VIN Plate Rivets? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 02-23-2007, 09:01 PM

Are those rivets still available that hold the VIN plate to the drivers door pillar? From what I remember they were 'star' shaped just like the originals.
Didn't one of our members have them on hand?

Thanks for the help,
72longbed

**breeh** · 02-23-2007, 09:16 PM

http://trimtags.com/rivets.html

*72longbed* · 02-23-2007, 10:45 PM

I went to that site, those are not the rivets I'm talking about. The rivets I need are for the door pillar and look like a six sided star when installed. I believe the 'trimtag' rivets are for under the hood.

Does anybody know where to get what I'm looking for?

Thanks,
72longbed

billsbowtie · 02-23-2007, 10:59 PM

me and board member bisquick65 used to sale them but i ran out. and the last time i talked to bisquick he was out to. we had the gm orig. ones.

timzrides · 02-23-2007, 11:01 PM

i'd be interested in some also if someone post that they have them.

thanks

RicksTrucks · 02-23-2007, 11:38 PM

Found this on another board, haven't tried calling the number yet. What you are looking for are called rosette rivets.

REPRODUCTION VIN rosette 6-sided rivets, holds serial # plate to dash or door pillar, correct looking reproduction, no tags, rivets only, correct for 60s-70s only, $45 pr, discounts to 10 pair or more purchases. 603-209-1678, NH. $45

**breeh** · 02-23-2007, 11:55 PM

TrimTags.com used to have the rosettes too. I am not sure if they still do but it would be worth calling them and asking.

gregbr · 02-24-2007, 12:00 AM

I got them from this person off e-bay......I think. bricklinboyz@rogers.com send them an e-mail and ask for the SS-VR rivets, they can send a picture to show you they are the correct ones. I got 4 shipped for $38 total. Also, the trim tag folks have them, but they don't have a picture to send you and they don't really advertise them, they are $12 each plus shipping. Hope this helps. Greg

chops333 · 02-24-2007, 07:49 AM

Nosrivets .com You Have To Ask For Them There 19.00 Per Pair

timzrides · 02-24-2007, 11:38 AM

thanks everyone...this helps me

RicksTrucks · 02-27-2007, 03:39 AM

> Question: Do you carry rosette rivets?

Yes, they are $25 per pair includes S&H. Just mail a check to address
below (personal checks are OK). Include your name and address and the make
and year of your car. Rivets are sent out the day after the order is

Joe Papier
Trim Tags, Inc.
900 Port Clinton Ct. W.
Buffalo Grove, IL 60089-6637
Ph/Fax: 847-478-TAGS
TRIMTAGS.COM

byrd · 02-27-2007, 08:30 AM

Quote:

Originally Posted by chops333

Nosrivets .com You Have To Ask For Them There 19.00 Per Pair

Can't find this site, I evn googled it with no luck.

chops333 · 02-27-2007, 08:33 PM

Quote:

Originally Posted by byrd

Can't find this site, I evn googled it with no luck.

sorry i was mistaken on the dot com it is email to nosrivets@ hotmail.com ask for rosettes they are stainless six sided original style i found this girl on ebay offering cowl tag rivets and i asked about vin rivets and for what ever reason they wont sell them on ebay there pricing is 19.00 free shipping for 2 if you buy like 11 sets there 15.00 per set maybe we could do a group buy save us all a few bucks no shipping todd

toomanytoyz · 02-27-2007, 09:23 PM

Put me in for a set.............

Thanks, Rick

02-23-2007, 09:01 PM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	VIN Plate Rivets? Are those rivets still available that hold the VIN plate to the drivers door pillar? From what I remember they were 'star' shaped just like the originals. Didn't one of our members have them on hand? Thanks for the help, 72longbed Last edited by 72longbed; 02-23-2007 at 09:01 PM.

02-23-2007, 09:16 PM	#2
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: VIN Plate Rivets? http://trimtags.com/rivets.html __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

02-23-2007, 10:45 PM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: VIN Plate Rivets? I went to that site, those are not the rivets I'm talking about. The rivets I need are for the door pillar and look like a six sided star when installed. I believe the 'trimtag' rivets are for under the hood. Does anybody know where to get what I'm looking for? Thanks, 72longbed

02-23-2007, 10:59 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: VIN Plate Rivets? me and board member bisquick65 used to sale them but i ran out. and the last time i talked to bisquick he was out to. we had the gm orig. ones.

02-23-2007, 11:01 PM	#5
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	Re: VIN Plate Rivets? i'd be interested in some also if someone post that they have them. thanks

02-23-2007, 11:38 PM	#6
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: VIN Plate Rivets? Found this on another board, haven't tried calling the number yet. What you are looking for are called rosette rivets. REPRODUCTION VIN rosette 6-sided rivets, holds serial # plate to dash or door pillar, correct looking reproduction, no tags, rivets only, correct for 60s-70s only, $45 pr, discounts to 10 pair or more purchases. 603-209-1678, NH. $45 __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-23-2007, 11:55 PM	#7
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: VIN Plate Rivets? TrimTags.com used to have the rosettes too. I am not sure if they still do but it would be worth calling them and asking. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

02-24-2007, 12:00 AM	#8
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: VIN Plate Rivets? I got them from this person off e-bay......I think. bricklinboyz@rogers.com send them an e-mail and ask for the SS-VR rivets, they can send a picture to show you they are the correct ones. I got 4 shipped for $38 total. Also, the trim tag folks have them, but they don't have a picture to send you and they don't really advertise them, they are $12 each plus shipping. Hope this helps. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

02-24-2007, 07:49 AM	#9
chops333 Registered User Join Date: Aug 2005 Location: mount airy n.c. Posts: 243	Re: VIN Plate Rivets? Nosrivets .com You Have To Ask For Them There 19.00 Per Pair

02-24-2007, 11:38 AM	#10
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	Re: VIN Plate Rivets? thanks everyone...this helps me

02-27-2007, 03:39 AM	#11
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: VIN Plate Rivets? > Question: Do you carry rosette rivets? Yes, they are $25 per pair includes S&H. Just mail a check to address below (personal checks are OK). Include your name and address and the make and year of your car. Rivets are sent out the day after the order is Joe Papier Trim Tags, Inc. 900 Port Clinton Ct. W. Buffalo Grove, IL 60089-6637 Ph/Fax: 847-478-TAGS TRIMTAGS.COM __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

02-27-2007, 09:23 PM	#14
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: VIN Plate Rivets? Put me in for a set............. Thanks, Rick



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.