402 headache! Anyone help? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblok · 04-22-2002, 05:36 PM

I bought this from a reputable local rebuilder, (a 450 hp factory bore 402, allegedly from a 69 camaro). Little did I know, it would be much trouble.
I put it in, set it up, got 400mi, and it wiped out two rod bearings and the crank. This rebuilder "fixed" it, at MY cost. 200mi later, it snapped off a rocker arm stud (#5 exhaust). He "fixed" it again. 200mi later it started tapping, so I nursed it 2miles to get home, shut it down, and removed the valvecovers. The oil was GRITTY with metal flakes. I started it and observed that the pushrod on #5 exhaust was bent. As I went to shut it back down, it started knocking again,and got out a good 5-10 knocks before I got it turned off.
HOW *&^%$# AM I?
Any suggestions?
pcw73@yahoo.com

stllookn · 04-22-2002, 05:46 PM

Take your rebuilder to small claims court!

gearhead dave · 04-22-2002, 06:38 PM

looks like he stuck ya, besides, there is no 450hp 402 offered by chevrolet that i know of

------------------
1976 Crew Cab Dually (under construction)
1972 Suburban
1955 Pro Street Chevy
1985 S-10 Blazer (daily driver)
V W Sandrail
Located in Horn Lake, MS that's just 4 miles south of Memphis TN

www.classictruckshop.com/clubs/earlyburbs/members/gallery2/223/display.htm

Former engine builder for Racing Head Service
Performance Engines in Memphis TN. over 1,600 plus engines built by little ole me!!

GOD BLESS THE BRAVEST OF THE BRAVE...THE NEW YORK CITY FIRE FIGHTERS!!

Longhorn Man · 04-22-2002, 06:40 PM

Nor a stock bore 402 in '69...it woulda been a '70 if a 402, a 396 if a '69.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

bigblok · 04-23-2002, 11:09 AM

Well, the 402 was limited production in 69 camaro's.

68 Suburban · 04-23-2002, 11:21 AM

Hmmm, I have never heard of a 402, 69 Camaro.

------------------
Check out other members trucks

1968 50th Anniversary C-10 Suburban (Tows all these cars all over the place)
1968 50th Anniversary C-10 Pickup
1968 50th Anniversary C-20 Pickup CST, FOR SALE
1969 SS Camaro Conv't
1960 Lakewood Travel Trailer
1963 Ford Falcon Wagon, On Ebay for $1250
2000 Chevy Malibu (Suppose to be daily driver, but the Burb is)

Phoenix, AZ.

Click Here for Parts and Venicles I have Available

THINGS I AM LOOKING FOR:
67-68 SUBURBAN TRIM. $$$$ Reward
for finding the 3rd door trim piece
and the small piece that goes on
the 1/4 panel right behind the
3rd door.

bigblok · 04-23-2002, 11:26 AM

That's what I was told- reliable source, but maybe I should investigate further- anyone else ever heard of a 69 402?

69 longhorn · 04-23-2002, 11:28 AM

No, I dont beleive till 70.......

stea · 04-23-2002, 12:02 PM

heard years ago that they put a 402 in some of 69 z-28's

tom hand · 04-23-2002, 12:19 PM

67,68,69 Z-28 302 was only motor avalible
69,70 camaro 325hp or 385hp 396
71 camaro 330hp 402
72 camaro 255hp 402
http://home.att.net/~fteufert1/carbs/gmholley.htm

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

04-22-2002, 05:36 PM	#1
bigblok Registered User Join Date: May 2001 Location: bangor,pa usa Posts: 29	402 headache! Anyone help? I bought this from a reputable local rebuilder, (a 450 hp factory bore 402, allegedly from a 69 camaro). Little did I know, it would be much trouble. I put it in, set it up, got 400mi, and it wiped out two rod bearings and the crank. This rebuilder "fixed" it, at MY cost. 200mi later, it snapped off a rocker arm stud (#5 exhaust). He "fixed" it again. 200mi later it started tapping, so I nursed it 2miles to get home, shut it down, and removed the valvecovers. The oil was GRITTY with metal flakes. I started it and observed that the pushrod on #5 exhaust was bent. As I went to shut it back down, it started knocking again,and got out a good 5-10 knocks before I got it turned off. HOW *&^%$# AM I? Any suggestions? pcw73@yahoo.com __________________ 72 C10 475HP 402BBC Yes, it's fun, but gas ain't cheap!

04-22-2002, 05:46 PM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Take your rebuilder to small claims court! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

04-22-2002, 06:38 PM	#3
gearhead dave Registered User Join Date: Jul 2000 Location: horn lake,ms Posts: 388	looks like he stuck ya, besides, there is no 450hp 402 offered by chevrolet that i know of ------------------ 1976 Crew Cab Dually (under construction) 1972 Suburban 1955 Pro Street Chevy 1985 S-10 Blazer (daily driver) V W Sandrail Located in Horn Lake, MS that's just 4 miles south of Memphis TN www.classictruckshop.com/clubs/earlyburbs/members/gallery2/223/display.htm Former engine builder for Racing Head Service Performance Engines in Memphis TN. over 1,600 plus engines built by little ole me!! GOD BLESS THE BRAVEST OF THE BRAVE...THE NEW YORK CITY FIRE FIGHTERS!! __________________ 1976 Crew Cab Dually (under construction) 1972 Suburban 1955 Pro Street Chevy 1985 S-10 Blazer (daily driver) V W Sandrail Located in Horn Lake, MS that's just 4 miles south of Memphis TN www.classictruckshop.com/clubs/earlyburbs/members/gallery2/223/display.htm Former engine builder for Racing Head Service Performance Engines in Memphis TN. over 1,600 plus engines built by little ole me!! GOD BLESS THE BRAVEST OF THE BRAVE...THE NEW YORK CITY FIRE FIGHTERS!!

04-23-2002, 11:21 AM	#6
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Hmmm, I have never heard of a 402, 69 Camaro. ------------------ Check out other members trucks 1968 50th Anniversary C-10 Suburban (Tows all these cars all over the place) 1968 50th Anniversary C-10 Pickup 1968 50th Anniversary C-20 Pickup CST, FOR SALE 1969 SS Camaro Conv't 1960 Lakewood Travel Trailer 1963 Ford Falcon Wagon, On Ebay for $1250 2000 Chevy Malibu (Suppose to be daily driver, but the Burb is) Phoenix, AZ. Click Here for Parts and Venicles I have Available THINGS I AM LOOKING FOR: 67-68 SUBURBAN TRIM. $$$$ Reward for finding the 3rd door trim piece and the small piece that goes on the 1/4 panel right behind the 3rd door. __________________ Just sitting here contemplating contemplation.

04-23-2002, 11:26 AM	#7
bigblok Registered User Join Date: May 2001 Location: bangor,pa usa Posts: 29	That's what I was told- reliable source, but maybe I should investigate further- anyone else ever heard of a 69 402? __________________ 72 C10 475HP 402BBC Yes, it's fun, but gas ain't cheap!

04-22-2002, 06:40 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Nor a stock bore 402 in '69...it woulda been a '70 if a 402, a 396 if a '69. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-23-2002, 11:09 AM	#5
bigblok Registered User Join Date: May 2001 Location: bangor,pa usa Posts: 29	Well, the 402 was limited production in 69 camaro's. __________________ 72 C10 475HP 402BBC Yes, it's fun, but gas ain't cheap!

04-23-2002, 11:28 AM	#8
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	No, I dont beleive till 70....... __________________ http://community.webshots.com/user/hotrodhorn

04-23-2002, 12:02 PM	#9
stea Registered User Join Date: Mar 2000 Location: cedar hills utah USA Posts: 89	heard years ago that they put a 402 in some of 69 z-28's

04-23-2002, 12:19 PM	#10
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	67,68,69 Z-28 302 was only motor avalible 69,70 camaro 325hp or 385hp 396 71 camaro 330hp 402 72 camaro 255hp 402 http://home.att.net/~fteufert1/carbs/gmholley.htm ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.