|
10-11-2008, 05:58 PM
|
#1 |
|
Chevy nut
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,266
|
^%*&^$&*^#
Well here I was at a light. I was stopping so I went to down shift...noticed I couldnt get it back in gear. All I got was grinding. In the outside lane...of course. So anyways I am sitting there thinking...ok the clutch isnt out. I am grinding. So there for disc and pressure plate is still working. So I shut off the truck put it in reverse and start it up again and back into a parking lot. Shut the truck off and wait for traffic to go away. Once traffic is gone...I start it up and while its turning over its moving with the clutch on the floor. I am only 4 blocks from home. I take off and tried to shift. No such luck. I had to stop and shut the truck off again and put in in gear again and start it up. So what I am thinking is the throw out bearing went out. The GTO has to get out of the garage so I can put the truck in there and fix it.
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" |
|
|
|
10-11-2008, 06:18 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: ^%*&^$&*^#
I've broken springs in the clutch disk and had this same symptoms
|
|
|
|
|
10-11-2008, 06:22 PM
|
#3 | |
|
Chevy nut
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,266
|
Re: ^%*&^$&*^#
Quote:
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" |
|
|
|
|
|
10-11-2008, 06:41 PM
|
#4 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: ^%*&^$&*^#
One way or another,you got no clutch and she`s gonna need torn down.That sucks.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
10-11-2008, 06:54 PM
|
#5 |
|
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: ^%*&^$&*^#
that sucks but...
FYI the cheapest clutch I found was the kit from advanced auto for $139. Had everything you need for a full rebuild... $50 more to get the flywheel ground if needed.
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
|
|
|
|
10-11-2008, 07:13 PM
|
#6 | |
|
Chevy nut
Join Date: Jun 2007
Location: Springfield, Illinois
Posts: 2,266
|
Re: ^%*&^$&*^#
Quote:
__________________
84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
