Looking at a 5 need some help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bucket o bolts · 08-07-2007, 11:24 PM

hi,
Looking at a 56 for a father/son/son project. Owner says it has a orginal V8 that is not a chevy motor? Maybe poncho motor 349? Did not say what trans it has. We are hoping for a manual 3 on the colum. Was the hydro matic availible in a stepside GMC with a V8? Also where is the commen rot areas? Cab corners, door bottoms, front cab mounts, fame?

Thanks for all help
Would be a father/ son /son drive and fix project

Sorry the "six" key is busted on my comp

CAL 58 GMC · 08-08-2007, 02:02 AM

Yes they were. The GMC's had Pontiac motors. The bottom front corners can rot out, when water coming through the cowl vent drains into the bottom corner and can plug up the drain holes with leaves and dirt not letting the water drain out. Also I've seen door hinge pockets rot out.

dwcsr · 08-08-2007, 04:19 AM

GMC had a Pontiac V8 that came with a std 3 column and a hydromatic.
Either way a GMC with the stock V8 is a relitively rare truck not your every day 56.
The GMC v8 was an actual truck engine not a warmed over car engine.

bucket o bolts · 08-08-2007, 11:20 AM

Thanks for all the help guys. This a project for my brother and dad really. He used to visit the site alot 84 400 is the name he used i think. He showed me your build up Cal 58, and i gotta say that is one sweet truck! We are still waiting to here back from the owner of this one.

Thanks for answering some of my questions.

I will ad some pics for every one maybe the trans can be Id'ed by the colum set up?

08-07-2007, 11:24 PM	#1
bucket o bolts Registered User Join Date: Mar 2007 Location: NH Posts: 8	Looking at a 5 need some help hi, Looking at a 56 for a father/son/son project. Owner says it has a orginal V8 that is not a chevy motor? Maybe poncho motor 349? Did not say what trans it has. We are hoping for a manual 3 on the colum. Was the hydro matic availible in a stepside GMC with a V8? Also where is the commen rot areas? Cab corners, door bottoms, front cab mounts, fame? Thanks for all help Would be a father/ son /son drive and fix project Sorry the "six" key is busted on my comp Last edited by bucket o bolts; 08-08-2007 at 11:22 AM.

08-08-2007, 02:02 AM	#2
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Looking at a 5 need some help Yes they were. The GMC's had Pontiac motors. The bottom front corners can rot out, when water coming through the cowl vent drains into the bottom corner and can plug up the drain holes with leaves and dirt not letting the water drain out. Also I've seen door hinge pockets rot out. __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

08-08-2007, 04:19 AM	#3
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Looking at a 5 need some help GMC had a Pontiac V8 that came with a std 3 column and a hydromatic. Either way a GMC with the stock V8 is a relitively rare truck not your every day 56. The GMC v8 was an actual truck engine not a warmed over car engine.

08-08-2007, 11:20 AM	#4
bucket o bolts Registered User Join Date: Mar 2007 Location: NH Posts: 8	Re: Looking at a 5 need some help Thanks for all the help guys. This a project for my brother and dad really. He used to visit the site alot 84 400 is the name he used i think. He showed me your build up Cal 58, and i gotta say that is one sweet truck! We are still waiting to here back from the owner of this one. Thanks for answering some of my questions. I will ad some pics for every one maybe the trans can be Id'ed by the colum set up? Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.