Blazer seats different? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HarrisonTX · 08-17-2008, 03:02 AM

Hey guys!
So, i recently purchased a '86 blazer. One of the main problems it has, is awful front seats, they dont match, and neither are factory. The driver side back is broken, so it must be propped up with something, and they are both very very dirty.

So, my question is, are blazer seats different from say, and 86' truck? It seems like i sit very high in them, it may have something to do with the fact, they must lean up to allow back seat access.
I really need new seats, and am wondering if i can get truck seats, or if i must get blazer seats. Maybe i can get truck seats, and use blazer tracks?

i have done plenty or motor, tranny, and rearend swaps, but never a seat swap, lol.

Thanks guys

tobiahr · 08-18-2008, 09:14 AM

you can use truck seats but they make getting in and out of the back an issue and sit about 3 inches lower. i have 2 older sets of blazer seats that would need to be recovered that you can have if you come get them..short 8 hour trip to austin

tvblazer78 · 08-18-2008, 05:50 PM

The floor is flat in a blazer and is not in a truck..

Jonboy · 08-18-2008, 06:53 PM

by drilling a couple of holes, you can also adapt Suburban buckets to the Blazer tracks as well.

HarrisonTX · 08-19-2008, 07:17 PM

So truck seats, with truck tracks are a no go i gather?
What about truck seats, fitted to blazer tracks? is that possible?
Thanks for the info so far.
8 hour drive from austin? I made it from west fort worth to here in 10 hours, and was told i hauled all. I think austin would be more like 12 hours from Co. Springs?
Im down in fort worth alot, i may just have to take you up on that offer tobi

**N2TRUX** · 08-19-2008, 11:11 PM

The truck buckets should bolt to the Blazer brackets. It would be easier to find Suburban buckets since almost all Burbs came with buckets.

Hoods69BadBowTie · 08-20-2008, 10:14 PM

Yea I would try to get some more Blazer seats or at lest suburban seats and make them work. It would just make it a lot easyier in my opinion.

08-17-2008, 03:02 AM	#1
HarrisonTX Registered User Join Date: Nov 2003 Location: Waco TX Posts: 247	Blazer seats different? Hey guys! So, i recently purchased a '86 blazer. One of the main problems it has, is awful front seats, they dont match, and neither are factory. The driver side back is broken, so it must be propped up with something, and they are both very very dirty. So, my question is, are blazer seats different from say, and 86' truck? It seems like i sit very high in them, it may have something to do with the fact, they must lean up to allow back seat access. I really need new seats, and am wondering if i can get truck seats, or if i must get blazer seats. Maybe i can get truck seats, and use blazer tracks? i have done plenty or motor, tranny, and rearend swaps, but never a seat swap, lol. Thanks guys __________________ '69 custom/camper '74 260z 302 chevy/tko500 swap in progrss '79 Malibu 355 all forged 4 speed car. '86 k5 blazer '06 Duramax

08-18-2008, 09:14 AM	#2
tobiahr Registered User Join Date: Nov 2007 Location: Lincoln NE Posts: 513	Re: Blazer seats different? you can use truck seats but they make getting in and out of the back an issue and sit about 3 inches lower. i have 2 older sets of blazer seats that would need to be recovered that you can have if you come get them..short 8 hour trip to austin Last edited by tobiahr; 08-18-2008 at 09:16 AM.

08-18-2008, 05:50 PM	#3
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Blazer seats different? The floor is flat in a blazer and is not in a truck.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

08-18-2008, 06:53 PM	#4
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Blazer seats different? by drilling a couple of holes, you can also adapt Suburban buckets to the Blazer tracks as well.

08-19-2008, 07:17 PM	#5
HarrisonTX Registered User Join Date: Nov 2003 Location: Waco TX Posts: 247	Re: Blazer seats different? So truck seats, with truck tracks are a no go i gather? What about truck seats, fitted to blazer tracks? is that possible? Thanks for the info so far. 8 hour drive from austin? I made it from west fort worth to here in 10 hours, and was told i hauled all. I think austin would be more like 12 hours from Co. Springs? Im down in fort worth alot, i may just have to take you up on that offer tobi __________________ '69 custom/camper '74 260z 302 chevy/tko500 swap in progrss '79 Malibu 355 all forged 4 speed car. '86 k5 blazer '06 Duramax

08-19-2008, 11:11 PM	#6
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Blazer seats different? The truck buckets should bolt to the Blazer brackets. It would be easier to find Suburban buckets since almost all Burbs came with buckets. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-20-2008, 10:14 PM	#7
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Blazer seats different? Yea I would try to get some more Blazer seats or at lest suburban seats and make them work. It would just make it a lot easyier in my opinion. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.