Glove Box Door Emblem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sinister · 10-10-2008, 01:33 PM

Just received my new glovebox door emblem. Looks like it needs to be secured from the backside. How am I supposed to do that? Should I just glue it?

Dingfodgy · 10-10-2008, 03:28 PM

Actually the posts on the emblem go into funky little barbed (for lack of a better term) inserts that are crimped into holes in the face of the G-box door.
I don't know if they are reproduced or not, but you might check your local automotive painting supply house...they usually carry those kinds of things.

Sinister · 10-10-2008, 03:34 PM

They sent me little washer things that have to go on from the backside. I'll have to look for those ones you mentioned, or I might just glue it on and be done with it.

prg machine · 10-10-2008, 04:57 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=300528

you might find ideas here

prg machine · 10-10-2008, 05:02 PM

these guys sell those inserts...............ya have to search in the on line catalog

http://www.classicindustries.com/

BLACK AND BLUE 67-72 · 10-10-2008, 05:10 PM

There called tubular speed nuts...

BLACK AND BLUE 67-72 · 10-10-2008, 05:12 PM

If you can get in touch with a company called Kimball Midwest, they have them.

Sinister · 10-10-2008, 05:33 PM

Thanks guys. I think I'm just gonna glue it down. I'm not the most patient sort.

prg machine · 10-11-2008, 12:24 AM

Quote:

Originally Posted by Sinister

Thanks guys. I think I'm just gonna glue it down. I'm not the most patient sort.

think twice....................before you cut the studs off the back it will only take a few minutes to do it right and order the inserts and drill some holes. You don't have a trim on there now, so why rush , it can wait.

You can't put the studs back on.....................but you can wait to do it right!

R.L. · 10-11-2008, 07:34 AM

Where can you get new stickers from? Are they aftermarket or does GM offer them?

Sinister · 10-11-2008, 09:53 AM

Quote:

Originally Posted by prg machine

think twice....................before you cut the studs off the back it will only take a few minutes to do it right and order the inserts and drill some holes. You don't have a trim on there now, so why rush , it can wait.

You can't put the studs back on.....................but you can wait to do it right!

I have a Chevrolet Custom emblem on there now, so the holes are already there. Do you think the inserts that are there will stay if I remove the old emblem?

BLACK AND BLUE 67-72 · 10-11-2008, 12:23 PM

Sometimes they will stay in there but not always...

Sinister · 10-11-2008, 12:41 PM

Went out to the truck and pried the emblem up. Speed nuts stayed. Joy.

BLACK AND BLUE 67-72 · 10-11-2008, 12:51 PM

Awesome!!!!!!!!

prg machine · 10-11-2008, 01:01 PM

Quote:

Originally Posted by R.L.

Where can you get new stickers from? Are they aftermarket or does GM offer them?

Brothers sells them

10-10-2008, 01:33 PM	#1
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Glove Box Door Emblem Just received my new glovebox door emblem. Looks like it needs to be secured from the backside. How am I supposed to do that? Should I just glue it? __________________ Beat it to fit, Paint it to match...

10-10-2008, 03:28 PM	#2
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: Glove Box Door Emblem Actually the posts on the emblem go into funky little barbed (for lack of a better term) inserts that are crimped into holes in the face of the G-box door. I don't know if they are reproduced or not, but you might check your local automotive painting supply house...they usually carry those kinds of things. __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")

10-10-2008, 03:34 PM	#3
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Glove Box Door Emblem They sent me little washer things that have to go on from the backside. I'll have to look for those ones you mentioned, or I might just glue it on and be done with it. __________________ Beat it to fit, Paint it to match...

10-10-2008, 04:57 PM	#4
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Glove Box Door Emblem http://67-72chevytrucks.com/vboard/s...d.php?t=300528 you might find ideas here __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

10-10-2008, 05:02 PM	#5
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Glove Box Door Emblem these guys sell those inserts...............ya have to search in the on line catalog http://www.classicindustries.com/ __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

10-10-2008, 05:10 PM	#6
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: Glove Box Door Emblem There called tubular speed nuts... __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

10-10-2008, 05:12 PM	#7
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: Glove Box Door Emblem If you can get in touch with a company called Kimball Midwest, they have them. __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

10-10-2008, 05:33 PM	#8
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Glove Box Door Emblem Thanks guys. I think I'm just gonna glue it down. I'm not the most patient sort. __________________ Beat it to fit, Paint it to match...

10-11-2008, 07:34 AM	#10
R.L. Registered User Join Date: Sep 2008 Location: Mobile, Al. Posts: 687	Re: Glove Box Door Emblem Where can you get new stickers from? Are they aftermarket or does GM offer them?

10-11-2008, 12:23 PM	#12
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: Glove Box Door Emblem Sometimes they will stay in there but not always... __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

10-11-2008, 12:41 PM	#13
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Glove Box Door Emblem Went out to the truck and pried the emblem up. Speed nuts stayed. Joy. __________________ Beat it to fit, Paint it to match...

10-11-2008, 12:51 PM	#14
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: Glove Box Door Emblem Awesome!!!!!!!! __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.