TX WTB - Clutch pedal, tilt, front axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Critter · 11-18-2010, 12:37 PM

I am converting my auto Blazer to a 5 speed so I need a few things...

A van tilt that I can convert or a decent deal on a factory truck tilt for a MANUAL FLOOR SHIFTER. I don't want to hack up an original auto truck tilt.

A clutch pedal assembly -I would like to have everything that goes on the inside of the firewall but I will be using a hydraulic master cylinder so I don't need any linkage or under hood parts.

A front Dana 44 8 lug axle (probably needs to be within driving distance) OR the parts to convert my original 6 lug over to 8 (could be shipped I guess).

I have a 2wd th400 tranny that I could trade if somebody was interested

teeitup · 11-18-2010, 12:48 PM

I have a clutch cassembly $15 plus shipping. I can get pic after work. Thanks Randy

Critter · 11-18-2010, 09:55 PM

Thanks Randy, sounds good. I will wait for pics.

teeitup · 11-18-2010, 09:57 PM

Dang, I forgot to get a pic of it tonight, I will for sure Fri, sorry. Thanks Randy

teeitup · 11-19-2010, 06:11 PM

here is the one I have

68chevyfuelie · 11-19-2010, 07:11 PM

Quote:

Originally Posted by Critter

A front Dana 44 8 lug axle (probably needs to be within driving distance) OR the parts to convert my original 6 lug over to 8 (could be shipped I guess).

I've got a few hubs and spindles, to do the conversion. It's probably easier than swapping a whole axle. Do you know what size your spindles are now?

Critter · 11-19-2010, 11:48 PM

Quote:

Originally Posted by teeitup

here is the one I have

Thats looks fine Randy, PM me paypal info please and I will get you payed up sometime this weekend.

Critter · 11-19-2010, 11:52 PM

Quote:

Originally Posted by 68chevyfuelie

I've got a few hubs and spindles, to do the conversion. It's probably easier than swapping a whole axle. Do you know what size your spindles are now?

I don't know but I will try to check, I'm assuming you mean the outside diameter of the spindle, correct? I was thinking I need to change the spindles, hubs, outer shafts, and the outer "C"s. Are you saying I could possibly keep my current 6 lug outer "C"s and spindles if they are a particular size?

Critter · 11-21-2010, 12:14 AM

ttt

68chevyfuelie · 11-21-2010, 09:51 AM

Quote:

Originally Posted by Critter

I don't know but I will try to check, I'm assuming you mean the outside diameter of the spindle, correct? I was thinking I need to change the spindles, hubs, outer shafts, and the outer "C"s. Are you saying I could possibly keep my current 6 lug outer "C"s and spindles if they are a particular size?

All that needs to be changed are caliper backing plates, hubs, and possibly spindles. The inner wheel bearing had 2 different sizes. Chances are on a K10/K5, you're going to have the small bearing spindles, but who knows whats in there after 40 years. Are you running internal locking hubs, or external locking hubs?

teeitup · 11-21-2010, 10:42 AM

Critter, I'll get a quote today. Thanks Randy

Critter · 11-21-2010, 05:29 PM

Randy, PM and Payment sent. Thanks!

**t korinek** · 11-21-2010, 06:51 PM

I have a motor home tilt in good shape, same as the truck tilt only doesn't have the neutral safety switch in the right place.

Its an auto & would come without the shift handle or indicator housing.
$160 shipped
Tom

Critter · 11-21-2010, 11:01 PM

Quote:

Originally Posted by t korinek

I have a motor home tilt in good shape, same as the truck tilt only doesn't have the neutral safety switch in the right place.

Its an auto & would come without the shift handle or indicator housing.
$160 shipped
Tom

I appreciate it but I'm going to pass for now, I can get van tilts considerably cheaper than that around here in the salvage yards...or at least I have in the past.

Maybe that is my best bet at this point. Unless someone comes up with a original truck floor shift column.

Critter · 11-21-2010, 11:52 PM

Quote:

Originally Posted by 68chevyfuelie

All that needs to be changed are caliper backing plates, hubs, and possibly spindles. The inner wheel bearing had 2 different sizes. Chances are on a K10/K5, you're going to have the small bearing spindles, but who knows whats in there after 40 years. Are you running internal locking hubs, or external locking hubs?

Sorry, I could have sworn I replied to this earlier...but I guess not. I have external locking hubs at the moment but they are junk and will probably get replaced at the same time I do this swap. From what I know, internals are stronger, correct? Could you put together a "kit" for me including the larger spindles, internal locking hub setup and everything else I would need?

68chevyfuelie · 11-22-2010, 11:14 PM

Pm sent.

Critter · 11-24-2010, 01:33 PM

PM sent back...

11-18-2010, 12:37 PM	#1
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	WTB - Clutch pedal, tilt, front axle I am converting my auto Blazer to a 5 speed so I need a few things... A van tilt that I can convert or a decent deal on a factory truck tilt for a MANUAL FLOOR SHIFTER. I don't want to hack up an original auto truck tilt. A clutch pedal assembly -I would like to have everything that goes on the inside of the firewall but I will be using a hydraulic master cylinder so I don't need any linkage or under hood parts. A front Dana 44 8 lug axle (probably needs to be within driving distance) OR the parts to convert my original 6 lug over to 8 (could be shipped I guess). I have a 2wd th400 tranny that I could trade if somebody was interested __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

11-18-2010, 12:48 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - Clutch pedal, tilt, front axle I have a clutch cassembly $15 plus shipping. I can get pic after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-18-2010, 09:55 PM	#3
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: WTB - Clutch pedal, tilt, front axle Thanks Randy, sounds good. I will wait for pics. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

11-18-2010, 09:57 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - Clutch pedal, tilt, front axle Dang, I forgot to get a pic of it tonight, I will for sure Fri, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-19-2010, 06:11 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - Clutch pedal, tilt, front axle here is the one I have Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-21-2010, 12:14 AM	#9
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: WTB - Clutch pedal, tilt, front axle ttt __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

11-21-2010, 10:42 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB - Clutch pedal, tilt, front axle Critter, I'll get a quote today. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-21-2010, 05:29 PM	#12
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: WTB - Clutch pedal, tilt, front axle Randy, PM and Payment sent. Thanks! __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

11-21-2010, 06:51 PM	#13
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,192	Re: WTB - Clutch pedal, tilt, front axle I have a motor home tilt in good shape, same as the truck tilt only doesn't have the neutral safety switch in the right place. Its an auto & would come without the shift handle or indicator housing. $160 shipped Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

11-22-2010, 11:14 PM	#16
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: WTB - Clutch pedal, tilt, front axle Pm sent.

11-24-2010, 01:33 PM	#17
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: WTB - Clutch pedal, tilt, front axle PM sent back... __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.