'68 GMC/Chevy parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldsmobilekindofguy · 11-19-2007, 09:55 PM

If the bench seat isn't gone how much to ship to 57474

oldsmobilekindofguy · 11-19-2007, 09:56 PM

and would you part with the filler neck hole grommet if you can get it out in one piece

SBCustoms · 11-20-2007, 01:30 AM

Quote:

Originally Posted by oldsmobilekindofguy

If the bench seat isn't gone how much to ship to 57474

i looked at UPS and it said about $200 dollars to ship, but i was guessing on dim's. ill get some dims and let you know a more accurate, but theres a rough estimate. and for the grommet, ill just throw it in with the seat if you get it.
thanks, phil

john@thepier · 11-20-2007, 11:11 AM

Can you take some more pics of the grill for me. Front and back. You say no dents how about rust?

john@thepier · 11-23-2007, 06:40 PM

ttt

drman929 · 11-23-2007, 11:17 PM

Dibs on tailgate if others have passed. My zip is 72110 if you could get me a shipping quote.

SBCustoms · 11-29-2007, 10:58 PM

Quote:

Originally Posted by john@thepier

Can you take some more pics of the grill for me. Front and back. You say no dents how about rust?

the grille has only small rust spots behind the headlight bezels. i dont have it off yet, so i cant take very good behind pics.

SBCustoms · 11-29-2007, 10:59 PM

Quote:

Originally Posted by drman929

Dibs on tailgate if others have passed. My zip is 72110 if you could get me a shipping quote.

sorry man someone bought the gate already

SBCustoms · 11-29-2007, 10:59 PM

make me an offer on some of these parts

Cyclone44 · 11-29-2007, 11:36 PM

Is the gas tank clean? And does it have the sending unit? Is it from a 68? Thanks George

soba_03 · 11-30-2007, 04:29 PM

Ok I have to ask your the closes location to me that has some parts, Any god doors? I'd be interested in a pair or even one.. Thanks

SBCustoms · 12-01-2007, 11:44 AM

Quote:

Originally Posted by Cyclone44

Is the gas tank clean? And does it have the sending unit? Is it from a 68? Thanks George

i havent taken it out yet but the outside of it is clean and yes it has the sending unit, and yes its a 68. im sure the indside is alright bc i was driven this truck without any problems right before i took it apart and its been in the garage since.

SBCustoms · 12-01-2007, 11:45 AM

Quote:

Originally Posted by soba_03

Ok I have to ask your the closes location to me that has some parts, Any god doors? I'd be interested in a pair or even one.. Thanks

well my doors are alright, they have some rust towards the bottom, but i should be gettin a parts truck thats a 1970 very soon and it might have some good ones

soba_03 · 12-01-2007, 03:03 PM

Well if it's not to much bother shot me some pic's of what you have and price still may be interested. My doors are shot.

Thank you!

SBCustoms · 12-01-2007, 08:37 PM

Quote:

Originally Posted by soba_03

Well if it's not to much bother shot me some pic's of what you have and price still may be interested. My doors are shot.

Thank you!

well, when i get the other truck, ill let you know somethin.

Cyclone44 · 12-01-2007, 10:02 PM

I would like to come and check it out sat. or sun....let me know if possible....Thanks George

soba_03 · 12-01-2007, 11:43 PM

Thank you, Please use IM so I don't miss it... thank you again...

11-19-2007, 09:55 PM	#26
oldsmobilekindofguy Registered User Join Date: Aug 2007 Location: Stratford,SD Posts: 296	Re: '68 GMC/Chevy parts If the bench seat isn't gone how much to ship to 57474 __________________ 1967 c-10 longbox project, check it out in projects 1969 c-10 parts pickup, twisted frame Daily driver- 1970 Olds delta 88, 2dr., 455, gotta love the big block

11-19-2007, 09:56 PM	#27
oldsmobilekindofguy Registered User Join Date: Aug 2007 Location: Stratford,SD Posts: 296	Re: '68 GMC/Chevy parts and would you part with the filler neck hole grommet if you can get it out in one piece __________________ 1967 c-10 longbox project, check it out in projects 1969 c-10 parts pickup, twisted frame Daily driver- 1970 Olds delta 88, 2dr., 455, gotta love the big block

11-20-2007, 11:11 AM	#29
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: '68 GMC/Chevy parts Can you take some more pics of the grill for me. Front and back. You say no dents how about rust?

11-23-2007, 06:40 PM	#30
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: '68 GMC/Chevy parts ttt

11-23-2007, 11:17 PM	#31
drman929 Registered User Join Date: Nov 2006 Location: Arkansas Posts: 232	Re: '68 GMC/Chevy parts Dibs on tailgate if others have passed. My zip is 72110 if you could get me a shipping quote.

11-29-2007, 10:59 PM	#34
SBCustoms Complete Street Customization Join Date: Jan 2007 Location: Knoxville, TN Posts: 103	Re: '68 GMC/Chevy parts make me an offer on some of these parts __________________ 1968 GMC SWB (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=269230) 1998 Chevrolet Silverado Z71 Southern Born Customs Knoxville, TN 865-934-9126

11-29-2007, 11:36 PM	#35
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: '68 GMC/Chevy parts Is the gas tank clean? And does it have the sending unit? Is it from a 68? Thanks George

11-30-2007, 04:29 PM	#36
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: '68 GMC/Chevy parts Ok I have to ask your the closes location to me that has some parts, Any god doors? I'd be interested in a pair or even one.. Thanks

12-01-2007, 03:03 PM	#39
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: '68 GMC/Chevy parts Well if it's not to much bother shot me some pic's of what you have and price still may be interested. My doors are shot. Thank you!

12-01-2007, 10:02 PM	#41
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: '68 GMC/Chevy parts I would like to come and check it out sat. or sun....let me know if possible....Thanks George

12-01-2007, 11:43 PM	#42
soba_03 Registered User Join Date: Sep 2007 Location: Fairdale, Kentucky Posts: 561	Re: '68 GMC/Chevy parts Thank you, Please use IM so I don't miss it... thank you again...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.