E-bay 2wd Blazer... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bouncytruck · 02-15-2005, 01:52 PM

This auction says that it is lowered with blocks in the back. Is that possible with trailing arms? Is this a converted Blazer?

LINKY

LUV2XCLR8 · 02-15-2005, 02:51 PM

Quote:

Originally Posted by bouncytruck

This auction says that it is lowered with blocks in the back. Is that possible with trailing arms? Is this a converted Blazer?

BOUNCER IF YA LOOK REAL CLOSE AT THE PIC YOU POSTED, IT APPEARS
THAT IT HAS TRAILING ARMS UNDER IT, LOOK IN FRONT OF REAR WHEEL,
AT LEAST IT LOOKS LIKE IT TO ME, I WISH I HAD $$$, I WANT A 2WD

bouncytruck · 02-15-2005, 03:13 PM

Quote:

Originally Posted by LUV2XCLR8

BOUNCER IF YA LOOK REAL CLOSE AT THE PIC YOU POSTED, IT APPEARSTHAT IT HAS TRAILING ARMS UNDER IT, LOOK IN FRONT OF REAR WHEEL,AT LEAST IT LOOKS LIKE IT TO ME

I didn't know you could put lowering blocks on trailing arms.

Quote:

Originally Posted by LUV2XCLR8

I WISH I HAD $$$, I WANT A 2WD

You and me both! I want that silver one listed on collectorcartraderonline for $30K!

**raggedjim** · 02-15-2005, 04:22 PM

Lowering blocks on trailing arms are pretty common, I got 'em...

Rg

**raggedjim** · 02-15-2005, 04:26 PM

Holy cow! 4" lowering blocks??? I don't think I would do that, the arms have to be close to the road let alone below the scrub line.

The most I'd go with blocks is 2" (I have 2" blocks and 4" drop springs)

Rg

bouncytruck · 02-15-2005, 06:26 PM

Good to know! I didn't know that lowering blocks worked on trailing arms. I've only owned 4wd Blazers (so far). That is a nice looking truck. Hopefully it goes to a good home.

LUV2XCLR8 · 02-15-2005, 06:55 PM

AT LEAST HE'S CLOSE ON THE PRODUCTION #'S

*HE STATES THAT ONLY 1,000 EVER MADE

*1971 2WD BLAZERS 1,277 UNITS PRODUCED

72BLAZERDUDE · 02-15-2005, 08:54 PM

No way that thing has 4 inch blocks in the back. It doesnt sit any lower than mine and its stock. 4 inch blocks would put those u bolts about 2 1/2 inches from the ground.

**raggedjim** · 02-15-2005, 08:55 PM

Don't know who's truck this is but I would be wary driving it, see how low the ends of the u-bolts are? Scary... I can't imagine 4" blocks....

Rg

Blue Beard · 02-15-2005, 09:41 PM

And he's running a 6 cyl.

With the lowering blocks, looks like it's a tool for ripping out speed bumps..

**FRENCHBLUE72** · 02-15-2005, 11:52 PM

Would not want to get a flat tire on that rig the u-bolts would be ground off along with some trailing arm..

*72CSTC5* · 02-16-2005, 10:07 AM

I saw that two about the 6 cyl. but in the description he states it has a v-8. I am watching this one. It's in Texas, I want one to drive while I finish mine.

**raggedjim** · 02-16-2005, 10:31 AM

72CSTC5, you are GREEDY!!!

jk, Rg

bouncytruck · 02-16-2005, 12:40 PM

raggedjim, I think you need to give one' of yours up - preferably to me

This is actually the second time that Blazer has been listed. Last time the descriptions listed both the 6 and 8 cyl. Good luck in your bidding 72CSTC5. Since I can't afford another one, you won't get any competition from me.

**raggedjim** · 02-16-2005, 01:05 PM

Once I get the jimmy on the road I may consider it...

Rg

02-15-2005, 01:52 PM	#1
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	E-bay 2wd Blazer... This auction says that it is lowered with blocks in the back. Is that possible with trailing arms? Is this a converted Blazer? LINKY __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-15-2005, 04:22 PM	#4
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,402	Lowering blocks on trailing arms are pretty common, I got 'em... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd

02-15-2005, 04:26 PM	#5
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,402	Holy cow! 4" lowering blocks??? I don't think I would do that, the arms have to be close to the road let alone below the scrub line. The most I'd go with blocks is 2" (I have 2" blocks and 4" drop springs) Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd

02-15-2005, 06:26 PM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Good to know! I didn't know that lowering blocks worked on trailing arms. I've only owned 4wd Blazers (so far). That is a nice looking truck. Hopefully it goes to a good home. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-15-2005, 06:55 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	AT LEAST HE'S CLOSE ON THE PRODUCTION #'S HE STATES THAT ONLY 1,000 EVER MADE 1971 2WD BLAZERS 1,277 UNITS PRODUCED __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-15-2005, 08:54 PM	#8
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 660	No way that thing has 4 inch blocks in the back. It doesnt sit any lower than mine and its stock. 4 inch blocks would put those u bolts about 2 1/2 inches from the ground. __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA

02-15-2005, 08:55 PM	#9
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,402	Don't know who's truck this is but I would be wary driving it, see how low the ends of the u-bolts are? Scary... I can't imagine 4" blocks.... Rg Attached Images __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd

02-15-2005, 09:41 PM	#10
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	And he's running a 6 cyl. With the lowering blocks, looks like it's a tool for ripping out speed bumps.. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-15-2005, 11:52 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Would not want to get a flat tire on that rig the u-bolts would be ground off along with some trailing arm.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-16-2005, 10:07 AM	#12
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	I saw that two about the 6 cyl. but in the description he states it has a v-8. I am watching this one. It's in Texas, I want one to drive while I finish mine.

02-16-2005, 10:31 AM	#13
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,402	72CSTC5, you are GREEDY!!! jk, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd

02-16-2005, 12:40 PM	#14
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	raggedjim, I think you need to give one' of yours up - preferably to me This is actually the second time that Blazer has been listed. Last time the descriptions listed both the 6 and 8 cyl. Good luck in your bidding 72CSTC5. Since I can't afford another one, you won't get any competition from me. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-16-2005, 01:05 PM	#15
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,402	Once I get the jimmy on the road I may consider it... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.