What clutch master-cylinder are you guys using for T56 trans
I am finally at the point where I can install my clutch system. Here is a master-cylinder I am looking at purchasing from EBay.
http://cgi.ebay.com/ws/eBayISAPI.dll...tchlink:top:en. Anyone using this setup? Can you post pictures? If not, what are you using, and can you post pics. Thanks, |
Re: What clutch master-cylinder are you guys using for T56 trans
Within a couple weeks I should have my brake booster bracket with the hydraulic clutch conversion for the '67-'72's done. It will be basically the same as what I currently make for the '60-'62's. There is a link to the for sale thread in my sig line.
|
Re: What clutch master-cylinder are you guys using for T56 trans
|
Re: What clutch master-cylinder are you guys using for T56 trans
Quote:
http://www.customclassictrucks.com/t...t/viewall.html "To actuate the hydraulic throwout bearing on our Tremec, we’ll be using a Wilwood ¾-inch bore master cylinder (260-10282) coupled with their new billet reservoir (260- 12696)." |
Re: What clutch master-cylinder are you guys using for T56 trans
I will look tonight, I kept the box I believe incase I needed a new one later. It is a "cheapy" from Orielly
|
Re: What clutch master-cylinder are you guys using for T56 trans
Quote:
Quote:
Quote:
Thanks |
Re: What clutch master-cylinder are you guys using for T56 trans
1 Attachment(s)
I used on of CaptainFabs hydraulic kits on my 63. Great product. I have a novak kit installed on the bellhousing.
|
Re: What clutch master-cylinder are you guys using for T56 trans
Yeah Capt I'll be home on the 10th and can't wait to install your bracket
|
Re: What clutch master-cylinder are you guys using for T56 trans
Quote:
Quote:
|
Re: What clutch master-cylinder are you guys using for T56 trans
I am also about to begin my t56 install and will be looking for master cyl ideas.
|
Re: What clutch master-cylinder are you guys using for T56 trans
I am going to do a T56 swap this winter. I was thinking of trying to use the factory master cylinder from a 98-02 Camaro. I am not sure yet if it would work, the hose might not be long enough and it mounts on a angle.
Has anybody ever tried this before? I hate to start something and have nothing but trouble. Thanks, Joe |
Re: What clutch master-cylinder are you guys using for T56 trans
like you said, it mounts on that angle, which sucks.
i've been squirreling parts for my 6mt swap and i'm gonna run with a tilton 7/8" mc |
Re: What clutch master-cylinder are you guys using for T56 trans
Any updates on some installs ? I really like the wilwood in the first post but seems kinda pricey.
|
Re: What clutch master-cylinder are you guys using for T56 trans
I decided since I had to pull the body off to do my suspension install that I would go ahead and clean the frame up. I'm about to start putting everything back together. So in the next few weeks I hope to have installed pics
|
Re: What clutch master-cylinder are you guys using for T56 trans
What master are you using ?
|
Re: What clutch master-cylinder are you guys using for T56 trans
1 Attachment(s)
I ended up finding a master cylinder at an off-road shop here in Vegas. It's made by JAMAR and was $100. I liked that it's all aluminum and black (no plastic). It should look good in my engine compartment:metal:
|
Re: What clutch master-cylinder are you guys using for T56 trans
1 Attachment(s)
Engine compartment pic
|
Re: What clutch master-cylinder are you guys using for T56 trans
That looks nice. Do you have a part number for it ? Hard to tell in the picture how you are mounting it to the firewall. I'm assuming your not running a booster.
|
Re: What clutch master-cylinder are you guys using for T56 trans
Quote:
|
Re: What clutch master-cylinder are you guys using for T56 trans
Sorry. I'm on the hunt for a brake master and just got confused.
|
All times are GMT -4. The time now is 05:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com