![]() |
Reverse Polarity on rear bulbs
Something strange is going on when I went to replace a burnt out bulb in the rear. The signals stopped working and when I put the bulb in the wrong way the signal will work but when I seat it correctly it doesn't work.
I will be checking grounds in a few minutes but wondering if anyone else have insight into this. Everything worked fine before the I tightening some bed bolts...Hoping it's an easy find/fix. Thanks |
Re: Reverse Polarity on rear bulbs
So after more inspecting around the front signals no longer work. I'll be searching this site for some guidance.
|
Re: Reverse Polarity on rear bulbs
Flasher unit isn't making any noise so I will start there....I have replaced this about a year ago but we'll see if this fixes the issue.
|
Re: Reverse Polarity on rear bulbs
Problem solved...turned out it was the flasher unit. I swapped out the hazard flasher and everything works. The one socket is kinda loose but after some shaking around it's working.
I'm looking to use the old lights for a few months than switch to LEDs |
All times are GMT -4. The time now is 06:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com