1972 suburban parts and cuts
 

I've never posted to sell parts and did not plan to but this suburban fell into my possession and I have no use for it but could not pass it up. I will cut up what someone wants and have some various pieces but not too much. Have never shipped before but willing to learn a new trick so if you see something you need holler and I will shoot numbers and will ship with your assistance. po cut off roof and wacked the pillars.and firewall.

Re: 1972 suburban parts and cuts
 

Price on the rh B pillar? Picked up

Re: 1972 suburban parts and cuts
 

How about $40

Re: 1972 suburban parts and cuts
 

Is there a window left in the fake door? Is it a green tinted one?

Re: 1972 suburban parts and cuts
 

I will take it.
Traveling down your way next week probably.

Re: 1972 suburban parts and cuts
 

How rusty is the cab mounts that connect to the b pillars?

Re: 1972 suburban parts and cuts
 

I need the “B” pillar cut at the roof rail and down through the front and rear rockers, if you can save the floor support for Trevor thats fine. I think it connects behind the pillar.

Re: 1972 suburban parts and cuts
 

Pm sent

Re: 1972 suburban parts and cuts
 

Yes

Re: 1972 suburban parts and cuts
 

What's the condition of the rear sill? (Panel that the tailgate bolts to.)

Can I get some close ups of the circled areas? Need the upper edges to finish off my crew cab 4 th door side. Need at least 24”
Posted via Mobile Device

Re: 1972 suburban parts and cuts
 

I'll look closer for you

Re: 1972 suburban parts and cuts
 

Also interested in the false door window regulaor
Posted via Mobile Device

Re: 1972 suburban parts and cuts
 

I snapped these.real.quick

Re: 1972 suburban parts and cuts
 

I need the entire B pillar as marked.

Re: 1972 suburban parts and cuts
 

I will look at it,could not get that window to roll either way but it may just need a little spray and motion,it's on my list sir

I need infront of that false side basically where the door seal glued to put to the drip edge. Cut flush off with the solid fake side.. and as much of what’s left after removing the b pillar for randy.. price?
Posted via Mobile Device

Sorry to be confusing but it’s hard to explain.. no rush on my part. Thank you..
Posted via Mobile Device

Re: 1972 suburban parts and cuts
 

Randy,
Here are some pictures of that piece ,take a gander and if you want it it's yours

Re: 1972 suburban parts and cuts
 

Its useable for my purpose, cut the rear rocker panel like the front one and then the floor. Which is through that floor support, unless you want to dissect the bottom So Trevor can get the floor support (best idea)
Just cut the top at each side of the top rail so clayton can get his top rail piece.

Re: 1972 suburban parts and cuts
 

The 6. Bolts loosen up things on the floor support but its also spot welded, prob can separate it with an air chisel.

Re: 1972 suburban parts and cuts
 

It has some scale but hasn't gone through anywhere,it has a dent on the edge but bad, would use it if I needed one.

Re: 1972 suburban parts and cuts
 

I actually understood that and it's in my skill range,your name is on it

Re: 1972 suburban parts and cuts
 

Here are some more,let me know if you need some more sir.

Re: 1972 suburban parts and cuts
 

And more