![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jan 2005
Location: Chilton, WI
Posts: 8
|
94 k1500 fuel problems
Ok here goes, I had a problem with the fuel pump in January. Changed the fuel pump and managed to knock the float arm loose from the sending unit. Remember it is January and I have no garage. BTW I live in WI. Two weeks ago decided to drop tank and reattach the float. That was successful, then pump acted up again last week. So I put another pump in it, now for the real problem. The fuel lines are leaking on the sending unit, I know I can't get them apart only leaks when ignition on. I am in need of sending unit and fairly rust free lines along the rails. I know the lines are the tought part.
Theront |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2003
Location: Broken Bow, OK
Posts: 1,385
|
You need to list cab and bed configuration. The lines are different for each one.
__________________
95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2005
Location: Chilton, WI
Posts: 8
|
Sorry,
Extended cab and short box I am going to drop the tank and see if I can flare a line and salvage anything, I still have to drive everyday. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2004
Posts: 23
|
do you know if what you need is the same for a 2wd I have a complete frame with tank and fuel lines it was a 94 c1500 extended cab short bed, the pump is new. let me know.
Last edited by my72k20; 07-21-2005 at 08:45 PM. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2005
Location: Chilton, WI
Posts: 8
|
I think it would be the same if not it would be made the same. How rusty are the lines and sending unit. I know I can't get the lines apart at the sending unit. Let me know please.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2004
Posts: 23
|
Last I looked they were in great shape. I will take a good look at the set up this weekend
|
![]() |
![]() |
![]() |
#7 |
Out draggin'
Join Date: Jan 2004
Location: Pitman,NJ
Posts: 1,574
|
If that don't work for you, try inlinetube.com I ordered my stainless brakelines from them for my 91' Ex Cab LB. They also have fuel & tranny lines...
![]() L8R - Joe
__________________
91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project" |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2005
Location: Chilton, WI
Posts: 8
|
Thanks for everyones help I broke down today and purchased a new sending unit, I am attempting to get the lines loose, I will come up with something to make it work. I am making a gas vapor or fog with the line as it is, it slowly collects on the frame and runs. I think serious safety concern.
Thanks Theront |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2005
Location: Chilton, WI
Posts: 8
|
To ease the minds. I have fixed the truck, don't know how long the lines will last but they are not leaking at this time and the sending unit has been replaced. I might be interested in lines yet if they were reasonable. Preventative measure
Theront |
![]() |
![]() |
![]() |
Bookmarks |
|
|