The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kwmech** · 12-27-2015, 02:08 AM

Since you moved the engine forward already, even with the fixed yoke you will have notch the member....just not nearly as much. Your drive shaft will probably need to be at least a 2.75'' tube minimum, being a 1 piece

12-27-2015, 02:08 AM	#15
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,565	Re: Opinions or ideas needed Since you moved the engine forward already, even with the fixed yoke you will have notch the member....just not nearly as much. Your drive shaft will probably need to be at least a 2.75'' tube minimum, being a 1 piece