WTB-Engine stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**D.PASSMORE** · 01-23-2008, 11:19 AM

I have 71 SWB 4x4 with a 454 CID squeezed between the rails, I’m going to change it back to a standard ‘71 – 350 CID, 4x4 setup. So, I’m looking for the following items:
1. Spark plug shields.
2. Little spark plug wire holders tabs that bolt to the oil pan and the ones that fit on the back of the motor and by the distributer.
3. Timing chain cover, timing tab and hardware for a 72 truck, 350 CID.
4. Valve cover set, 68-72 truck, Passenger side, standard / drivers side, big hole in rear for oil filler tube/front-pcv valve.
5. Also, a cap/plug that goes into the top of an oil filler tube. Dog chewed mine up…
6. Two belt, crankshaft/harmonic balancer pulley with bolts/ 2 belt water pump pully
7. Flywheel with bolts
8. 4x4 dipstick and tube
9. Any hardware, too.
I know some of this stuff is take –off time consuming with a low payback, but thanks for thinking about it, nothing really survives to long in Florida junkyards.

**D.PASSMORE** · 01-24-2008, 12:40 AM

Back up to the top!

Walts_restoration · 01-24-2008, 06:03 AM

get with teeitup (randy) he goes through alot of trucks.

**D.PASSMORE** · 01-24-2008, 08:10 AM

He is fresh out...Kinda hoping one of the bigger used parts dealers on the board will come through as a package.

**D.PASSMORE** · 01-25-2008, 10:05 AM

Hmmm?

**D.PASSMORE** · 01-26-2008, 11:42 AM

Ttt

454_72_4X4 · 01-27-2008, 03:22 AM

I probably have some of this stuff. I'll take a look and see.
Flywheel? manual trans or auto?

Pulleys, short waterpump or long?

**D.PASSMORE** · 01-27-2008, 04:24 AM

Flywheel, Auto / Short water pump. Thanks

**D.PASSMORE** · 01-28-2008, 06:19 AM

^^^^^^^

**FRENCHBLUE72** · 01-28-2008, 11:45 AM

I have the timing chain cover but you could most likely get one closer cheaper then the shipping would cost..

454_72_4X4 · 01-29-2008, 04:39 AM

Got some pics of the stuff I've found so far.
I might have the 2 groove waterpump pulley too, but i'm not sure. if I get pics of the ones I have, could you identify it?

The pulleys above can "stack up" to go various forms of pulleys;

**D.PASSMORE** · 01-29-2008, 09:46 AM

454, let me get some measurments on the Fly wheel, Its just the basic set up on the pullies, two belts on the crank and a single belt on water pump.

454_72_4X4 · 01-30-2008, 12:20 PM

Quote:

Originally Posted by D.PASSMORE

454, let me get some measurments on the Fly wheel, Its just the basic set up on the pullies, two belts on the crank and a single belt on water pump.

Most trucks would use the bigger flywheel I'd think. (168 tooth IIRC)

single groove water pump pulley will be alot easier to find. I'll get some pics asap.

I'll get some measurement on the crank pulleys too. one of them is bigger dia than the others.

**D.PASSMORE** · 01-30-2008, 02:59 PM

Give me through the weekend, I'll be out at my storage barn. I'll get some measurements an compare with you. Thanks _D

01-23-2008, 11:19 AM	#1
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	WTB-Engine stuff I have 71 SWB 4x4 with a 454 CID squeezed between the rails, I’m going to change it back to a standard ‘71 – 350 CID, 4x4 setup. So, I’m looking for the following items: 1. Spark plug shields. 2. Little spark plug wire holders tabs that bolt to the oil pan and the ones that fit on the back of the motor and by the distributer. 3. Timing chain cover, timing tab and hardware for a 72 truck, 350 CID. 4. Valve cover set, 68-72 truck, Passenger side, standard / drivers side, big hole in rear for oil filler tube/front-pcv valve. 5. Also, a cap/plug that goes into the top of an oil filler tube. Dog chewed mine up… 6. Two belt, crankshaft/harmonic balancer pulley with bolts/ 2 belt water pump pully 7. Flywheel with bolts 8. 4x4 dipstick and tube 9. Any hardware, too. I know some of this stuff is take –off time consuming with a low payback, but thanks for thinking about it, nothing really survives to long in Florida junkyards. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

01-24-2008, 12:40 AM	#2
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	Re: WTB-Engine stuff Back up to the top!

01-24-2008, 06:03 AM	#3
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: WTB-Engine stuff get with teeitup (randy) he goes through alot of trucks. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

01-24-2008, 08:10 AM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	Re: WTB-Engine stuff He is fresh out...Kinda hoping one of the bigger used parts dealers on the board will come through as a package.

01-25-2008, 10:05 AM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	Re: WTB-Engine stuff Hmmm?

01-26-2008, 11:42 AM	#6
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	Re: WTB-Engine stuff Ttt

01-27-2008, 03:22 AM	#7
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: WTB-Engine stuff I probably have some of this stuff. I'll take a look and see. Flywheel? manual trans or auto? Pulleys, short waterpump or long? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

01-27-2008, 04:24 AM	#8
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	Re: WTB-Engine stuff Flywheel, Auto / Short water pump. Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

01-28-2008, 06:19 AM	#9
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	Re: WTB-Engine stuff ^^^^^^^

01-28-2008, 11:45 AM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: WTB-Engine stuff I have the timing chain cover but you could most likely get one closer cheaper then the shipping would cost.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-29-2008, 04:39 AM	#11
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: WTB-Engine stuff Got some pics of the stuff I've found so far. I might have the 2 groove waterpump pulley too, but i'm not sure. if I get pics of the ones I have, could you identify it? The pulleys above can "stack up" to go various forms of pulleys; __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

01-29-2008, 09:46 AM	#12
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	Re: WTB-Engine stuff 454, let me get some measurments on the Fly wheel, Its just the basic set up on the pullies, two belts on the crank and a single belt on water pump.

01-30-2008, 02:59 PM	#14
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,052	Re: WTB-Engine stuff Give me through the weekend, I'll be out at my storage barn. I'll get some measurements an compare with you. Thanks _D



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.