CA Lots of assorted left over parts for sale in SoCal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67C10BUB · 01-02-2011, 07:34 PM

I have several parts that are left over from my build. Let me know if you would like more/better pictures of anything.

1. Brake booster/master cyl/prop valve assy. This worked perfectly when removed about a week ago. The only thing I know is wrong is the fire wall seal is worn. I am asking $75 plus actual shipping. SOLD

2. Factory 1967 bench seat covered in a brand new red/black hounds-tooth cover. The cover is in perfect condition, but the foam underneath is original, so it is kinda' soft. I haven't had the cover off, so I don't know what the frame is like, but it is sturdy and usable. I am asking $200 plus actual shipping, although I would prefer pick-up, since it is so big.

3. Factory AC control unit. All levers work / switch worked when removed. The cables are still attached and seem decent. I am asking $75 plus actual shipping. SOLD

4. Factory stereo. I have no idea if it works and I have no interest in testing it. I am asking $25 plus shipping. SOLD

5. Full set of mechanical Equus gauges. The speedo and tach are 3 3/8" and the water temp, fuel level, oil pressure, and volts are all 2 1/16". They all functioned perfectly and includes the senders. There are no scratches or defects. The only issue is that the tach retaining ring is missing. These are sold at any Kragen/O'reilly, so if you have an issue then just buy a replacement there and put the part that is giving you problems in the package and return it. I am asking $200 plus shipping.

All prices are negotiable, so make an offer.

67C10BUB · 01-02-2011, 07:53 PM

I also have a bunch of factory AC/heater parts and a factory radiator fan shroud. Let me know what you are looking for and I can take pics.

Flatbed136 · 01-02-2011, 08:33 PM

That booster setup work on a 68 3/4 ton 2wd c20??

67C10BUB · 01-02-2011, 09:06 PM

Quote:

Originally Posted by Flatbed136

That booster setup work on a 68 3/4 ton 2wd c20??

I honestly have no idea what trucks it will work on. It came off of a 67 1/2 ton. It is a 5 bolt pattern (4 in an evenly spaced rectangle arrangement and 1 more below the lower RH corner bolt (raised a bit to slide the steering column retainer). I could get pics of the bolt pattern and measure anything you need.

67chevy1series · 01-02-2011, 09:28 PM

my dad has a 70 and wants to get an original radio to stick in the hole on the dash as he says ,and then wants to get a cheapo one from wal mart to stick under the seat and he found one with bad chrome for .99 beleive it or not but it is too far to ship ,he will never use this radio but he will just install it so what is the lowest on the radio that you can go?

67C10BUB · 01-02-2011, 10:14 PM

Quote:

Originally Posted by 67chevy1series

my dad has a 70 and wants to get an original radio to stick in the hole on the dash as he says ,and then wants to get a cheapo one from wal mart to stick under the seat and he found one with bad chrome for .99 beleive it or not but it is too far to ship ,he will never use this radio but he will just install it so what is the lowest on the radio that you can go?

The chrome is good on this one. I would like to get at least $15 + shipping, just to make it worth my time to package it up and get it shipped.

novafrog · 01-02-2011, 11:42 PM

Quote:

Originally Posted by 67C10BUB

I also have a bunch of factory AC/heater parts and a factory radiator fan shroud. Let me know what you are looking for and I can take pics.

is this fan shroud for a/c,how big is the hole for the fan,i have a serpentine belt set up,hole needs to be 20in. or bigger,thanks

67C10BUB · 01-03-2011, 12:19 PM

Quote:

Originally Posted by novafrog

is this fan shroud for a/c,how big is the hole for the fan,i have a serpentine belt set up,hole needs to be 20in. or bigger,thanks

The shroud has a 21" hole. It is in near perfect condition (no cracks or holes) and is the original type material (plastic/fiberglass looking stuff). I would like to get $50 plus shipping.

Flatbed136 · 01-02-2011, 09:33 PM

Maybe someone will chime in but if not thats ok.

This is new to me so I'm not sure either.

I got 4 bolts spaced approx. 4" apart but I'm not sure about the other one you mention.

Just wondering if they are different setups for 1/2 & 3/4.

67C10BUB · 01-02-2011, 10:11 PM

Quote:

Originally Posted by Flatbed136

Maybe someone will chime in but if not thats ok.

This is new to me so I'm not sure either.

I got 4 bolts spaced approx. 4" apart but I'm not sure about the other one you mention.

Just wondering if they are different setups for 1/2 & 3/4.

Mine are @3.25" on center from side-to-side and @2.5" on center from top to bottom. If the measurements match your firewall bolts then I would think it would work. The 5th hole doesn't have to be used.

GobbleStalker · 01-03-2011, 12:05 AM

If you have the knobs for the radio I will take it.

Kevin

67C10BUB · 01-03-2011, 12:20 PM

Quote:

Originally Posted by GobbleStalker

If you have the knobs for the radio I will take it.

Kevin

I can't seem to find the knobs right now, but I will keep an eye out in my pile of junk and post if I come across them.

67C10BUB · 01-06-2011, 07:03 AM

ttt. Nobody needs any of these parts. They seem like very reasonable prices to me. I also have a blazer gas tank SOLD, OEM trans X-member, stock height coil springs (front and back), OEM pan-hard bar, and front disc brake setup (spindles, calipers, rotors, etc).

bean · 01-06-2011, 10:52 AM

What would the shipping be on the mc to fort worth, tx 76112? and do you still have the radio?

67C10BUB · 01-06-2011, 05:48 PM

Quote:

Originally Posted by bean

What would the shipping be on the mc to fort worth, tx 76112? and do you still have the radio?

It looks like it would be about $25 and yes, I still have the radio.

CORSAIR · 01-06-2011, 11:41 PM

I will take the fan shrould for $40 and I will pick it up? please PM if you are a go with pick up info.

Thanks,
CORSAIR

CORSAIR · 01-06-2011, 11:43 PM

Tell me about the Blazer tank may be interested in it along with shroud?

ka_jd7and1 · 01-07-2011, 12:05 AM

Can I get more info on the front disc brake setup?

Thanks.

67C10BUB · 01-07-2011, 06:53 AM

Quote:

Originally Posted by ka_jd7and1

Can I get more info on the front disc brake setup?

Thanks.

It was the setup that the PO put on. It seems to be an upgraded '73-'87 setup (judging by the ball-joint sizes). It has the single piston calipers and the 1 1/4" thick rotors. They are on stock height spindles and the rotors/pads look like new )except for the surface rust and they are missing the dust caps. The bearings seem good still. I would like to get $100 for the whole setup. I could take pics tomorrow if you like.

67C10BUB · 01-07-2011, 02:40 PM

Here are some pics of the brakes, gas tank, and trans X-member.

67C10BUB · 01-07-2011, 02:41 PM

The other caliper is there. I just took it off the spindle.

tubbedII · 01-07-2011, 03:02 PM

How much for the mc assembly shipped to 95822 (Sac, CA)? I take it the prop valve is for a disc/drum set up?

67C10BUB · 01-07-2011, 05:02 PM

Quote:

Originally Posted by tubbedII

How much for the mc assembly shipped to 95822 (Sac, CA)? I take it the prop valve is for a disc/drum set up?

It was hooked up to a disc/drum system on my truck and it worked fine, but I don't know for sure if that's what it was designed for since it was on the truck when I bought it. I'll take $75 shipped to you if you are interested.

tubbedII · 01-07-2011, 05:45 PM

Quote:

Originally Posted by 67C10BUB

It was hooked up to a disc/drum system on my truck and it worked fine, but I don't know for sure if that's what it was designed for since it was on the truck when I bought it. I'll take $75 shipped to you if you are interested.

I'll take it (given I'm properly next in line)...pm me the payment info!

CORSAIR · 01-10-2011, 06:59 PM

67C10BUB,
Thanks for the delivery of the shroud & tank I look forward to seeing them this weekend. My buddy told me they look good.

CORSAIR

01-02-2011, 07:34 PM	#1
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Lots of assorted left over parts for sale in SoCal I have several parts that are left over from my build. Let me know if you would like more/better pictures of anything. 1. Brake booster/master cyl/prop valve assy. This worked perfectly when removed about a week ago. The only thing I know is wrong is the fire wall seal is worn. I am asking $75 plus actual shipping. SOLD 2. Factory 1967 bench seat covered in a brand new red/black hounds-tooth cover. The cover is in perfect condition, but the foam underneath is original, so it is kinda' soft. I haven't had the cover off, so I don't know what the frame is like, but it is sturdy and usable. I am asking $200 plus actual shipping, although I would prefer pick-up, since it is so big. 3. Factory AC control unit. All levers work / switch worked when removed. The cables are still attached and seem decent. I am asking $75 plus actual shipping. SOLD 4. Factory stereo. I have no idea if it works and I have no interest in testing it. I am asking $25 plus shipping. SOLD 5. Full set of mechanical Equus gauges. The speedo and tach are 3 3/8" and the water temp, fuel level, oil pressure, and volts are all 2 1/16". They all functioned perfectly and includes the senders. There are no scratches or defects. The only issue is that the tach retaining ring is missing. These are sold at any Kragen/O'reilly, so if you have an issue then just buy a replacement there and put the part that is giving you problems in the package and return it. I am asking $200 plus shipping. All prices are negotiable, so make an offer. Attached Images __________________ 67 5.3L Build Last edited by 67C10BUB; 01-20-2011 at 06:32 AM.

01-02-2011, 07:53 PM	#2
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: Lots of assorted left over parts for sale in SoCal I also have a bunch of factory AC/heater parts and a factory radiator fan shroud. Let me know what you are looking for and I can take pics. __________________ 67 5.3L Build

01-02-2011, 08:33 PM	#3
Flatbed136 Registered User Join Date: Dec 2010 Location: Jesup,Iowa Posts: 45	Re: Lots of assorted left over parts for sale in SoCal That booster setup work on a 68 3/4 ton 2wd c20??

01-02-2011, 09:28 PM	#5
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Lots of assorted left over parts for sale in SoCal my dad has a 70 and wants to get an original radio to stick in the hole on the dash as he says ,and then wants to get a cheapo one from wal mart to stick under the seat and he found one with bad chrome for .99 beleive it or not but it is too far to ship ,he will never use this radio but he will just install it so what is the lowest on the radio that you can go?

01-02-2011, 09:33 PM	#9
Flatbed136 Registered User Join Date: Dec 2010 Location: Jesup,Iowa Posts: 45	Re: Lots of assorted left over parts for sale in SoCal Maybe someone will chime in but if not thats ok. This is new to me so I'm not sure either. I got 4 bolts spaced approx. 4" apart but I'm not sure about the other one you mention. Just wondering if they are different setups for 1/2 & 3/4.

01-03-2011, 12:05 AM	#11
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Lots of assorted left over parts for sale in SoCal If you have the knobs for the radio I will take it. Kevin __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

01-06-2011, 07:03 AM	#13
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: Lots of assorted left over parts for sale in SoCal ttt. Nobody needs any of these parts. They seem like very reasonable prices to me. I also have a blazer gas tank SOLD, OEM trans X-member, stock height coil springs (front and back), OEM pan-hard bar, and front disc brake setup (spindles, calipers, rotors, etc). __________________ 67 5.3L Build Last edited by 67C10BUB; 01-10-2011 at 08:33 PM.

01-06-2011, 10:52 AM	#14
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 915	Re: Lots of assorted left over parts for sale in SoCal What would the shipping be on the mc to fort worth, tx 76112? and do you still have the radio?

01-06-2011, 11:41 PM	#16
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Lots of assorted left over parts for sale in SoCal I will take the fan shrould for $40 and I will pick it up? please PM if you are a go with pick up info. Thanks, CORSAIR __________________ "The Can't Family Lives Across The Street"

01-06-2011, 11:43 PM	#17
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Lots of assorted left over parts for sale in SoCal Tell me about the Blazer tank may be interested in it along with shroud? __________________ "The Can't Family Lives Across The Street"

01-07-2011, 12:05 AM	#18
ka_jd7and1 is a fungineer Join Date: Jan 2009 Location: Bakersfield, CA Posts: 795	Re: Lots of assorted left over parts for sale in SoCal Can I get more info on the front disc brake setup? Thanks. __________________ 2003 S10, 2.2 auto- the daily driver, currently with a 2"/2" drop and some minor engine bolt-ons 1978 Impala 2-door, race 350/T350 - the new race car, in progress 1968 Chevy C10 longbed- 3/5 drop, currently undergoing a heart transplant

01-07-2011, 02:40 PM	#20
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: Lots of assorted left over parts for sale in SoCal Here are some pics of the brakes, gas tank, and trans X-member. Attached Images __________________ 67 5.3L Build

01-07-2011, 02:41 PM	#21
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: Lots of assorted left over parts for sale in SoCal The other caliper is there. I just took it off the spindle. __________________ 67 5.3L Build

01-07-2011, 03:02 PM	#22
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Lots of assorted left over parts for sale in SoCal How much for the mc assembly shipped to 95822 (Sac, CA)? I take it the prop valve is for a disc/drum set up? __________________ 1970 2wd Blazer

01-10-2011, 06:59 PM	#25
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Lots of assorted left over parts for sale in SoCal 67C10BUB, Thanks for the delivery of the shroud & tank I look forward to seeing them this weekend. My buddy told me they look good. CORSAIR __________________ "The Can't Family Lives Across The Street"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.