just bought a blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longhorn71 · 12-21-2004, 01:05 AM

Hi!!!we joined the board in sept.we bought a 81 blazer last night.It is in good shape but has 2 small rust holes in the rear floor.could i use a pickup floor to pacth the holes?here are some pics of it went we picked it up

Tink · 12-21-2004, 08:19 AM

What are your plans for it?

I used fiberglass to patch a few holes in the floor pans of my 76 K5.

Blue Beard · 12-21-2004, 08:51 AM

I've got a 77 & 78 I'll sell you....

spencra · 01-11-2005, 09:40 AM

Quote:

Originally Posted by longhorn71

Hi!!!we joined the board in sept.we bought a 81 blazer last night.It is in good shape but has 2 small rust holes in the rear floor.could i use a pickup floor to pacth the holes?here are some pics of it went we picked it up

I don't see why you can't use a pickup bed floor to patch up your Blazer floor.
I'm almost positive it's the same ribbed pattern.

Nice Blazer too.

longhorn71 · 01-12-2005, 02:26 AM

thanks guys!! this is why i love this board

My plans for it are paint and body work.put the inside back together,and drive it!we are gonna use it for pulling the tent trailer as it will fit all four of us better.we have a Dodge quad cab too.I think the blazer is way cooler to use for camping and cruisin in

loblazer · 01-18-2005, 02:34 PM

Hi Dean:

Is this the same Bazer we were talking about? Anyway, I put a complete new floor in the back of mine from a pick up bed, got it for $100.
It works well but the ribs running front to back are a liitle bit different and don't quite line up but carpet will hide it. The ribs underneath are the same. My body guy just cut mine across the cab from side to side just where the rear seat bolts in at the front and then across in front of the tailgate area and down both sides. I also put in new wheel tubs at the same time. I will try to dig out my pics and email you.

Keep me in mind if you find another one.

Doug

longhorn71 · 01-18-2005, 10:53 PM

no doug this is a different one.i am using it for a project.the pics would be a big help.my addy is morrilldean@yahoo.ca thanks dean

loblazer · 01-19-2005, 04:06 PM

Ok will try to get it soon. I am going to Florida for 2 weeks so might not get to it until I get back.

Doug

12-21-2004, 01:05 AM	#1
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	just bought a blazer Hi!!!we joined the board in sept.we bought a 81 blazer last night.It is in good shape but has 2 small rust holes in the rear floor.could i use a pickup floor to pacth the holes?here are some pics of it went we picked it up

12-21-2004, 08:19 AM	#2
Tink Registered User Join Date: May 2002 Location: VA Posts: 1,337	What are your plans for it? I used fiberglass to patch a few holes in the floor pans of my 76 K5. __________________ 69 Chevy C10 88 Sierra 02 2500 Suburban And too many S10s to list!

12-21-2004, 08:51 AM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	I've got a 77 & 78 I'll sell you.... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-12-2005, 02:26 AM	#5
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	thanks guys!! this is why i love this board My plans for it are paint and body work.put the inside back together,and drive it!we are gonna use it for pulling the tent trailer as it will fit all four of us better.we have a Dodge quad cab too.I think the blazer is way cooler to use for camping and cruisin in

01-18-2005, 02:34 PM	#6
loblazer Senior Member Join Date: Mar 2004 Location: Fergus, Ontario Posts: 481	Hi Dean: Is this the same Bazer we were talking about? Anyway, I put a complete new floor in the back of mine from a pick up bed, got it for $100. It works well but the ribs running front to back are a liitle bit different and don't quite line up but carpet will hide it. The ribs underneath are the same. My body guy just cut mine across the cab from side to side just where the rear seat bolts in at the front and then across in front of the tailgate area and down both sides. I also put in new wheel tubs at the same time. I will try to dig out my pics and email you. Keep me in mind if you find another one. Doug

01-18-2005, 10:53 PM	#7
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	no doug this is a different one.i am using it for a project.the pics would be a big help.my addy is morrilldean@yahoo.ca thanks dean

01-19-2005, 04:06 PM	#8
loblazer Senior Member Join Date: Mar 2004 Location: Fergus, Ontario Posts: 481	Ok will try to get it soon. I am going to Florida for 2 weeks so might not get to it until I get back. Doug



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.