A few parts F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jose · 12-31-2003, 07:31 PM

4x4 Auto high hump 35.00
Big block high hump no holes 35.00
Burb middle seat 75.00
4x4 Engine cross member 40.00
Set if 5 after market clearance lights 25.00
Heater core housing with fan motor and heater core no cracks on housing 25.00
Burb filler neck 15.00

Pictures upon request .

All parts plus shipping

**FRENCHBLUE72** · 12-31-2003, 10:18 PM

Jose not sure if I told you before or not but pont is looking for a clean high hump..

**breeh** · 12-31-2003, 10:23 PM

If pont isn't interested in the 4x4 high hump, I am. Let me know Jose.

jamis · 12-31-2003, 10:58 PM

Jose what is a "Big block high hump no holes" is the transmission hump? If it is how does that make a diffrence in the installation. I'm going to use a big block and I was wondering if I will need this part.

jose · 12-31-2003, 11:22 PM

I'll let you know if pont takes it or not breeh .

jamis High hump no holes from factory were on 2wd trucks with big block and 400 tranny . Yes that is the tranny hump .

jose · 01-01-2004, 02:09 AM

Picture of clearance lights dealer after market option . Jose

jose · 01-01-2004, 06:03 PM

jamis here is a picture of the high hump . Jose

dinnut · 01-01-2004, 06:17 PM

whats the difference in the big block and the 4x4 humps couldnt they both be used for both?

jose · 01-01-2004, 06:36 PM

The 4x4 humps have the holes for the transfer case shifter and the hole for the 4 speed shifter . The 2wd big blocks with auto did not have any holes . You could use the hump with out holes on a 4x4 but then you would have to cut out the holes for the TC shifter and the 4 speed shifter . The auto 4x4 high hump only has one hole for the TC shifter . Jose

jamis · 01-01-2004, 08:43 PM

Jose here is a picture of my cab, will the cover fit?

jose · 01-01-2004, 08:51 PM

That is a low hump so it did come with an automatic .

jamis · 01-01-2004, 08:59 PM

Yes I knew it was auto I just wasnt shure on the hump. So if you think I have to use it and it will fit. Send me a pm on how you would like payment and a total to zip code 34120

imdarren · 01-01-2004, 09:39 PM

jamis
No. That cover wont fit.
Yours is a diffrent style. Yours is welded in, and the style Jose has is a "bolt in style".

Darren

PrimeredThunder · 01-01-2004, 09:49 PM

Jose- You dont by any chance have a 2wd Non A/C Fan Shroud for a sbc? It would go on my 72'

jose · 01-01-2004, 10:02 PM

PrimeredThunder no i don't have one at the moment . Jose

jamis · 01-01-2004, 10:20 PM

Quote:

Originally posted by imdarren
jamis
No. That cover wont fit.
Yours is a diffrent style. Yours is welded in, and the style Jose has is a "bolt in style".

Darren

I know mine is part of the floor sheet metal, but I'm swapping over to a BB and a TH400 and have some concerns about the fit.
I did a search on the subject and found most peeps say its needed and comes stock on the BB/th400 combos from factory.

sub4rvr · 01-01-2004, 11:22 PM

I'm interested in the No-hole high hump if jamis or pont don't take it. 92262 zip. Thanks, Dave.

jose · 01-02-2004, 12:05 AM

Sorry sub4rvr both high humps are sold .

junkyardjohn · 01-02-2004, 12:13 AM

Quote:

Originally posted by imdarren
jamis
No. That cover wont fit.
Yours is a diffrent style. Yours is welded in, and the style Jose has is a "bolt in style".

Darren

DARRIN ... YES THAT TRANS. HUMP WILL FIT. IT'S PRETTY EASY & STRAIGHTFORWORD INSTALLATION.

JOHN

imdarren · 01-02-2004, 03:51 AM

I stand corrected.
Thanks for the heads up.

Darren

12-31-2003, 07:31 PM	#1
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	A few parts F/S 4x4 Auto high hump 35.00 Big block high hump no holes 35.00 Burb middle seat 75.00 4x4 Engine cross member 40.00 Set if 5 after market clearance lights 25.00 Heater core housing with fan motor and heater core no cracks on housing 25.00 Burb filler neck 15.00 Pictures upon request . All parts plus shipping __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

12-31-2003, 10:18 PM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Jose not sure if I told you before or not but pont is looking for a clean high hump.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 10:23 PM	#3
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	If pont isn't interested in the 4x4 high hump, I am. Let me know Jose. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

12-31-2003, 11:22 PM	#5
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	I'll let you know if pont takes it or not breeh . jamis High hump no holes from factory were on 2wd trucks with big block and 400 tranny . Yes that is the tranny hump . __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

01-01-2004, 02:09 AM	#6
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Picture of clearance lights dealer after market option . Jose Attached Images __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

12-31-2003, 10:58 PM	#4
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	Jose what is a "Big block high hump no holes" is the transmission hump? If it is how does that make a diffrence in the installation. I'm going to use a big block and I was wondering if I will need this part.

01-01-2004, 06:03 PM	#7
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	jamis here is a picture of the high hump . Jose Attached Images __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

01-01-2004, 06:17 PM	#8
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	whats the difference in the big block and the 4x4 humps couldnt they both be used for both? __________________ 70 longbed 496/th400/Ford 9"

01-01-2004, 06:36 PM	#9
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	The 4x4 humps have the holes for the transfer case shifter and the hole for the 4 speed shifter . The 2wd big blocks with auto did not have any holes . You could use the hump with out holes on a 4x4 but then you would have to cut out the holes for the TC shifter and the 4 speed shifter . The auto 4x4 high hump only has one hole for the TC shifter . Jose __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

01-01-2004, 08:43 PM	#10
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	Jose here is a picture of my cab, will the cover fit? Last edited by jamis; 10-05-2007 at 07:11 AM.

01-01-2004, 08:51 PM	#11
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	That is a low hump so it did come with an automatic . __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

01-01-2004, 08:59 PM	#12
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	Yes I knew it was auto I just wasnt shure on the hump. So if you think I have to use it and it will fit. Send me a pm on how you would like payment and a total to zip code 34120

01-01-2004, 09:39 PM	#13
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	jamis No. That cover wont fit. Yours is a diffrent style. Yours is welded in, and the style Jose has is a "bolt in style". Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

01-01-2004, 09:49 PM	#14
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Jose- You dont by any chance have a 2wd Non A/C Fan Shroud for a sbc? It would go on my 72' __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

01-01-2004, 10:02 PM	#15
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	PrimeredThunder no i don't have one at the moment . Jose __________________ 68 GMC 4x4 SWB jose6772@yahoo.com



Register or Log In To remove these advertisements.

01-01-2004, 11:22 PM	#17
sub4rvr Registered User Join Date: May 2000 Location: Palm Springs, Ca. Posts: 574	I'm interested in the No-hole high hump if jamis or pont don't take it. 92262 zip. Thanks, Dave. __________________ 72 C10 Suburban 90 S10 57 F100 (2) 67 Mustang (2) 69 Torino GT 00 Mustang GT Conv.

01-02-2004, 12:05 AM	#18
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Sorry sub4rvr both high humps are sold . __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

01-02-2004, 03:51 AM	#20
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	I stand corrected. Thanks for the heads up. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

Register or Log In To remove these advertisements.