Anybody bought suspension parts from LMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jay6891 · 11-17-2004, 09:44 AM

anybody bought any suspension parts from LMC? Looking at their Front and Rear Suspension Kit. What brand of parts do they use? Part # 34-9065 includes everything for front rebuild including lowering springs. Rear gives you all poly bushings for rear control arms and track bar and lowering springs. All for a price of 600.00. Can't find anybody that comes close to this deal so wondering about quailty of parts. this is for a 68 c-10 with power steering.

jay6891 · 11-22-2004, 05:47 PM

So I take it no one has any thoughts to this product? On to CCP.

greasemonkey · 11-22-2004, 10:29 PM

Someone said that LMC uses Taiwan/China junk. I used CPP, no complaints, good quality.

jay6891 · 11-24-2004, 10:20 AM

I figured something was up at that price, thanks for the info.

gr8scott51 · 11-24-2004, 12:03 PM

CPP or Early Classic Enterprises (ECE) www.earlyclassic.com

I've used both and have no complaints.

Tx Firefighter · 11-24-2004, 10:31 PM

Try to find an old school mom and pop type of parts store in your area. Have them get you either TRW or Moog parts. That way you get good stuff and still support the little man, who is the backbone of this country.

I hate LMC. They don't have any customer service to speak of. I like to look folks in the eye when doing business if I can.

chevybill · 11-29-2004, 09:54 AM

I put a complete front suspension rebuild together from summit racing.
It took about 2 weeks extra for the pitman arm, and all parts are MOOG.

This ended up about 100 cheaper than a comparable kit from ECE, however you have to talk to the right people, one guy went back into the paper catalogs to get part numbers for me and was very helpful.

11-17-2004, 09:44 AM	#1
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Anybody bought suspension parts from LMC anybody bought any suspension parts from LMC? Looking at their Front and Rear Suspension Kit. What brand of parts do they use? Part # 34-9065 includes everything for front rebuild including lowering springs. Rear gives you all poly bushings for rear control arms and track bar and lowering springs. All for a price of 600.00. Can't find anybody that comes close to this deal so wondering about quailty of parts. this is for a 68 c-10 with power steering. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

11-22-2004, 05:47 PM	#2
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	So I take it no one has any thoughts to this product? On to CCP. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

11-22-2004, 10:29 PM	#3
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	Someone said that LMC uses Taiwan/China junk. I used CPP, no complaints, good quality. __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

11-24-2004, 10:20 AM	#4
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	I figured something was up at that price, thanks for the info. __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

11-24-2004, 12:03 PM	#5
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	CPP or Early Classic Enterprises (ECE) www.earlyclassic.com I've used both and have no complaints. __________________ Silence is golden, duct tape is silver. - Scott

11-24-2004, 10:31 PM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Try to find an old school mom and pop type of parts store in your area. Have them get you either TRW or Moog parts. That way you get good stuff and still support the little man, who is the backbone of this country. I hate LMC. They don't have any customer service to speak of. I like to look folks in the eye when doing business if I can. __________________ I'm on the Instagram- @Gearhead_Kevin

11-29-2004, 09:54 AM	#7
chevybill Senior Member Join Date: Oct 2004 Location: calhoun city ms Posts: 940	I put a complete front suspension rebuild together from summit racing. It took about 2 weeks extra for the pitman arm, and all parts are MOOG. This ended up about 100 cheaper than a comparable kit from ECE, however you have to talk to the right people, one guy went back into the paper catalogs to get part numbers for me and was very helpful. __________________ ongoing 1970 c 10 lwb 1994 z-28 few mods.-owned since new 1978 vette silver/grey 25th anniv. paint



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.