Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-11-2003, 12:29 PM | #15 |
Registered User
Join Date: Nov 2002
Location: raleigh, NC
Posts: 60
|
I agree with these guys.
You can check for sure even when the truck is standing still. Put it in 2 hi with the hubs unlocked, crawl under the truck and turn the front driveshaft by hand, IF you are in 2hi then it should turn freely. Then put it in 4hi and repeat and you should NOT be able to spin the fron shaft. Do this at every red light to make sure your always in 2hi Good luck
__________________
1971 GMC Jimmy 350/350/205/D60/14bolt on 38's 1984 M1008 CUCV 6.2/TH400/208/D60/14bolt on 36's 1991 W250 5.9/G360/205/D60/D70 on 33's (tow-rig) Lotsa Full Size Jeeps (J10/J20)! Adam |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|