Soon i can play with the big boys
Well...... I took the first step to the 3/4 ton running gear. I'm planning on putting the new 40" good years on my rig, but i figured i better toughin up the drivetrain first. I now own a 14 bolt corporate and another dana 44 but with a 8 lug.
Or as my wife explained to her friend as I was rolling them into the garage "4 tires and a couple of sticks" http://home.comcast.net/~m0mmy_0f_ang3ls/pics/342.jpg http://home.comcast.net/~m0mmy_0f_ang3ls/pics/341.jpg |
Re: Soon i can play with the big boys
What gears are they? Looks like there isn't a pinion shaft in the 14FF. I plan on the same, Already have everything except 8 lug outers for the 44. Am planning on running either 35s or 36s I have laying around. I hope the 44 holds up. Post pics of the swap! Can't wait to see.
|
Re: Soon i can play with the big boys
I can't believe you got those unloaded by yourself. And where's the props, dude?
|
Re: Soon i can play with the big boys
Quote:
My 1/2 ton setup is running 4:56 gears and I'm doing 3200 RPM's at 60 mph, this new setup has 4:10 gears and i think it will improve my gas mileage from the 6 1/2 MPG i get now clear up to a hefty 7MPG. The pinion is there it just isn't attached. The only thing i dont like about it is the wheels are 16.5, so I'll prolly have to buy new wheels but i can can use these until i get thing rolling. I'll prolly take all winter making these look pretty, moving spring mounts, making new shock brackets, etc.... but some day i can be kewl and say "I have the 3/4 ton running gear. |
Re: Soon i can play with the big boys
Welcome to the 3/4 ton Blazer club. We are a rare breed. It would be a mistake not to run 4.56 gears though with 40 inch tires. I would definatly not run 4.10 unless you were 36 inch or smaller. Your milage may even suffer from having to work harder to get it up to speed.
|
Re: Soon i can play with the big boys
Quote:
Since i already have the 4:10 gears I'll prolly set it up and see how it works, but you is prolly right, I'll be switching soon after. |
Re: Soon i can play with the big boys
Look on Ebay - you can find used gears all the time - you shouldn't have a hard time finding a set of gears
|
Re: Soon i can play with the big boys
I have 4.56s in my D60/14FF combo on my truggy with 40" TSLs and it works good and sometimes I wish for 5.13s... but that when the doubler kicks in:hm:
|
Re: Soon i can play with the big boys
Quote:
please post pics of this rig :wave: |
Re: Soon i can play with the big boys
Once upon a time:
http://i36.photobucket.com/albums/e2...ks/Crawl01.jpg Currently: http://i36.photobucket.com/albums/e2...ggy8-18-06.jpg |
Re: Soon i can play with the big boys
nice!
|
Re: Soon i can play with the big boys
:agree: The 3/4 ton gear swap is on my list.
|
Re: Soon i can play with the big boys
thats a great upgrade.....im planning on using a 9.5 ring gear sf 14 bolt and keep my truck 6 lug. I just dont feel the need to lug around the extra weight of a ff 14 bolt but if your ever planning on doing much offroad it gives you the confidence that your most likely not going to have any rear end problems.unless your running mega power and Big tires. A disk brake swap is simple and pretty cheap.
|
Re: Soon i can play with the big boys
If you don't drive interstate alot a 4.88 would be perfect. 4.56 if you do hit the interstate.
|
Re: Soon i can play with the big boys
:cong:
|
Re: Soon i can play with the big boys
You'll love the new beef for sure. :metal:
What are you planning on for suspension? Going longer springs? :gi: |
Re: Soon i can play with the big boys
I had 4:10's in my '69 with 35's and it was perfect. I was getting in the 6-8 range with that rig. I think your going to see you MPG drop with the 4:10's and the bigger tires. My '72 with the stock tires, engine and 3:07 gears is getting 12-13mpg.
|
Re: Soon i can play with the big boys
Well it's official Jim - the Board has spoken - you must go 4.88s or 5.13s! My vote is 4.88 - it's your toy anyway
You can get 5.38s for a 14 bolt now too - but the supplier (Randy's Ring & Pinion) is getting roasted on Pirate4x4.com right now for machining grooves in the pinion bearing support shaft in the 5.38 gear set - the "Pirate" jury is still out on whether this is okay or not. |
Re: Soon i can play with the big boys
Quote:
|
Re: Soon i can play with the big boys
I took the first step to get me motivated. I sold the wheels and tires. I think it shows alot of class. Not just anybody would let there blazer be seen like this.
http://memimage.cardomain.net/member...63_20_full.jpg |
Re: Soon i can play with the big boys
ROFL.
You're going to need a bigger jack! Brian |
Re: Soon i can play with the big boys
What's up pimpin?
|
Re: Soon i can play with the big boys
Reminds me of Bouncytruck!! :nut: :Own:
|
Re: Soon i can play with the big boys
Man that was low! :hm: :hm:
|
Re: Soon i can play with the big boys
So whats with the picture of the 4 small tires? Congrats on the upgrade, are you converting to disc in the rear?
|
All times are GMT -4. The time now is 10:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com