|
67 c10 first build
5 Attachment(s)
|
Re: 67 c10 first build
5 Attachment(s)
|
Re: 67 c10 first build
5 Attachment(s)
|
Re: 67 c10 first build
2 Attachment(s)
Attachment 1348642
Attachment 1348643 the story for this build. my grandpa is a long time hot rod builder and has a lot of knowledge. i love to go help him on his projects. but i wanted to build one of my own. so i picked up the 67 and the guy had tried to put it on an oldsmobile frame but i didnt like that idea. so i started looking for a frame. found a 71 long wheel base frame and went a picked it up with the plans on cutting it down to a swb. then i found a 69 short wheel base frame so i went and go it and ended up swapint the 5 lug from the 71 to the swb frame. i wanted to lower the truck and bag it but this is somthing that my grandpa doesnt know andything about and im still learning mostly from this forum. so i started looking how to get it low for little cost i came across drew715s build where he z'ed the frame and my prandpa builds z'ed frames all the time for his hotrods. so i did all the reserch and this is what i came up with. 3 in in the front and 5.5 in in the back. this is as far as i am at this point. i owe alot of thanks to people of this forum yall can do some amazing stuff and am gald that yall are willing to share it because i would not be able to do some of this stuff without the info on this forum. thanks Matt |
Re: 67 c10 first build
Its been a long time since i have seen that approach for lowering, it may have been on a TV show some time back, anyway you sparked my interest so i'm subscribed.
|
Re: 67 c10 first build
Never seen anyone lower their truck this way, but I guess it will work. I have to keep my eye on this build. George
|
Re: 67 c10 first build
I'm defiantly in on this
|
Re: 67 c10 first build
3 Attachment(s)
Attachment 1349486
Attachment 1349487 Attachment 1349488 waiting on ubolts for the trailing arms so i started with the floor and rockers on the cab i got the new floor welded in last night just forgot to take a pic. |
Re: 67 c10 first build
looks good so far George
|
Re: 67 c10 first build
What did you do to get the core support to line up with the cab/fenders? Following for an interesting build!
|
Re: 67 c10 first build
Quote:
|
Re: 67 c10 first build
Yep that's correct dropped the core 3 in same as front cab mounts
|
Re: 67 c10 first build
Maybe I'm a bit confused, but you said you're not using bags, so what are you going to use for suspension? Is it just basically a body drop w/out suspension drop?
|
Re: 67 c10 first build
Quote:
Quote:
|
Re: 67 c10 first build
I'm using bags just got them in
|
Re: 67 c10 first build
4 Attachment(s)
Attachment 1352049
Attachment 1352050 Attachment 1352051 Attachment 1352052 got the innner and outer rocker cab corner on the passanger side complete. and most of the driver side complete couple of afternoons this week and it should be done. ready to go get my bed and get it cut down. after doing some looking on the forum i found that to make a long bed a short be u need cut 12 in out from the front of the wheel wel and 8 in out of the back. is this correct. thanks matt |
Re: 67 c10 first build
how was the fit on the rockers?
|
Re: 67 c10 first build
the driver side went well the passanger side needed some help
|
Re: 67 c10 first build
5 Attachment(s)
its been a while but i have been busy on the truck and at work. Attachment 1374844
Attachment 1374845 Attachment 1374846 Attachment 1374847 Attachment 1374848 cut my long bed down to a short bed. |
Re: 67 c10 first build
4 Attachment(s)
Attachment 1374849
Attachment 1374850 Attachment 1374851 Attachment 1374852 got my air bags and C notch installed and operating of the house compressor |
Re: 67 c10 first build
3 Attachment(s)
Attachment 1374853
Attachment 1374854 Attachment 1374855 put the truck back together to see what it looks like. loks pretty good but going to need drop spindles. |
Re: 67 c10 first build
3 Attachment(s)
Attachment 1376558
Attachment 1376559 Attachment 1376560 done some shaving on the fire wall and bed today. |
Re: 67 c10 first build
1 Attachment(s)
|
Re: 67 c10 first build
3 Attachment(s)
Attachment 1397896
Attachment 1397897 Attachment 1397898 got some mor work done also had a spare step bed laying around so i mad the bench for my grandpa |
Re: 67 c10 first build
Coming along nicely. Love the bench too. I am sure your Grandpa will as well.
I will be following along for the ride. |
| All times are GMT -4. The time now is 02:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com