Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-12-2009, 10:06 PM | #19 |
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: Buying Vintage Air - Need Help W/ Bracket Choices
I can get another pic of the L/H side where the A/C unit would mount if you would like. But I did have these two pics already saved which might give you an idea. The Serp setup I used was from a 94 GMC. It is a 1 piece serp setup bracket. There is a two piece serp setup slightly more common. Used on Chevy V-6's and the small block V-8s also. That is what my son used on his small block. Very little difference except one is two piece cast metal and the one I used is one piece steel serp. Both are very common at junk yards. We had our serp setups powder coated. Also since i didn't immediately need my A/C pump I had to use a delete A/C pully that is the pulley in the upper left corner.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
Bookmarks |
Tags |
alternator, brackets, compressor, driver's side, vintage air |
|
|