Power steering pump brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

EZ4U2C · 09-11-2007, 09:35 AM

Can someone tell me if it takes two brackets for a small block 350 power steering pump(1970) and where can you find them. My truck, I noticed someone has made a homemade bracket. It works but I can't adjust it any. Not to mention it looks out of place now that I've noticed it. I called around my local area savage yards but no one has a parts truck. Any help would be appreciated ............

**Yukon Jack** · 09-11-2007, 10:20 AM

Someone put a 400 sbc in my 70 K5. It's power steering pump has two brackets - one mounts to the front of the block using two bolts as shown here

and the other mounts to one of the motor mount bolts and then to the back of the pump

**Yukon Jack** · 09-11-2007, 10:22 AM

As for finding the correct brackets, a wanted post in the classified section will get you the brackets but you need to be a subscriber to post there.

johnnywagon · 09-11-2007, 03:32 PM

Stock brackets are near impossible to find anymore, at least 'round here anyway. Not many companies are making aftermarket brackets either. All the good ole' chrome companies like Mr. Gasket offer jack! However MARCH www.marchperformance.com has some cool stuff, but its dressy aluminum and not cheap. Make sure you know if its a long or short water pump set up before you buy anything...

Jtrux · 09-12-2007, 12:33 AM

Don't buy the march, it lines up with the pulley great but sticks the pump right against the alternator, it's designed to be used with all of their brackets.

LUV2XCLR8 · 09-14-2007, 10:13 PM

IIRC, These are OE brackets, PS on the left, Alt on the right, far right is
something else. This will give you a visual so you know what to look for.

69TowRig · 09-15-2007, 11:53 PM

http://www.truckandcarshop.com/ carries the brackets you need if you cannot find them used elsewhere. Here is a link to their catalog page, complete with some nice pictures: http://www.truckandcarshop.com/trucks60_72/t60_109.html

I run the brackets off a '72 on my '69, so even though they are a little different they can interchange if you find the earlier style stuff.

Jtrux · 09-16-2007, 01:36 AM

Quote:

Originally Posted by 69TowRig

http://www.truckandcarshop.com/ carries the brackets you need if you cannot find them used elsewhere. Here is a link to their catalog page, complete with some nice pictures: http://www.truckandcarshop.com/trucks60_72/t60_109.html

I run the brackets off a '72 on my '69, so even though they are a little different they can interchange if you find the earlier style stuff.

They're proud of their stuff but it looks nice.

69TowRig · 09-16-2007, 11:46 AM

Quote:

Originally Posted by Jtrux

They're proud of their stuff but it looks nice.

What blows my mind is that the cast piece is relatively cheap at $19 but the stamped steel piece is triple the cost?!?!?

09-11-2007, 09:35 AM	#1
EZ4U2C Registered User Join Date: Dec 2005 Location: North Carolina Posts: 257	Power steering pump brackets Can someone tell me if it takes two brackets for a small block 350 power steering pump(1970) and where can you find them. My truck, I noticed someone has made a homemade bracket. It works but I can't adjust it any. Not to mention it looks out of place now that I've noticed it. I called around my local area savage yards but no one has a parts truck. Any help would be appreciated ............ __________________ God loved me so much he gave me John 3:16 Buy American and bring our jobs back home. Trust what you believe in and believe in what you trust. Don't blame the gun, Blame the person who made you use it! _____________________________________________ 1970 swb 2002 Harley Davidson Road King Classic 2004 Dodge 4x4

09-11-2007, 10:20 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Power steering pump brackets Someone put a 400 sbc in my 70 K5. It's power steering pump has two brackets - one mounts to the front of the block using two bolts as shown here and the other mounts to one of the motor mount bolts and then to the back of the pump __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-11-2007, 10:22 AM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Power steering pump brackets As for finding the correct brackets, a wanted post in the classified section will get you the brackets but you need to be a subscriber to post there. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-11-2007, 03:32 PM	#4
johnnywagon Sofa King. We, Todd, Ed. Join Date: Oct 2006 Location: Spokane, Wa. Posts: 631	Re: Power steering pump brackets Stock brackets are near impossible to find anymore, at least 'round here anyway. Not many companies are making aftermarket brackets either. All the good ole' chrome companies like Mr. Gasket offer jack! However MARCH www.marchperformance.com has some cool stuff, but its dressy aluminum and not cheap. Make sure you know if its a long or short water pump set up before you buy anything... __________________ ~John 71 Blazer One Ton 65 Chevelle Station Wagon x2 59 Belair 2 Door 71 Chevy Open Road Van RV www.myspace.com/johnnywagon

09-12-2007, 12:33 AM	#5
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Power steering pump brackets Don't buy the march, it lines up with the pulley great but sticks the pump right against the alternator, it's designed to be used with all of their brackets. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

09-14-2007, 10:13 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Power steering pump brackets IIRC, These are OE brackets, PS on the left, Alt on the right, far right is something else. This will give you a visual so you know what to look for. Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-15-2007, 11:53 PM	#7
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Power steering pump brackets http://www.truckandcarshop.com/ carries the brackets you need if you cannot find them used elsewhere. Here is a link to their catalog page, complete with some nice pictures: http://www.truckandcarshop.com/trucks60_72/t60_109.html I run the brackets off a '72 on my '69, so even though they are a little different they can interchange if you find the earlier style stuff. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals... Last edited by 69TowRig; 09-15-2007 at 11:54 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.