -   Aluminum cleaner?? (https://67-72chevytrucks.com/vboard/showthread.php?t=196940)

oscareltemblo 04-21-2006 10:45 PM

Aluminum cleaner??
 
I need an aluminum liquid cleaner to clean up the 6.0 that I bought any suggestions?

68 short step 04-21-2006 10:57 PM

Re: Aluminum cleaner??
 
oven cleaner

oscareltemblo 04-21-2006 11:03 PM

Re: Aluminum cleaner??
 
I bought some oven cleaner in the dollar store so that will take care of it thanks.

Green Machine 04-22-2006 12:59 AM

Re: Aluminum cleaner??
 
DO NOT use oven cleaner on aluminum, you'll be very very sorry, read the can label !!!

What are you trying to get off, light grease ??? Mix up some dish soap or Simple Green 50/50 with water and spray it on, let it soak for a whaile and hit with a power washer or car wash.

oscareltemblo 04-22-2006 02:08 AM

Re: Aluminum cleaner??
 
My friend told me touse Aluma Brite has any one used it before?

Mudder 04-22-2006 06:04 AM

Re: Aluminum cleaner??
 
What are you cleaning?
Lots of cleaners and chemicals will etch aluminum.

70GMCer 04-22-2006 06:48 AM

Re: Aluminum cleaner??
 
NO OVEN CLEANER!!!! I always use "Simple Green" or "Castrol Super Clean" on aluminum. Oven cleaner can turn the aluminum black and can etch it bad....

greasemonkey 04-22-2006 11:48 AM

Re: Aluminum cleaner??
 
Castrol Super Clean can also etch aluminum, I found out the hard way.
How about regular engine cleaner? I have had good luck with Foamy Engine Brite, I think it is safe for aluminum.

70c10 04-22-2006 12:11 PM

Re: Aluminum cleaner??
 
I also like the Foamy engine brite for engines!

rigon4 04-22-2006 12:21 PM

Re: Aluminum cleaner??
 
if you live near a truck stop they will have aluminum acid takes every thing off

jakeslim 04-22-2006 12:28 PM

Re: Aluminum cleaner??
 
Mequires aluminum cleaner works great.

68 short step 04-22-2006 02:51 PM

Re: Aluminum cleaner??
 
i use oven cleaner on all my stuff.... never had any problem with it.......need pics of how it cleans up
http://www.ls1tech.com/forums/showth...7&page=1&pp=20
never had any problems with it. been doing this for over 6 yrs now too.

cdowns 04-22-2006 03:42 PM

Re: Aluminum cleaner??
 
water will work just fine if it's run thru a pressure washer

70short/step 04-22-2006 05:16 PM

Re: Aluminum cleaner??
 
Oven cleaner will work if you plan on painting it like 68 short step did.
But it will turn it colors you dont want if you want to leave it bare aluminum! So Dont use OVEN CLEANER!

ratrod67 04-22-2006 05:28 PM

Re: Aluminum cleaner??
 
This is what you want to use.

http://www.eagleone.com/pages/produc...=1001&cat=5006

Joeys Toy 04-22-2006 07:41 PM

Re: Aluminum cleaner??
 
Use Aluma Brite at work on diamond plate aluminum plates on exterior of truck. Removed all stains. looks good. just spray it on and let it do the work. Think we got it at B-Line.

wibilly 04-22-2006 10:26 PM

Re: Aluminum cleaner??
 
most boat shops will have products to safely clean and pollish aluminum as well


All times are GMT -4. The time now is 06:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com