WTB A list of stuff I need to restore my 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CoolBeans · 01-15-2003, 12:13 AM

I trying to restore my 67 back to the original 250 L6/3spd setup and will need a BUNCH of stuff. I have tried to some degree to search this board, but my crappy internet connection was driving me insane

3spd tranny, linkages, clutch petal, fork. flywheel, bellhousing, and crossmember
3 spd column + wheel
Front driveshaft
Manual steering box

I know there will be more needed as I go, but this will keep the project moving along.

Thanks in advance

Steve

**breeh** · 01-15-2003, 12:25 AM

Since you said that you need a front driveshaft, I am assuming that this is a 4x4? I have the steering box that you need. It is not a common part but I am not tryng to retire on it. Let me know, I need the garage space. $30.00 plus shipping.

CoolBeans · 01-15-2003, 12:38 AM

It's a 2wd and the shaft is the one from the tranny to the carrier bearing. Should have given a bit more description in my original post. Is the steering box you have for a 4 wheeler or does it matter?

Thanks

sakohntr · 01-15-2003, 12:41 AM

I have a complete 2wd c10 gmc with a 6 cyl and 3 spd on the column you can rob just about everything you need out of it. 75.00 and you pull the parts. Am in no hurry.... 2.5 hrs north of mpls.

**breeh** · 01-15-2003, 12:50 AM

The steering box that I have is for 4x4. The 67 early 68 years are still a mystery to me in some cases so I cannot be sure if it is different than a 2wd. I know that they are different from late 69 to 72.

**BIG ORANGE** · 01-15-2003, 09:56 AM

sent you a PM!

MOTHERTRUCKERS · 01-15-2003, 02:36 PM

I have all the parts on your list here in Florida. e-mail if interested/

wild4wheels · 01-15-2003, 02:41 PM

Hmmm, I have what is left of a 72 Burb w/ 3 spd by Tipton, Ia ...
I see you are trying to restore, but it does have the disc brake/ 5 lug front and rears... sell ya the whole thing...

Wild

**nightmare** · 01-15-2003, 04:44 PM

you still lookin for parts steve? just let me know

mike
classic.chevy@banksterling.com

**Ironhorse** · 01-15-2003, 05:38 PM

Hey breeh, Sent you a PM concerning the 4x4 steering gear box.

jmanz69 · 01-15-2003, 06:09 PM

I have a manual steering box from my 69 if it will fit. Had a little slop in it. Probably needs a rebuild. I'll sell it for $15 plus shipping. Also have the whole 2-piece drive shaft from my 69. How long is the front part you need? I can measure mine to see if it will work. Sell you the whole thing for $30 plus mail. Or make reasonable offer on any of it.

jmanz69

**JDL** · 01-15-2003, 09:13 PM

I have most if not all if your are still looking.

**Tim Christian** · 01-15-2003, 09:44 PM

I also have everything you listed. Cheap!

CoolBeans · 01-15-2003, 10:04 PM

I am pretty new to this board and this is amazing how quick the response was on this. Thanks to all who responded. What I will probably do is start with the folks who are closer ( save cost on time and shipping) and will contact the rest of you if I have problems finding what I need. I am sure as this project continues there will be more parts needed.

Thanks again
Steve

DarkFox1 · 05-18-2003, 02:21 AM

alittle late to the game in replying, but I've got a 3 speed stick tranny with the bell housing under my 68 gmc, lemme know if you still need it

**old Rusty C10** · 05-18-2003, 05:30 PM

io have a 76 with a three ont he tree im going to strip parts off of in the near future if the tranny and linkages will work let me know youll have to pick up in NJ tho

ZOOMY · 05-18-2003, 08:11 PM

I have everything you need cheap and I'm not too far away in S. Wisconsin......Zoomy

01-15-2003, 12:13 AM	#1
CoolBeans Registered User Join Date: Jun 2002 Location: Scranton, IA Posts: 7	WTB A list of stuff I need to restore my 67 I trying to restore my 67 back to the original 250 L6/3spd setup and will need a BUNCH of stuff. I have tried to some degree to search this board, but my crappy internet connection was driving me insane 3spd tranny, linkages, clutch petal, fork. flywheel, bellhousing, and crossmember 3 spd column + wheel Front driveshaft Manual steering box I know there will be more needed as I go, but this will keep the project moving along. Thanks in advance Steve

01-15-2003, 12:25 AM	#2
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Since you said that you need a front driveshaft, I am assuming that this is a 4x4? I have the steering box that you need. It is not a common part but I am not tryng to retire on it. Let me know, I need the garage space. $30.00 plus shipping. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-15-2003, 12:41 AM	#4
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	truck I have a complete 2wd c10 gmc with a 6 cyl and 3 spd on the column you can rob just about everything you need out of it. 75.00 and you pull the parts. Am in no hurry.... 2.5 hrs north of mpls. __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

01-15-2003, 12:50 AM	#5
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	The steering box that I have is for 4x4. The 67 early 68 years are still a mystery to me in some cases so I cannot be sure if it is different than a 2wd. I know that they are different from late 69 to 72. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-15-2003, 09:56 AM	#6
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	sent you a PM! __________________ Things happen for a reason!

01-15-2003, 12:38 AM	#3
CoolBeans Registered User Join Date: Jun 2002 Location: Scranton, IA Posts: 7	It's a 2wd and the shaft is the one from the tranny to the carrier bearing. Should have given a bit more description in my original post. Is the steering box you have for a 4 wheeler or does it matter? Thanks

01-15-2003, 02:36 PM	#7
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I have all the parts on your list here in Florida. e-mail if interested/ __________________ Rest in Peace Ed. Thanks for all the good times.

01-15-2003, 02:41 PM	#8
wild4wheels Registered User Join Date: Jan 2001 Location: Queen Creek, Arizona Posts: 1,626	Hmmm, I have what is left of a 72 Burb w/ 3 spd by Tipton, Ia ... I see you are trying to restore, but it does have the disc brake/ 5 lug front and rears... sell ya the whole thing... Wild __________________ Dave aka "Wild" Current truck "Ida Mae" 71 K5 Blazer Former Trucks "Loretta" 71 Longbed (AZ) "Tanya" 69 Stepside (AZ) "Ferdinand" 71 Longhorn (SD) "Patches" 67 Panel (IA/ KY) "Rosita" 68 C30 (KY) Instagram @Wildforwheels @k5_klub @c10university Profile pic provided by Jeff Sundance

01-15-2003, 05:38 PM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,123	Hey breeh, Sent you a PM concerning the 4x4 steering gear box. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-15-2003, 06:09 PM	#11
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I have a manual steering box from my 69 if it will fit. Had a little slop in it. Probably needs a rebuild. I'll sell it for $15 plus shipping. Also have the whole 2-piece drive shaft from my 69. How long is the front part you need? I can measure mine to see if it will work. Sell you the whole thing for $30 plus mail. Or make reasonable offer on any of it. jmanz69

01-15-2003, 09:13 PM	#12
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,839	I have most if not all if your are still looking. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

01-15-2003, 09:44 PM	#13
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I also have everything you listed. Cheap!

01-15-2003, 10:04 PM	#14
CoolBeans Registered User Join Date: Jun 2002 Location: Scranton, IA Posts: 7	I am pretty new to this board and this is amazing how quick the response was on this. Thanks to all who responded. What I will probably do is start with the folks who are closer ( save cost on time and shipping) and will contact the rest of you if I have problems finding what I need. I am sure as this project continues there will be more parts needed. Thanks again Steve

05-18-2003, 02:21 AM	#15
DarkFox1 in WAY over my head Join Date: Sep 2001 Location: Douglasville GA Posts: 923	alittle late to the game in replying, but I've got a 3 speed stick tranny with the bell housing under my 68 gmc, lemme know if you still need it

05-18-2003, 05:30 PM	#16
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,276	io have a 76 with a three ont he tree im going to strip parts off of in the near future if the tranny and linkages will work let me know youll have to pick up in NJ tho __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

05-18-2003, 08:11 PM	#17
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	parts I have everything you need cheap and I'm not too far away in S. Wisconsin......Zoomy

Register or Log In To remove these advertisements.