Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
BOTH PEDAL ASSEMBLIES HAVE BEEN SOLD! I have came up with 2 more of these. One is for hydroboost brakes and one is for vacuum brakes. Hydroboost is on the left. This is higher priced than most you will find for sale. It is also nicer than all of the other out there These have brand new bushings in both the clutch and brake pedals. The result is smooth pedals with very little play in them. Price is only marked up according to my cost on bushings($24) and having the pedals welded. Many other selersl post pedal assemblies for sale. Most if not ALL have wear to the pin that the clutch master cylinder attaches to. None of my pedal assemblies have this issue. I only sell the best quality available. Mine have all been professionally welded, ground and then filed smooth to work as new. When these pieces get worn it causes the pedal to not engage the clutch properly thus make it hard to go into gear. Even if you don't buy from me, do yourself a favor and ask other sellers if their pedals have this problem. Price is $250 EACH not including shipping. I also have a complete hydraulic conversion if needed.
http://img.photobucket.com/albums/v9...ps1c693805.jpg http://img.photobucket.com/albums/v9...ps7b20f725.jpg http://img.photobucket.com/albums/v9...ps8a76efdb.jpg |
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
how much for complete hydrlyic conversion? and do you have any tilt floor shift colums for a 80 gmc?
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
I would want $470 for a complete set up(pedals, slave cylinder, clutch master cylinder and bell housing, reservoir and lines. I do have a rebuilt tilt column for the 79-83 floor shift trucks but it is expensive at $350FIRM as I have a lot of work into it and they are relatively hard to come by. It has been completely disassembled and includes the key. It is ready to go.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
how much would shipping to 28214 be? to a business if that makes a difference
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
On the hydraulic assembly or the column? They would need to be shipped separately if you wanted both as the length of the column doesn't mesh with the size of the other items. I will send you a PM with my email address.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
im interested in the conversion and the column depending on shipping
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
It is going to be $20 shipping on the column and $27 on the rest of the stuff. If for some reason it is less I will refund the difference.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Quote:
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Do you still have the hydroboost pedal set?
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Quote:
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
ttt
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Can a vacuum booster be used on the hydro-boost setup? I need a hydraulic clutch pedal set, but don't really want to run hydro-boost
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Quote:
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
How are they different? I have a set of pedals for a manual trans swap and might not have the right ones.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Quote:
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
PM sent.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Do you have any hydraulic pedal assemblies for a hydro boost? I'm looking for a set for my 76. Thanks Ryan.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Quote:
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
Quote:
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
I came up with a perfect one today. There are some out there that are listed for less than mine but most if not all have a lot of wear to the clutch pedal wear the rod attaches for the clutch master cylinder. This causes the slave cylinder to not push the shift for as far making it harder to get into gear.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
How much shipped to 50169?
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
I will send you a PM
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
I had 2 different people contact me on these. They are priced less than what these sell for on Ebay and in way better condition than them as well. The sellers fail to mention that it is worn where the clutch master cylinder attaches to the clutch pedal. Mine do NOT have that defect/problem. They are ready to install and will work properly. Even if you do not buy one from me be sure to check with the sellers about the condition of them.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
I'm going to have to pass for right now. I had a couple other items I spent my truck allowance on that I wasn't expecting.
|
Re: Hydraulic pedal assemblies 1 with hydroboost, one with vacuum
I'm looking for hydraulic clutch/ pedal assembly for vac assist brakes. Anymore available? If so price and shipping to 21122. Yeah I'm on the wrong coast.
|
All times are GMT -4. The time now is 05:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com