WY 1968-72 GMC or 1968 Chevy MINT fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 01-21-2010, 08:49 PM

This is a pair of near perfect original paint fenders from a 1972 Jimmy. They don't get much better than this. They are correct for 68-72 GMC or 1968 Chevy trucks, you could use on 67 Chevy or GMC if you wanted to fill the markers. The are guaranteed to be 99% rust free Wyoming fenders with little to no body damage. If you don't like them send them back at my cost! They are pictured with all trim, but are being sold as bare fenders. Notice original grease pencil marks on the inside. If these don't sell I will keep them for a 68 project truck. Price is $250 each plus shipping (estimate is $50-75 depending on your location) This includes a wooden crate at no cost that I will build to protect these beauties. This is close as you will come to NOS without pulling the $600-800 trigger. Please reply in thread. Thanks, Sharpie
Passenger side SOLD to 1971 short4X4. Thanks Tom
Drivers side sold to Special-K. Thanks, Tim

*sharpie1972* · 01-21-2010, 08:50 PM

More pics

**1971 GMC SHORTY** · 01-21-2010, 09:32 PM

Wow, How Much To Ship To 91340

*sharpie1972* · 01-21-2010, 09:45 PM

Actual shipping charges only. I'm guessing we could get them to you for $125. Anything over that I will cover if you buy the pair. Any less and I will refund the difference. They just don't get any better than this. The only reason they are available is the fact that the owner of the Jimmy wanted to change to a Chevy front. These have less than 80k actual road time in dry, dusty, no salt Wyoming! Sharpie

*sharpie1972* · 01-21-2010, 09:47 PM

I need to make clear that the original paint is not as shiney as shown in the pictures. I just washed the dust off them, assuming that the buyer would repaint. Anyone wanting to bolt them on as original paint units needs to know the shine is long gone. Thanks, Sharpie

1971short4X4 · 01-21-2010, 11:14 PM

i will take the passenger side. (not maybe... 100% done deal)

Please pm me .. thanks or call me...
tom

**special-K** · 01-21-2010, 11:37 PM

Those are nice.N.O.S. for $600-$800? I haven`t seen that.I see more like 1/2 that much.I wish I could buy yours.

my67chevytruck · 01-21-2010, 11:46 PM

those are nice Dennis , wish i could swing that now,... ttt for some nice fenders.

*sharpie1972* · 01-22-2010, 12:57 AM

Passenger side sold 1971short4x4. Thanks, Tom
Special-K is right, $600-800 fenders might be on the top end, but premium NOS and original GM sheetmetal is only going to go up in price as the supply dries up and I don't see any of us giving up on quality restorations of these trucks. Sharpie

**too much stuff** · 01-22-2010, 01:44 AM

Boy those are nice. So what is happening with the jimmy emblems?

**special-K** · 01-22-2010, 08:13 AM

I agree.I prefer clean OEM used to N.O.S.,which becomes OEM used as soon as you bolt it on.

I talked me into it.I need a quote to 21771.If Greyhound is possible I`d be picking up in Frederick,MD.

*sharpie1972* · 01-22-2010, 08:51 AM

Too much stuff: The emblems are near mint and will be offered here. $75 for the pair shipped.
Special-K: Greyhound is $62 to Frederick, MD.
Thanks, Sharpie

*sharpie1972* · 01-25-2010, 05:54 PM

Passenger side sold to 1971short4x4.
Drivers side still available. $300 shipped. Thanks, Sharpie

*sharpie1972* · 01-25-2010, 07:19 PM

Drivers side sold to Special-K. Thanks, Sharpie

01-21-2010, 08:49 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	1968-72 GMC or 1968 Chevy MINT fenders This is a pair of near perfect original paint fenders from a 1972 Jimmy. They don't get much better than this. They are correct for 68-72 GMC or 1968 Chevy trucks, you could use on 67 Chevy or GMC if you wanted to fill the markers. The are guaranteed to be 99% rust free Wyoming fenders with little to no body damage. If you don't like them send them back at my cost! They are pictured with all trim, but are being sold as bare fenders. Notice original grease pencil marks on the inside. If these don't sell I will keep them for a 68 project truck. Price is $250 each plus shipping (estimate is $50-75 depending on your location) This includes a wooden crate at no cost that I will build to protect these beauties. This is close as you will come to NOS without pulling the $600-800 trigger. Please reply in thread. Thanks, Sharpie Passenger side SOLD to 1971 short4X4. Thanks Tom Drivers side sold to Special-K. Thanks, Tim Attached Images Last edited by sharpie1972; 01-25-2010 at 07:19 PM.

01-21-2010, 08:50 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968-72 GMC or 1968 Chevy MINT fenders More pics Attached Images

01-21-2010, 09:32 PM	#3
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: 1968-72 GMC or 1968 Chevy MINT fenders Wow, How Much To Ship To 91340

01-21-2010, 09:45 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968-72 GMC or 1968 Chevy MINT fenders Actual shipping charges only. I'm guessing we could get them to you for $125. Anything over that I will cover if you buy the pair. Any less and I will refund the difference. They just don't get any better than this. The only reason they are available is the fact that the owner of the Jimmy wanted to change to a Chevy front. These have less than 80k actual road time in dry, dusty, no salt Wyoming! Sharpie

01-21-2010, 09:47 PM	#5
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968-72 GMC or 1968 Chevy MINT fenders I need to make clear that the original paint is not as shiney as shown in the pictures. I just washed the dust off them, assuming that the buyer would repaint. Anyone wanting to bolt them on as original paint units needs to know the shine is long gone. Thanks, Sharpie

01-21-2010, 11:14 PM	#6
1971short4X4 Registered User Join Date: Nov 2001 Location: Mission Viejo, Ca Posts: 377	Re: 1968-72 GMC or 1968 Chevy MINT fenders i will take the passenger side. (not maybe... 100% done deal) Please pm me .. thanks or call me... tom Last edited by 1971short4X4; 01-21-2010 at 11:16 PM.

01-21-2010, 11:37 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 1968-72 GMC or 1968 Chevy MINT fenders Those are nice.N.O.S. for $600-$800? I haven`t seen that.I see more like 1/2 that much.I wish I could buy yours. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-21-2010, 11:46 PM	#8
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1968-72 GMC or 1968 Chevy MINT fenders those are nice Dennis , wish i could swing that now,... ttt for some nice fenders. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

01-22-2010, 12:57 AM	#9
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968-72 GMC or 1968 Chevy MINT fenders Passenger side sold 1971short4x4. Thanks, Tom Special-K is right, $600-800 fenders might be on the top end, but premium NOS and original GM sheetmetal is only going to go up in price as the supply dries up and I don't see any of us giving up on quality restorations of these trucks. Sharpie

01-22-2010, 01:44 AM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: 1968-72 GMC or 1968 Chevy MINT fenders Boy those are nice. So what is happening with the jimmy emblems? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-22-2010, 08:13 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 1968-72 GMC or 1968 Chevy MINT fenders I agree.I prefer clean OEM used to N.O.S.,which becomes OEM used as soon as you bolt it on. I talked me into it.I need a quote to 21771.If Greyhound is possible I`d be picking up in Frederick,MD. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-22-2010 at 08:16 AM.

01-22-2010, 08:51 AM	#12
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968-72 GMC or 1968 Chevy MINT fenders Too much stuff: The emblems are near mint and will be offered here. $75 for the pair shipped. Special-K: Greyhound is $62 to Frederick, MD. Thanks, Sharpie

01-25-2010, 05:54 PM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968-72 GMC or 1968 Chevy MINT fenders Passenger side sold to 1971short4x4. Drivers side still available. $300 shipped. Thanks, Sharpie

01-25-2010, 07:19 PM	#14
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968-72 GMC or 1968 Chevy MINT fenders Drivers side sold to Special-K. Thanks, Sharpie



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.