Progress Today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jostrans68 · 08-10-2002, 07:55 PM

floor finished

jostrans68 · 08-10-2002, 07:56 PM

floor 2

jostrans68 · 08-10-2002, 07:56 PM

door aligned with new rocker

jostrans68 · 08-10-2002, 08:05 PM

I Had a good base to begin with I could have patched the rocker on this side but there was a 2 inch hole under it . I did patch that and replaced rocker

**68 Stepside** · 08-10-2002, 08:07 PM

So that's what a properly aligned door is supposed to look like? SWEET!

Truck's looking good!

TJ

**68 Stepside** · 08-10-2002, 08:08 PM

btw, dude, is that a ford fairmont I see?

(Drop a TT 302 in it, and you're good to go).

jostrans68 · 08-10-2002, 08:10 PM

Thanks trying to get cab ready to shoot primer. I still need to remove bed and fix a few dents on each corner of cab...The more parts I get on it and out of garage then I can get it back inside... lol

jostrans68 · 08-10-2002, 08:12 PM

Yes we have 2 of them one is a 5.0 the red one ya know any one looking for one i have a sweet 83 6cyl as tilt cruise air and sunroof needs a little tlc but runs great and is straight...

*racedvl* · 08-10-2002, 08:27 PM

Looking real nice!! I need to learn how to weld!! Once again, looking real good.

XXL · 08-10-2002, 09:50 PM

Excellent! I'm still working up the courage to actually fix my rockers and floor. I've cut out most of the cancer, just working up the nerve to start patching it.

Kenneth

chevyman 68 C/10 · 08-10-2002, 10:45 PM

Kenneth after looking at the dash prodject I wouldn't think you needed courage for any thing. Putting rockers on is easy -make sure to line up the doors before welding

joshtrans68 you are going to have a great truck - looking good man

**Classic Heartbeat** · 08-11-2002, 02:08 AM

Jack..... Great to see ya again! That cab is looking great!! You do exelent work. Are those the reproduction rockers that you have installed? Looks like they fit nice! WES www.ClassicHeartbeat.com

jostrans68 · 08-11-2002, 02:40 AM

Yea I got them from you last year, a little slow getting this thing going but better late than never:p

08-10-2002, 07:55 PM	#1
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Progress Today floor finished Attached Images __________________ [CGTW Member former 67-72 now with a 96 silverado

08-10-2002, 07:56 PM	#2
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	floor 2 Attached Images __________________ [CGTW Member former 67-72 now with a 96 silverado

08-10-2002, 07:56 PM	#3
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	door aligned with new rocker Attached Images __________________ [CGTW Member former 67-72 now with a 96 silverado

08-10-2002, 08:05 PM	#4
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	I Had a good base to begin with I could have patched the rocker on this side but there was a 2 inch hole under it . I did patch that and replaced rocker Attached Images __________________ [CGTW Member former 67-72 now with a 96 silverado

08-10-2002, 08:07 PM	#5
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	So that's what a properly aligned door is supposed to look like? SWEET! Truck's looking good! TJ __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

08-10-2002, 08:08 PM	#6
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	btw, dude, is that a ford fairmont I see? (Drop a TT 302 in it, and you're good to go). __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

08-10-2002, 08:10 PM	#7
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Thanks trying to get cab ready to shoot primer. I still need to remove bed and fix a few dents on each corner of cab...The more parts I get on it and out of garage then I can get it back inside... lol __________________ [CGTW Member former 67-72 now with a 96 silverado

08-10-2002, 08:12 PM	#8
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Yes we have 2 of them one is a 5.0 the red one ya know any one looking for one i have a sweet 83 6cyl as tilt cruise air and sunroof needs a little tlc but runs great and is straight... Attached Images __________________ [CGTW Member former 67-72 now with a 96 silverado

08-10-2002, 08:27 PM	#9
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Looking real nice!! I need to learn how to weld!! Once again, looking real good.

08-10-2002, 09:50 PM	#10
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Excellent! I'm still working up the courage to actually fix my rockers and floor. I've cut out most of the cancer, just working up the nerve to start patching it. Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

08-10-2002, 10:45 PM	#11
chevyman 68 C/10 Registered User Join Date: Feb 2002 Location: Gilmer, Texas USA Posts: 313	Kenneth after looking at the dash prodject I wouldn't think you needed courage for any thing. Putting rockers on is easy -make sure to line up the doors before welding joshtrans68 you are going to have a great truck - looking good man __________________ 69 Chevy short fleet side soon to have LT1 and 4L60E pb. ps cruise and air. 68 Chevy short fleet side 400 sb 5 inch chop top pb. ps. pw. 350 auto and shaved handles 68 anniversary no engine long wheel base 400 auto FOR SALE 68 Chevy fleet side long wheel base complete parts truck.

08-11-2002, 02:08 AM	#12
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Jack..... Great to see ya again! That cab is looking great!! You do exelent work. Are those the reproduction rockers that you have installed? Looks like they fit nice! WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

08-11-2002, 02:40 AM	#13
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Yea I got them from you last year, a little slow getting this thing going but better late than never:p __________________ [CGTW Member former 67-72 now with a 96 silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.