|
10-24-2010, 01:00 PM
|
#1 |
|
Registered User
Join Date: Nov 2008
Location: lebanon Pa
Posts: 72
|
van ralleys
curious if anybody has used the 6.5. my problem is i have 3" belltech spindles and 3" drop springs and now my control arm sits on my inner lip of the wheel. dont really want to cut on the arm if i dont have to. Thanks
|
|
|
|
10-24-2010, 01:31 PM
|
#2 |
|
Registered User
Join Date: Jan 2010
Location: haysville,kansas
Posts: 524
|
Re: van ralleys
i have them on my truck with 2.5 spindles and one coil cut i had to shave the control arm a bit
|
|
|
|
|
10-24-2010, 01:37 PM
|
#3 |
|
Registered User
Join Date: Nov 2008
Location: lebanon Pa
Posts: 72
|
Re: van ralleys
do u happen to have any pics and was it the whole bend off the bottom. i bought 1" spacers but it moved the wheel out way to far now it kinda looks weird. o yeah thats with the stock ralleys
Last edited by mfl1; 10-24-2010 at 01:38 PM. Reason: more info |
|
|
|
|
10-24-2010, 01:48 PM
|
#4 |
|
Getting Old; Going Broke
Join Date: Apr 2010
Location: Owasso OK
Posts: 2,764
|
Re: van ralleys
I used some 15x6.5's on my trailer, does that help?
 I think Joe put some on the front of his crew to help with clearance issues. Not totally sure of his drop, but you can probably find out in his build thread. http://67-72chevytrucks.com/vboard/s...d.php?t=383701
__________________
Why is every used 350 sbc out of a corvette? There's only two things that excite a man, expensive toys and real expensive toys. VEGETARIAN: That's an old Indian word meaning "I don't hunt so good." When the going gets tough, switch to power tools. |
|
|
|
|
10-24-2010, 01:56 PM
|
#5 |
|
Registered User
Join Date: Jan 2010
Location: haysville,kansas
Posts: 524
|
Re: van ralleys
not my pic but i found it on here this is what i trimmed off mine
|
|
|
|
|
10-24-2010, 02:13 PM
|
#6 |
|
Registered User
Join Date: Nov 2008
Location: lebanon Pa
Posts: 72
|
Re: van ralleys
thanks 4 the pic
|
|
|
|
|
10-24-2010, 03:29 PM
|
#7 | |
|
Registered User
Join Date: Jul 2008
Location: sayreville nj
Posts: 1,072
|
Re: van ralleys
Quote:
this something i can do on the truck? thanks |
|
|
|
|
|
10-24-2010, 10:22 PM
|
#8 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,934
|
Re: van ralleys
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
10-24-2010, 10:40 PM
|
#9 |
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: van ralleys
I have 3" spindles and 6.5" van rallies.
my arms are trimmed like the pic above
__________________
 CHEVY ONLY
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
