Can't get radio to work...
I am trying to install this aftermarket radio but i am getting no power in the harness. The original radio also didn't work. Anyone have a wiring diagram of the radio circuit for a gmc 1992 c1500?
|
Re: Can't get radio to work...
I got one in my hayes manual i think if I can scan it and post a pic but I'd check fuses, maybe ones blown, and if not you need a test light to check for constant and switched power and then a ground, if nothing else run your own. You can run them out to the firewall and use the junction block under the plastic relay cover for a constant hot and a ground there for ground, or go straight to the battery, then all you need is a switched hot. You could find it in the fuse box or tap into something in the dash maybe.
turned out kinda small but maybe it'll work for ya... http://img.photobucket.com/albums/v3...adiowiring.jpg |
Re: Can't get radio to work...
Thanks for that. The courtesy fuse was blown... radio now works..on to the next problem...
|
Re: Can't get radio to work...
been there done that, mine was the exact same way, kept blowing the fuse and junk.
|
All times are GMT -4. The time now is 01:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com