Need help! manifold torque specs! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RainDog · 04-20-2002, 06:26 PM

Hey guys, I know it's off topic, but I'm kind of rushed. Helping a buddy replace exhaust manifold gaskets on his truck this afternoon, and I need an idea what the torque specs are for the manifold bolts, or maybe a link to a reference site with the info. It's an 85 Blazer S10, but the engine is a 3.4L V-6 from a 1994 Camaro. Any help, thanks!

RainDog · 04-20-2002, 07:02 PM

ttt

trukman1 · 04-21-2002, 12:27 AM

Just call your local dealer , ask for service dept. and ask to speak to one of the mechanics. They'll usually tell you anything you need to know. Also, the library has repair manuals that will solve your problem if all else fails. Good luck.

Longhorn Man · 04-21-2002, 12:34 AM

I have never bothered with a torque wrench on exhaust manifolds. Pretty hard to mess them up.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

04-20-2002, 06:26 PM	#1
RainDog Registered User Join Date: Mar 2001 Location: Burien, WA, USA Posts: 391	Need help! manifold torque specs! Hey guys, I know it's off topic, but I'm kind of rushed. Helping a buddy replace exhaust manifold gaskets on his truck this afternoon, and I need an idea what the torque specs are for the manifold bolts, or maybe a link to a reference site with the info. It's an 85 Blazer S10, but the engine is a 3.4L V-6 from a 1994 Camaro. Any help, thanks! __________________ "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats."

04-20-2002, 07:02 PM	#2
RainDog Registered User Join Date: Mar 2001 Location: Burien, WA, USA Posts: 391	ttt __________________ "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats."

04-21-2002, 12:27 AM	#3
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Just call your local dealer , ask for service dept. and ask to speak to one of the mechanics. They'll usually tell you anything you need to know. Also, the library has repair manuals that will solve your problem if all else fails. Good luck. __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

04-21-2002, 12:34 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I have never bothered with a torque wrench on exhaust manifolds. Pretty hard to mess them up. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.