I need ideas...please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MandarinSixSeven · 08-09-2002, 03:45 PM

Ok heres the deal, i have my 67 gmc short-step...its got a 350 w 4-speed, has HEI, K&N filter, Dual exhaust...now what i need are some ideas for some upgrades/mods/power boosters that i can do pretty easily, and for not too much money, can anyone help me out?
thanks

diggin69 · 08-09-2002, 04:11 PM

well if thats all you have, intake,carb,or rejet carb,headers,duel exaust,bigger coil on H.E.I., spark plugs, 8.8 wires,change rear end gears, there is alot you can do best to sit & think of what kind of gain you really want.....then ask what you can do, performance upgrades are endless......

Bamm · 08-09-2002, 05:15 PM

Not enough info to go on but based on a stock motor. If you want to go fast you can do a camshaft upgrade, (nitrous ground), a good steel crank, bolt on some air flow research heads and a 750 dual pump Holley, then bolt on your nitrous setup and whallaa= your fast. Is it as easy as that? No, but to go fast you need money and this nitrous is the cheapest go fast add-on there is. But you need to make some upgrades to run it. One of my friends runs a 302 small block ford in a 84 stang and he's running 10.17's at 130mph with a 200 shot of nitrous. You just have to build your motor to take it.........JB

08-09-2002, 03:45 PM	#1
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	I need ideas...please Ok heres the deal, i have my 67 gmc short-step...its got a 350 w 4-speed, has HEI, K&N filter, Dual exhaust...now what i need are some ideas for some upgrades/mods/power boosters that i can do pretty easily, and for not too much money, can anyone help me out? thanks __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

08-09-2002, 04:11 PM	#2
diggin69 Southern but in Ohio!!!! Join Date: Jan 2002 Location: Eaton,Oh. 45320 Posts: 467	well if thats all you have, intake,carb,or rejet carb,headers,duel exaust,bigger coil on H.E.I., spark plugs, 8.8 wires,change rear end gears, there is alot you can do best to sit & think of what kind of gain you really want.....then ask what you can do, performance upgrades are endless...... __________________ 1969 C/10 3/4 ton 4x4 longbed custom, frame made from a 79 1972 custom-10 half/ton longbed 1980 1/2 ton 4x4 all original 350/350/205 with air Eaton,Oh rebelryder@hotmail.com

08-09-2002, 05:15 PM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Not enough info to go on but based on a stock motor. If you want to go fast you can do a camshaft upgrade, (nitrous ground), a good steel crank, bolt on some air flow research heads and a 750 dual pump Holley, then bolt on your nitrous setup and whallaa= your fast. Is it as easy as that? No, but to go fast you need money and this nitrous is the cheapest go fast add-on there is. But you need to make some upgrades to run it. One of my friends runs a 302 small block ford in a 84 stang and he's running 10.17's at 130mph with a 200 shot of nitrous. You just have to build your motor to take it.........JB __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.