chevy truck/car parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ssengines · 02-03-2003, 02:09 PM

79 truck parting out- front clip and hood $200, good glass d.s./p.s. $25 each, rear sliding $100 obo, doors complete $50 each, lwb bed dual tank $75, front bumpers ok condition $50, other misc. parts. 79 Z/28- subframe $150, rearend $150, tilt column $75, all parts in good shape. 79 Z/28 power doors $50 each rough but have good motors and glass, will sell glass seperately $25 each, rear spoiler $25, other misc. parts. 92 RS TPI wiring harness $50 also have TPI setup e-mail for price, other misc. interior parts for this car. 85 Z/28 3.73 disc brake rearend w/ booster, lines springs,etc. $300, power doors complete $100 each in good shape, back glass $100, stock Z/28 rearend $150 other misc. parts. Need to sell no time to work on anything, these are good deals you will hardly ever find. 79 T/A no motor, no tranny, has disc brake rearend, mostly complete $750. Olds 307 and o.d. tranny both in good shape $300 both or $150 each, motor runs good. Pontiac 400 motor started knocking shut it down, motor complete $300, Pontiac 400 turbo transmission in good shape, has been sittiing may need new front rear seals $200. For more info e-mail me ssengines@aol.com

YankeeWhite · 02-03-2003, 04:07 PM

How are the doors? Rust? Dents?
Where at in North Texas in relation to North Dallas/Denton?

Tom · 02-03-2003, 06:14 PM

Is it possable to get just the fenders and front valence panel?

I guess I should ask some questions first

Are the fenders rust free, dent and ding free, and no holes for trim/molding? If so I think I love you.

ok Im kidding about that, but Ive been looking for OEM fenders for months now. Heck, Ill even buy everything and sell the hood if I have too, or if anyone else wants to go in on the front clip and take the hood themselfs?

ssengines · 02-03-2003, 07:13 PM

I really need to get rid of the whole clip. If you want everthing but the hood what are you willing to offer?

Tom · 02-03-2003, 07:20 PM

I would take the whole thing, but shipping would be killer to phoenix AZ for the whole thing dont you think? If you can get it shipped out for $250 total, I would take it. If not, then hows $125 for the fenders and valence sound? The fenders are strait, dent/ding/hole free correct? BTW my area code is 85203

ssengines · 02-03-2003, 07:22 PM

The drivers side is better than the passenger side. A few minor dings no dents and very little if any rust. The passenger door has about a 1 inch crack below the wing window, may need some wire welding maybe or you could just patch it up.

ssengines · 02-03-2003, 07:25 PM

im me at ssengines@aol.com that might work out

ssengines · 02-03-2003, 07:46 PM

the plastic has a few minor scratches but no cracks. I'll take $15 for it.

gchemist · 02-03-2003, 09:43 PM

Does the 79 have the door type gas doors? I need the plastic gas hose holder for the passenger side.

*rayville body* · 02-03-2003, 10:02 PM

is the tilt out of the 79 camaro? do you have the steering box off the camaro also? how much for it?

ssengines · 02-04-2003, 12:02 PM

I'll take $75 for the tilt column and $60 for the steering box

02-03-2003, 02:09 PM	#1
ssengines Registered User Join Date: Feb 2003 Location: North Texas Posts: 7	chevy truck/car parts 79 truck parting out- front clip and hood $200, good glass d.s./p.s. $25 each, rear sliding $100 obo, doors complete $50 each, lwb bed dual tank $75, front bumpers ok condition $50, other misc. parts. 79 Z/28- subframe $150, rearend $150, tilt column $75, all parts in good shape. 79 Z/28 power doors $50 each rough but have good motors and glass, will sell glass seperately $25 each, rear spoiler $25, other misc. parts. 92 RS TPI wiring harness $50 also have TPI setup e-mail for price, other misc. interior parts for this car. 85 Z/28 3.73 disc brake rearend w/ booster, lines springs,etc. $300, power doors complete $100 each in good shape, back glass $100, stock Z/28 rearend $150 other misc. parts. Need to sell no time to work on anything, these are good deals you will hardly ever find. 79 T/A no motor, no tranny, has disc brake rearend, mostly complete $750. Olds 307 and o.d. tranny both in good shape $300 both or $150 each, motor runs good. Pontiac 400 motor started knocking shut it down, motor complete $300, Pontiac 400 turbo transmission in good shape, has been sittiing may need new front rear seals $200. For more info e-mail me ssengines@aol.com

02-03-2003, 06:14 PM	#3
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,702	Is it possable to get just the fenders and front valence panel? I guess I should ask some questions first Are the fenders rust free, dent and ding free, and no holes for trim/molding? If so I think I love you. ok Im kidding about that, but Ive been looking for OEM fenders for months now. Heck, Ill even buy everything and sell the hood if I have too, or if anyone else wants to go in on the front clip and take the hood themselfs? __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

02-03-2003, 07:13 PM	#4
ssengines Registered User Join Date: Feb 2003 Location: North Texas Posts: 7	79 front clip I really need to get rid of the whole clip. If you want everthing but the hood what are you willing to offer?

02-03-2003, 07:20 PM	#5
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,702	I would take the whole thing, but shipping would be killer to phoenix AZ for the whole thing dont you think? If you can get it shipped out for $250 total, I would take it. If not, then hows $125 for the fenders and valence sound? The fenders are strait, dent/ding/hole free correct? BTW my area code is 85203 __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

02-03-2003, 07:22 PM	#6
ssengines Registered User Join Date: Feb 2003 Location: North Texas Posts: 7	79 chevy truck doors The drivers side is better than the passenger side. A few minor dings no dents and very little if any rust. The passenger door has about a 1 inch crack below the wing window, may need some wire welding maybe or you could just patch it up.

02-03-2003, 04:07 PM	#2
YankeeWhite Registered User Join Date: Jan 2002 Location: Manhattan KS USA Posts: 117	How are the doors? Rust? Dents? Where at in North Texas in relation to North Dallas/Denton?

02-03-2003, 07:25 PM	#7
ssengines Registered User Join Date: Feb 2003 Location: North Texas Posts: 7	chevy front clip im me at ssengines@aol.com that might work out

02-03-2003, 07:46 PM	#8
ssengines Registered User Join Date: Feb 2003 Location: North Texas Posts: 7	instrument cluster plastic the plastic has a few minor scratches but no cracks. I'll take $15 for it.

02-03-2003, 09:43 PM	#9
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Does the 79 have the door type gas doors? I need the plastic gas hose holder for the passenger side. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

02-03-2003, 10:02 PM	#10
rayville body Account Suspended Join Date: Nov 2002 Location: rayville,LA Posts: 226	is the tilt out of the 79 camaro? do you have the steering box off the camaro also? how much for it?

02-04-2003, 12:02 PM	#11
ssengines Registered User Join Date: Feb 2003 Location: North Texas Posts: 7	camaro parts I'll take $75 for the tilt column and $60 for the steering box



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.