4L60e help !!!!
I have a trans I got on trade and looks to have been rebuilt recently. The tag on top was painted over. The only codes I have are the one engraved on the pan rail next to the tail shaft housing.
The numbers are: 0CAD055E 27086769 My question is: Will it work behind a 2000 LM7 LS 5.3 Vortec engine with a stock reprogrammed PCM. Posted via Mobile Device |
Re: 4L60e help !!!!
0CAD is probably from a 2000 pickup. Should work
|
Re: 4L60e help !!!!
Thanks. After I posted the question I found online it is a 2000 model, but the CA means it was behind a 4.3 V6 engine. Given that, I am not sure it will work with a LS and a stock reflashed PCM.
|
Re: 4L60e help !!!!
Remove the torque converter & take a pic of the input shaft.....
|
Re: 4L60e help !!!!
The v6 trannies came with a smaller input shaft and less clutches. It will need to be upgraded
Posted via Mobile Device |
Re: 4L60e help !!!!
4.3L & V8 4L60E's all have the same number of clutches. "245mm" 4L60E's did use fewer clutches. (i.e. 2.2L, 2.5L, 3.4L & 3.8L used in S-10 & 4th gen F-bodies)
'93-'02 4.3L, 5.0L, & 5.7L use a "295mm" 4L60E. 98-present Gen III engines use a "300mm" 4L60E. '03 & up 4.3L's use a 295mm/300mm hybrid of sorts & have not really checked them out....But they are different. |
All times are GMT -4. The time now is 01:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com