'72 hot tub - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mike Culpepper · 04-26-2003, 10:59 AM

We got hammered the other day with thunderstorms. After the rain stopped I was going to Autozone for something or the other and noticed that I had about 8 " of water in the front part of the bed of my truck. I noticed that these trucks(or at least mine) , don't have any drain holes in the front part of the bed like my '89 Silverado did. Have any of ya'll drilled a hole in the front corners of the bed to allow water to drain out?
Mike

70c10 · 04-26-2003, 11:51 AM

My 70' has drain holes that were in it.

gr8scott51 · 04-26-2003, 11:53 AM

When I tore out the rotten wood from my short stepside and welded in a metal bed floor from a newer box, I made sure to leave the drain holes. Even when I got it rhino lined, I had them keep the drain holes open. It's one of the areas you always see rusted out on fleetsides. I think it's a good idea. Be sure to keep your door drain holes open too. good luck, Scott

Hutch · 04-26-2003, 12:14 PM

Mike,
My 71 and 68 beds both have drain holes.
They are actually not in the bed floor but are in the panel closest to the cab.
They are in the corners of the bed at the bottom close to the sides.
In fact they are not really round holes but are like a quarter inch size rounded on the top and flat towards the bottom the bottom.
I have seen the replacement panels for the beds and the ones I have seen do come with these already there.

krazy_texan · 04-26-2003, 12:32 PM

mine is the same as hutches the only problem for me though is keeping them unclogged as my parking spot is under a tree

Mike Culpepper · 04-26-2003, 01:39 PM

Hutch,
I can't orient myself to your pic. I went out and took this pic of the inside bed looking at the front drivers side corner.
Is this the area where your pic is taken?
Mike

Mike Culpepper · 04-26-2003, 01:44 PM

For some reason I con't get the pic to work!
Mike

mtdave2 · 04-26-2003, 03:10 PM

i have been looking at the thick plastic sheeting i have and then looking at the truck bed.... hum... redneck portable swimming pool.. just might do that soon

*Gee_Emm* · 04-26-2003, 03:19 PM

I have holes drilled but I did them small so sometimes they get clogged up. But it is a good way to prevent rust.

Hutch · 04-26-2003, 03:42 PM

Mike,
The bed is off of the truck.
The picture was taken looking from between the cab and bed on the outside towards the back on the passenger side.
Here is one from the inside the bed looking forward towards the drivers side.
The hole is sort of hard to see due to the colors.

Have fun

Green72GMC · 04-26-2003, 04:18 PM

I got drain holes but they arent exactly stock and they werent drilled. Its not a little drain hole either its about 1 inch across and in the middle of the bed.

dinnut · 04-26-2003, 04:19 PM

my 72 longbed has em in the bed. round holes. like 4 or 5 near the front. 2 or 3 closest to the front bed panel in the metal... a small and a big hole on either side also.

Mike Culpepper · 04-26-2003, 04:26 PM

Hutch,
thanks again. I went out and looked and someone had put what looked like tub and tile caulk in those holes sometime ago. I'm not sure WHY though.
Thanks to ya'll , my bed will drain once again!
Seriously,
Thanks,
Mike

Blue Beard · 04-26-2003, 10:54 PM

my 70 has drain holes.....

Solarus1981 · 04-27-2003, 12:41 AM

My 67 doesnt. Hope my new bed will though....

stllookn · 04-27-2003, 02:18 AM

My '67 fleetside has them...they are tough to find...more of a slot on the front outer edge of the box near the cab. Like Hutch has shown in his pic. I used a stainless steel dental tool to clean them out. I just drilled 1" holes in the stepside wood floor...it was about shot anyway! Solarus...check again with that dental pick and you will find them.

greasemonkey · 04-27-2003, 10:32 AM

PO punched 6 holes in the front of my bed with a hammer and chisel, then twisted the chisel sideways to enlarge them. No, they are not all the same size or evenly spaced, but I will admit the bed drains rather nicely.

casey · 04-27-2003, 02:30 PM

if you don't put in drain holes, nature will do it for you

GMC Jim · 04-27-2003, 05:42 PM

drilled 2 holes 1/2 diameter in front of bed about 8" from corners....works Ok...but no matter what size holes.. if there is only a couple of treeleaves floating around ; they will find their way to cover the drain holes!!!!!!!!!!!

Solarus1981 · 04-27-2003, 08:56 PM

I'm hopeing the new box I'm pickup up on Friday is gonna be a good one

Have to drill holes for water drains...

72_502chyanne · 04-27-2003, 09:01 PM

My 69 C10 has a nice set of drain holes. There about 4" long by about 2.5" tall. They are the result of rust. But hey, at least my bed dont hold water.

dinnut · 04-27-2003, 09:57 PM

why do you need a lwb for a 502? that sounds tight...

04-26-2003, 10:59 AM	#1
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	'72 hot tub We got hammered the other day with thunderstorms. After the rain stopped I was going to Autozone for something or the other and noticed that I had about 8 " of water in the front part of the bed of my truck. I noticed that these trucks(or at least mine) , don't have any drain holes in the front part of the bed like my '89 Silverado did. Have any of ya'll drilled a hole in the front corners of the bed to allow water to drain out? Mike __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

04-26-2003, 11:51 AM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	My 70' has drain holes that were in it. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-26-2003, 11:53 AM	#3
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	When I tore out the rotten wood from my short stepside and welded in a metal bed floor from a newer box, I made sure to leave the drain holes. Even when I got it rhino lined, I had them keep the drain holes open. It's one of the areas you always see rusted out on fleetsides. I think it's a good idea. Be sure to keep your door drain holes open too. good luck, Scott __________________ Silence is golden, duct tape is silver. - Scott

04-26-2003, 12:14 PM	#4
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,140	Mike, My 71 and 68 beds both have drain holes. They are actually not in the bed floor but are in the panel closest to the cab. They are in the corners of the bed at the bottom close to the sides. In fact they are not really round holes but are like a quarter inch size rounded on the top and flat towards the bottom the bottom. I have seen the replacement panels for the beds and the ones I have seen do come with these already there. Attached Images __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

04-26-2003, 12:32 PM	#5
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	mine is the same as hutches the only problem for me though is keeping them unclogged as my parking spot is under a tree __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

04-26-2003, 01:39 PM	#6
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	Hutch, I can't orient myself to your pic. I went out and took this pic of the inside bed looking at the front drivers side corner. Is this the area where your pic is taken? Mike __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

04-26-2003, 01:44 PM	#7
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	For some reason I con't get the pic to work! Mike __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

04-26-2003, 03:10 PM	#8
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,507	i have been looking at the thick plastic sheeting i have and then looking at the truck bed.... hum... redneck portable swimming pool.. just might do that soon __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

04-26-2003, 03:19 PM	#9
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I have holes drilled but I did them small so sometimes they get clogged up. But it is a good way to prevent rust.

04-26-2003, 03:42 PM	#10
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,140	Mike, The bed is off of the truck. The picture was taken looking from between the cab and bed on the outside towards the back on the passenger side. Here is one from the inside the bed looking forward towards the drivers side. The hole is sort of hard to see due to the colors. Have fun Attached Images __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

04-26-2003, 04:18 PM	#11
Green72GMC Registered User Join Date: Apr 2003 Location: Deville, Louisiana Posts: 293	I got drain holes but they arent exactly stock and they werent drilled. Its not a little drain hole either its about 1 inch across and in the middle of the bed. __________________ 1972 GMC SWB, 305 powered 1980 diesel VW pickup, Needs a Heart Transplant 1997 Toyota Taco The Second Amendment is in place incase they ignore the others.

04-26-2003, 04:19 PM	#12
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	my 72 longbed has em in the bed. round holes. like 4 or 5 near the front. 2 or 3 closest to the front bed panel in the metal... a small and a big hole on either side also. Attached Images __________________ 70 longbed 496/th400/Ford 9"

04-26-2003, 04:26 PM	#13
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	Hutch, thanks again. I went out and looked and someone had put what looked like tub and tile caulk in those holes sometime ago. I'm not sure WHY though. Thanks to ya'll , my bed will drain once again! Seriously, Thanks, Mike __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

04-26-2003, 10:54 PM	#14
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	my 70 has drain holes..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

04-27-2003, 12:41 AM	#15
Solarus1981 Registered User Join Date: Apr 2003 Location: Federal Way, wa Posts: 84	My 67 doesnt. Hope my new bed will though.... __________________ '67 LWB C-10, 406 cid th350, dunno what rear end Looking to rent a house in Puget Sound area, anyone have one?



Register or Log In To remove these advertisements.

04-27-2003, 02:18 AM	#16
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	My '67 fleetside has them...they are tough to find...more of a slot on the front outer edge of the box near the cab. Like Hutch has shown in his pic. I used a stainless steel dental tool to clean them out. I just drilled 1" holes in the stepside wood floor...it was about shot anyway! Solarus...check again with that dental pick and you will find them. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

04-27-2003, 10:32 AM	#17
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	PO punched 6 holes in the front of my bed with a hammer and chisel, then twisted the chisel sideways to enlarge them. No, they are not all the same size or evenly spaced, but I will admit the bed drains rather nicely. __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

04-27-2003, 02:30 PM	#18
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	if you don't put in drain holes, nature will do it for you

04-27-2003, 05:42 PM	#19
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	drilled 2 holes 1/2 diameter in front of bed about 8" from corners....works Ok...but no matter what size holes.. if there is only a couple of treeleaves floating around ; they will find their way to cover the drain holes!!!!!!!!!!! __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

04-27-2003, 08:56 PM	#20
Solarus1981 Registered User Join Date: Apr 2003 Location: Federal Way, wa Posts: 84	I'm hopeing the new box I'm pickup up on Friday is gonna be a good one Have to drill holes for water drains... __________________ '67 LWB C-10, 406 cid th350, dunno what rear end Looking to rent a house in Puget Sound area, anyone have one?

04-27-2003, 09:01 PM	#21
72_502chyanne Registered User Join Date: Mar 2003 Location: Central Illinois Posts: 10	My 69 C10 has a nice set of drain holes. There about 4" long by about 2.5" tall. They are the result of rust. But hey, at least my bed dont hold water. __________________ 1969 C-10 w/91,000 on original 307 and still purrs like a kitten. 1972 Chyanne w/ original 350, but soon will have a 502crate motor. Need a LWB for it though.

04-27-2003, 09:57 PM	#22
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	why do you need a lwb for a 502? that sounds tight... __________________ 70 longbed 496/th400/Ford 9"

Register or Log In To remove these advertisements.