Has enyone ever....... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 04-26-2007, 11:15 PM

or know anyone that has ever put a dashboard and steering column from a 73-87 chevy truck, into one of our trucks, blazers or burbs? if so do tou know what it would take to put one in?

**N2TRUX** · 04-27-2007, 12:00 AM

Just a guess...

*project 67 sub* · 04-27-2007, 12:26 AM

thats pretty funny.
pics of this mod would also help if anyone has any.

by the way N2TRUX, nice truck in your avatar.

GREASEMONKEY72 · 04-27-2007, 07:24 AM

why do you want to put one of those colums in? for tilt? if so you can get a colum out of a van and it bolts right in i believe

Bus Ted Knuckle · 04-27-2007, 08:50 AM

When I see a newer column in one of our trucks I kinda throw up in my mouth a little.

glock35ipsc · 04-27-2007, 10:02 AM

Lower left of this array

mvfd70 · 04-27-2007, 10:14 AM

That's a lot of work. I'm not really sure if I like it or not. I'm leaning towards not liking it though. I'm a stickler for stock.

Bus Ted Knuckle · 04-27-2007, 10:15 AM

Quote:

Originally Posted by glock35ipsc

Lower left of this array

Now that is very nice because the whole dash (well half anyway) has been grafted in. I like that.

72armyswbtruck · 04-27-2007, 11:00 AM

Quote:

Originally Posted by glock35ipsc

Lower left of this array

That is a nice lookin truck,
Where did you get those pics. Do you have any more.

glock35ipsc · 04-27-2007, 11:17 AM

http://www.****************.com/ct/ct.html

It's in the 1972 section. I think those are all thats there though.

Edit: Hmmm, not sure why all the ******* are showing up. Replace the ***** with ricks pickup parts, but with all three words ran together. Is that url banned from this site or something? Even when I type those three words together, it still shows up ******??

Longhorn Man · 04-27-2007, 05:04 PM

that 4X4 has been on e-bay a few times if I recall.
I have to ask also, why do you want to install the 73 - 87 dash? I'm not bashing here... Just curiouse... the dash on the 67 - 72 is simplistic and clean, just like the rest of the truck. Not over cluttered, easy to figure out, everything is in easyreach, nothing to bash your knees on... etc.

*project 67 sub* · 04-27-2007, 08:20 PM

Longhorn Man:
its just a thought, plus I have the whole truck. and I dont want my ride to be like everyone elses. that and it will be easier to hide a/c behind and it has a tilt column out of a 91' suburban and a custom dashface and newer dash pad. I also like the newer dashboard, but dont get me wrong the original dases are nice to.

*project 67 sub* · 04-28-2007, 09:15 PM

bump.

Spray-Bomb · 04-29-2007, 02:00 AM

Ok, I put the tilt column out of a 70 somethin chevy in my truck (well my dad did the mods)

I don't know what it takes to put a van column in, but this took A LOT of modification to make it work

But if you're like me & don't have any money, but want tilt then yes you can mod one to fit

Sorry no pics of the mods

glock35ipsc · 04-29-2007, 02:27 AM

Installing the van columns is pretty easy, here are a couple links from the FAQ's:

http://67-72chevytrucks.com/vboard/s...d.php?t=133937
http://67-72chevytrucks.com/vboard/s...ad.php?t=63328

old Chevy guy · 04-29-2007, 11:24 AM

The van columns do they have to be 77 and down or???

04-26-2007, 11:15 PM	#1
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Has enyone ever....... or know anyone that has ever put a dashboard and steering column from a 73-87 chevy truck, into one of our trucks, blazers or burbs? if so do tou know what it would take to put one in?

04-27-2007, 12:00 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Has enyone ever....... Just a guess... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

04-27-2007, 12:26 AM	#3
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Has enyone ever....... thats pretty funny. pics of this mod would also help if anyone has any. by the way N2TRUX, nice truck in your avatar. Last edited by project 67 sub; 04-27-2007 at 12:35 AM.

04-27-2007, 07:24 AM	#4
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Has enyone ever....... why do you want to put one of those colums in? for tilt? if so you can get a colum out of a van and it bolts right in i believe __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

04-27-2007, 08:50 AM	#5
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: Has enyone ever....... When I see a newer column in one of our trucks I kinda throw up in my mouth a little. __________________ Bill BEATERS ARE NEATER

04-27-2007, 10:02 AM	#6
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Has enyone ever....... Lower left of this array Attached Images __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 04-27-2007 at 10:04 AM.

04-27-2007, 10:14 AM	#7
mvfd70 Registered User Join Date: Jan 2007 Location: Opdyke, IL Posts: 775	Re: Has enyone ever....... That's a lot of work. I'm not really sure if I like it or not. I'm leaning towards not liking it though. I'm a stickler for stock. __________________ 1978 Chevrolet Silverado 3/4 ton 400 small block. 2000 F-250 Powerstroke 2002 GMC Yukon Denali XL

04-27-2007, 11:17 AM	#10
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Has enyone ever....... http://www.**************.com/ct/ct.html It's in the 1972 section. I think those are all thats there though. Edit: Hmmm, not sure why all the *** are showing up. Replace the * with ricks pickup parts, but with all three words ran together. Is that url banned from this site or something? Even when I type those three words together, it still shows up **?? __________________ Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!!** 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 04-27-2007 at 11:20 AM.

04-27-2007, 05:04 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Has enyone ever....... that 4X4 has been on e-bay a few times if I recall. I have to ask also, why do you want to install the 73 - 87 dash? I'm not bashing here... Just curiouse... the dash on the 67 - 72 is simplistic and clean, just like the rest of the truck. Not over cluttered, easy to figure out, everything is in easyreach, nothing to bash your knees on... etc.

04-27-2007, 08:20 PM	#12
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Has enyone ever....... Longhorn Man: its just a thought, plus I have the whole truck. and I dont want my ride to be like everyone elses. that and it will be easier to hide a/c behind and it has a tilt column out of a 91' suburban and a custom dashface and newer dash pad. I also like the newer dashboard, but dont get me wrong the original dases are nice to.

04-28-2007, 09:15 PM	#13
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Has enyone ever....... bump.

04-29-2007, 02:00 AM	#14
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Has enyone ever....... Ok, I put the tilt column out of a 70 somethin chevy in my truck (well my dad did the mods) I don't know what it takes to put a van column in, but this took A LOT of modification to make it work But if you're like me & don't have any money, but want tilt then yes you can mod one to fit Sorry no pics of the mods __________________ Just not low enough... ----------------------------- Sinister Killer

04-29-2007, 02:27 AM	#15
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Has enyone ever....... Installing the van columns is pretty easy, here are a couple links from the FAQ's: http://67-72chevytrucks.com/vboard/s...d.php?t=133937 http://67-72chevytrucks.com/vboard/s...ad.php?t=63328 __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

04-29-2007, 11:24 AM	#16
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: Has enyone ever....... The van columns do they have to be 77 and down or???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.