blazer rear floor question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68350** · 05-29-2006, 05:39 PM

Does anyone know how a blazer bed floor(the rear section) is connected to the rest of the body? is it just bolted down, or is welded, too? also, anyone know how much the floor weighs? thanks

Rokcrln · 05-29-2006, 05:56 PM

Bad boy no double posting

Kevin
LFD Inc.

tom71 · 05-29-2006, 10:03 PM

no really id like to know too id bet that its bolted and spot welded together ,but how much does it weigh? i posted this question earlier and deleted the post when i saw this , and is it spot welded down the middle or is it one piece ? and im not trying to hijack thanks for any imput . tom

**68350** · 05-29-2006, 11:14 PM

tom71, as long as it's less than 100 lbs, greyhound will take it. someone must know

red71cheyenne · 05-30-2006, 11:32 AM

Its all one piece as far as the floor goes. It weighs about 100 lbs or there abouts. I was able to move mine around pretty easily. It bolts to the frame via the body mounts. The bed sides and wheel humps bolt to it. Right at the very back, there are two welds. One at the base of where the last stake pocket would be, and one down inside the tailgate opening just below the stake pocket. Its the same as a pickup bed. Jeff.

tom71 · 05-30-2006, 03:18 PM

thanks jeff for the info

vtblazer · 05-30-2006, 05:27 PM

Quote:

Originally Posted by red71cheyenne

Its all one piece as far as the floor goes.Its the same as a pickup bed. Jeff.

'cept length.

05-29-2006, 05:39 PM	#1
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	blazer rear floor question Does anyone know how a blazer bed floor(the rear section) is connected to the rest of the body? is it just bolted down, or is welded, too? also, anyone know how much the floor weighs? thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-29-2006, 05:56 PM	#2
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: blazer rear floor question Bad boy no double posting Kevin LFD Inc. Last edited by Rokcrln; 05-29-2006 at 05:56 PM.

05-29-2006, 10:03 PM	#3
tom71 what happened to flint mi Join Date: Oct 2005 Location: san diego Posts: 437	Re: blazer rear floor question no really id like to know too id bet that its bolted and spot welded together ,but how much does it weigh? i posted this question earlier and deleted the post when i saw this , and is it spot welded down the middle or is it one piece ? and im not trying to hijack thanks for any imput . tom __________________ 71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile

05-29-2006, 11:14 PM	#4
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: blazer rear floor question tom71, as long as it's less than 100 lbs, greyhound will take it. someone must know __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-30-2006, 11:32 AM	#5
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: blazer rear floor question Its all one piece as far as the floor goes. It weighs about 100 lbs or there abouts. I was able to move mine around pretty easily. It bolts to the frame via the body mounts. The bed sides and wheel humps bolt to it. Right at the very back, there are two welds. One at the base of where the last stake pocket would be, and one down inside the tailgate opening just below the stake pocket. Its the same as a pickup bed. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

05-30-2006, 03:18 PM	#6
tom71 what happened to flint mi Join Date: Oct 2005 Location: san diego Posts: 437	Re: blazer rear floor question thanks jeff for the info __________________ 71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.