CA 72 Blazer part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 03-11-2014, 04:55 PM

Pretty bare 72 4x4 K5 Blazer tub..no frame. Has excellent windshield frame, uncut a/c dash, very clean floor, nice firewall, driver side taillight area is clean, passenger side has some push down below, nice high hump, bed sides are pretty good (driver side has had a custom gas door mod done)..both sides have small areas of filler..previous owner called it prepping ofr paint..lol. Anyway, take a look any questions, please post here in the thread. Thank you!

Adam

Windshield Frame $400 plus shipping (can cut to your need)
Hi Hump $45 + shipping

doo142 · 03-11-2014, 05:53 PM

Interested in wheel wells let me know price, thanks

budnikguy · 03-11-2014, 09:48 PM

$80 plus the ride...

Quote:

Originally Posted by doo142

Interested in wheel wells let me know price, thanks

budnikguy · 04-23-2014, 05:48 PM

pics of wheel wells removed, have been posted, lmk. Thanks Adam

Quote:

Originally Posted by doo142

Interested in wheel wells let me know price, thanks

asolde · 03-11-2014, 05:56 PM

I like to buy that booster bracket from you. Circled in red.

budnikguy · 03-11-2014, 09:54 PM

$22 plus the ride....

Quote:

Originally Posted by asolde

I like to buy that booster bracket from you. Circled in red.

JimH2828 · 03-11-2014, 06:42 PM

Interested in the below items if the price is right, shipped to GA 30005

1) Rear side panel mount brackets
- center top hat type
- floor and tailgate L type - I think they are spot welded
2) firewall to rear wire harness
- any cuts or breaks?
3) Rear bench rear hold down bracket and bolt

Thanks
Jim

**IronCanine** · 03-11-2014, 07:27 PM

Interested in the last 4 or 5 inches of the bed/deck leading up to the tailgate.

Thanks, Brad

budnikguy · 04-23-2014, 05:59 PM

I have posted more pics of the floor, I would need $80 shipped for your cut.lmk

Thanks
Adam

Quote:

Originally Posted by IronCanine

Interested in the last 4 or 5 inches of the bed/deck leading up to the tailgate.

Thanks, Brad

**IronCanine** · 04-30-2014, 07:02 AM

Quote:

Originally Posted by budnikguy

I have posted more pics of the floor, I would need $80 shipped for your cut.lmk

Thanks
Adam

Sorry I missed this. Definitely still in. PM payment info. Thanks.

Brad

Sandemonium · 03-11-2014, 07:36 PM

Quote:

Originally Posted by JimH2828

Interested in the below items if the price is right, shipped to GA 30005

1) Rear side panel mount brackets
- center top hat type
- floor and tailgate L type - I think they are spot welded

Thanks
Jim

If Jim passes on the rear side panel pieces I will take them

Bob

JJH Jimmy · 03-11-2014, 07:40 PM

I see that you have several 67-72's. Would you happen to have a passenger side sport mirror?

Thanks.

budnikguy · 03-12-2014, 03:51 PM

I do, $40 shipped....

Quote:

Originally Posted by JJH Jimmy

I see that you have several 67-72's. Would you happen to have a passenger side sport mirror?

Thanks.

JJH Jimmy · 03-12-2014, 09:01 PM

Quote:

Originally Posted by budnikguy

I do, $40 shipped....

I will take it. PM me payment details and I will send payment in the morning.

Thanks.

budnikguy · 03-11-2014, 10:53 PM

second inline...noted

Quote:

Originally Posted by Sandemonium

If Jim passes on the rear side panel pieces I will take them

Bob

budnikguy · 03-11-2014, 10:21 PM

Please clarify these before I can price...
1) Rear side panel mount brackets
- center top hat type
- floor and tailgate L type - I think they are spot welded

I will confirm condition and let you know

2) firewall to rear wire harness
- any cuts or breaks?

$15.00 shipped if going with other items

3) Rear bench rear hold down bracket and bolt

Quote:

Originally Posted by JimH2828

Interested in the below items if the price is right, shipped to GA 30005

1) Rear side panel mount brackets
- center top hat type
- floor and tailgate L type - I think they are spot welded
2) firewall to rear wire harness
- any cuts or breaks?
3) Rear bench rear hold down bracket and bolt

Thanks
Jim

budnikguy · 04-23-2014, 05:57 PM

These are all removed, I will add a picture or 2 tomorrow for you!

Thanks
Adam

Quote:

Originally Posted by JimH2828

Interested in the below items if the price is right, shipped to GA 30005

1) Rear side panel mount brackets
- center top hat type
- floor and tailgate L type - I think they are spot welded
2) firewall to rear wire harness
- any cuts or breaks?
3) Rear bench rear hold down bracket and bolt

Thanks
Jim

tdkosta · 03-11-2014, 07:40 PM

Interested in this section. Thanks - Tony

budnikguy · 03-12-2014, 03:56 PM

Let me get it disassembled a bit and i would be happy to cut this section for you.Do you need it to wrap around and include the taillight section?

Quote:

Originally Posted by tdkosta

Interested in this section. Thanks - Tony

tdkosta · 03-12-2014, 05:48 PM

Quote:

Originally Posted by budnikguy

Let me get it disassembled a bit and i would be happy to cut this section for you.Do you need it to wrap around and include the taillight section?

No I don't need it to wrap around and include the taillight, just up to the edge is fine.

tdkosta · 05-04-2014, 10:39 PM

Quote:

Originally Posted by tdkosta

No I don't need it to wrap around and include the taillight, just up to the edge is fine.

Still in for when you are ready to cut. Thanks

tjsblazer · 03-11-2014, 08:20 PM

Interested in both front floor sections if they are solid.. Does the passenger have some extra holes drilled in it?

**IronCanine** · 03-11-2014, 08:36 PM

On second thought, if shipping is doable, I really need to get the back half of the rear deck. So I'll revise my request to: interested in the deck mid wheel well to tailgate shipped to 30622 vs. just the last 5 inches leading to the tailgate.

Thanks,

Brad

budnikguy · 03-11-2014, 10:56 PM

If Greyhound is an option for you...$100 for the cut and what ever Greyhound would be...

Adam

Quote:

Originally Posted by IronCanine

On second thought, if shipping is doable, I really need to get the back half of the rear deck. So I'll revise my request to: interested in the deck mid wheel well to tailgate shipped to 30622 vs. just the last 5 inches leading to the tailgate.

Thanks,

Brad

**IronCanine** · 03-11-2014, 11:07 PM

Quote:

Originally Posted by budnikguy

If Greyhound is an option for you...$100 for the cut and what ever Greyhound would be...

Adam

That'll work for me assuming GH is not outrageous. You can PM info. Thanks. Brad

03-11-2014, 04:55 PM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	72 Blazer part out Pretty bare 72 4x4 K5 Blazer tub..no frame. Has excellent windshield frame, uncut a/c dash, very clean floor, nice firewall, driver side taillight area is clean, passenger side has some push down below, nice high hump, bed sides are pretty good (driver side has had a custom gas door mod done)..both sides have small areas of filler..previous owner called it prepping ofr paint..lol. Anyway, take a look any questions, please post here in the thread. Thank you! Adam Windshield Frame $400 plus shipping (can cut to your need) Hi Hump $45 + shipping

03-11-2014, 05:53 PM	#2
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,115	Re: 72 Blazer part out Interested in wheel wells let me know price, thanks

03-11-2014, 05:56 PM	#5
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: 72 Blazer part out I like to buy that booster bracket from you. Circled in red. Attached Images __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

03-11-2014, 06:42 PM	#7
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: 72 Blazer part out Interested in the below items if the price is right, shipped to GA 30005 1) Rear side panel mount brackets - center top hat type - floor and tailgate L type - I think they are spot welded 2) firewall to rear wire harness - any cuts or breaks? 3) Rear bench rear hold down bracket and bolt Thanks Jim

03-11-2014, 07:27 PM	#8
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,542	Re: 72 Blazer part out Interested in the last 4 or 5 inches of the bed/deck leading up to the tailgate. Thanks, Brad

03-11-2014, 07:40 PM	#12
JJH Jimmy Registered User Join Date: Jun 2012 Location: Schoolcraft, Michigan Posts: 927	Re: 72 Blazer part out I see that you have several 67-72's. Would you happen to have a passenger side sport mirror? Thanks. __________________ 1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565

03-11-2014, 07:40 PM	#18
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: 72 Blazer part out Interested in this section. Thanks - Tony Attached Images

03-11-2014, 08:20 PM	#22
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 72 Blazer part out Interested in both front floor sections if they are solid.. Does the passenger have some extra holes drilled in it? __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

03-11-2014, 08:36 PM	#23
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,542	Re: 72 Blazer part out On second thought, if shipping is doable, I really need to get the back half of the rear deck. So I'll revise my request to: interested in the deck mid wheel well to tailgate shipped to 30622 vs. just the last 5 inches leading to the tailgate. Thanks, Brad Attached Images Last edited by IronCanine; 03-11-2014 at 08:45 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.