|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-02-2009, 01:09 PM
|
#1 |
|
Registered User
Join Date: Oct 2009
Location: parksville,BC
Posts: 1
|
Help with a 292 (1967 vintage)
I have a 292 Chev in a Massey 410 combine which I picked up last season. It smoked badly but did the job. I replaced 3 broken push-rods, and put in new ignition components, cleaned the carb. Right now it idles beautifully, runs at no-load governed speed smoothly. When i engage the combine the motor runs smoothly for from 5 seconds to 4 minutes, and then starts backfiring and looses power. Disengaging the combine and idling for a few seconds has it running smoothy again, and then it will rev up again.Fuel flow seems all right but this AM am putting a pressure gauge at the carb. The plugs are all burning cleanly and look textbook, and the exhaust doesn't smoke. Points are set at .016 and they contact almost fully. I'm running out of smart ideas-and also dry days to get this grain off. This site looks like a good one to ask for help...Thanx...Karl
Last edited by massey 410; 10-03-2009 at 02:40 AM. Reason: typos |
|
|
|
10-02-2009, 09:09 PM
|
#2 |
|
Happy Camper
Join Date: Feb 2006
Location: Northern California
Posts: 8,408
|
Re: Help with a 292 (1967 vintage)
You might try posting here:
http://67-72chevytrucks.com/vboard/f...splay.php?f=24 But let me say... Welcome aboard from Northern California!
__________________
RIP El Jay! Love you brother! |
|
|
|
|
10-03-2009, 09:50 PM
|
#3 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: Help with a 292 (1967 vintage)
Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
