Lift shackles for lowering kit
 

Hey GUys
My 97 is lowered 6in in th rear want to raise it about a inch do they make lift shackles that will fit these trucks or is their another way to do it?

Thanks

Re: Lift shackles for lowering kit
 

I used AC delco air shocks with shock extenders ...OEM size shocks. worked perfect.

Re: Lift shackles for lowering kit
 

they make shackles, but typically they are longer and would lower more.

going shorter would drastically change how the spring flexes and cause a bucking more that likely.

you could consider a rear shackle flip ??? depending on your fab skills and which holes you use...

dig through some 4wd threads, or service sites for rear shackle mounts...some make a boxed version that are smaller overall than a stock and could easily be placed where needed.

Re: Lift shackles for lowering kit
 

I suggest having your springs rearched for the needed lift. If my memory is right lift shackles are shorter then lowering or factory shackles. This can cause the ride to become a bit jittery due to the springs inability to grow length wide during compression.

Re: Lift shackles for lowering kit
 

http://www.ruffstuffspecialties.com/catalog/UNFLIP.html

here is a good start...

Re: Lift shackles for lowering kit
 

Air shocks....

Re: Lift shackles for lowering kit
 

^^^^
and when they leak ????

Re: Lift shackles for lowering kit
 

You fix them.. just like to fix any other line that may leak on a truck.

Re: Lift shackles for lowering kit
 

When I lowered my 99’ crew cab 4/6 it was a bit too low in the rear. I ordered some 1’ lift shackles off of eBay. They worked just fine.