R1 Rhino - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BuiltByBrooks · 04-16-2010, 07:48 PM

Here is a build i did at work for our company's race rhino

BuiltByBrooks · 04-16-2010, 07:51 PM

BuiltByBrooks · 04-16-2010, 07:52 PM

Sillyoldman · 04-16-2010, 10:01 PM

Very nice. Awsome welds.

67ChevyRedneck · 04-16-2010, 10:32 PM

Quote:

Originally Posted by Sillyoldman

Very nice. Awsome welds.

Welds??? All I see is long rows of nickels! Very nice!

nuke1 · 04-18-2010, 12:08 AM

that is so fricken sweet!!!!!!!!!!!!, more pics

cable666guy · 04-22-2010, 07:57 AM

Nice!!!

nomrlz · 04-22-2010, 11:46 AM

Quote:

Originally Posted by BuiltByBrooks

my god, look at those welds

BuiltByBrooks · 04-22-2010, 08:22 PM

Thanks guys for the comments!! Makes it all worth the time i put into it

BuiltByBrooks · 04-22-2010, 10:46 PM

Britain Smith · 04-23-2010, 01:38 AM

Where do you race those at?

-Britain

SCOTTMO · 04-23-2010, 07:22 PM

Very Nice.........Nathan better watch out

BuiltByBrooks · 04-23-2010, 09:40 PM

Quote:

Originally Posted by Britain Smith

Where do you race those at?

-Britain

Lucas Oil Off Road Racing circuit SR1 Class...They hold them at tracks around the country

BuiltByBrooks · 04-23-2010, 09:41 PM

Quote:

Originally Posted by SCOTTMO

Very Nice.........Nathan better watch out

**FRENCHBLUE72** · 05-04-2010, 11:46 AM

That is bad azz I love it how fast they getting them up to?

nuke1 · 05-04-2010, 02:52 PM

I got a question, wher could I find out for the blueprints to make one, gives me an idea, I have a spare engine laying around, so.......

67ChevyRedneck · 05-04-2010, 08:38 PM

Awesome. I just watched the XTreme 4x4 where they hopped one up. I think I want one now

BuiltByBrooks · 05-05-2010, 12:05 AM

Quote:

Originally Posted by FRENCHBLUE72

That is bad azz I love it how fast they getting them up to?

2nd gear hittin like 80mph

BuiltByBrooks · 05-05-2010, 12:06 AM

Quote:

Originally Posted by nuke1

I got a question, wher could I find out for the blueprints to make one, gives me an idea, I have a spare engine laying around, so.......

In my head...LoL for witch part

nuke1 · 05-05-2010, 12:31 AM

Honestly, I have a few questions, what did you do for the rear knuckles and axles, front knuckles/spindles and brakes, upper and lower ball joints, u use heims? what did you use. I can figure out the chassis and motor, those are a few things that I have a question on. sorry for the stupidity, it is jsut up here you do not see these kind of things made, and I would like to try.

BuiltByBrooks · 05-06-2010, 11:59 PM

Quote:

Originally Posted by nuke1

Honestly, I have a few questions, what did you do for the rear knuckles and axles, front knuckles/spindles and brakes, upper and lower ball joints, u use heims? what did you use. I can figure out the chassis and motor, those are a few things that I have a question on. sorry for the stupidity, it is jsut up here you do not see these kind of things made, and I would like to try.

go to weller racing for the rear set up in the sr1 section.. front trinity racing spindles their is a big brake kit out for them now.. ball joint used uniballs

sams60gmc · 12-11-2010, 12:38 AM

I just had to pick my jaw up off the ground after seeing those welds.

oldblue1968chevy · 12-14-2010, 11:57 PM

Nice welds!

Very cool buggy, what're the specs on the motor? Or is it even a a stock based motor?

BuiltByBrooks · 12-15-2010, 01:04 AM

2008 r1 motor stock

thirdstreettito · 12-18-2010, 12:01 PM

Holy sh** on a single! Those are the most beautiful welds. Did you go to the bank to get that many stacks of dimes?

04-16-2010, 07:48 PM	#1
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	R1 Rhino Here is a build i did at work for our company's race rhino

04-16-2010, 07:51 PM	#2
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: R1 Rhino

04-16-2010, 07:52 PM	#3
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: R1 Rhino

04-16-2010, 10:01 PM	#4
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Re: R1 Rhino Very nice. Awsome welds. __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

04-18-2010, 12:08 AM	#6
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: R1 Rhino that is so fricken sweet!!!!!!!!!!!!, more pics __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

04-22-2010, 07:57 AM	#7
cable666guy Registered User Join Date: Sep 2008 Location: Willow Grove, PA Posts: 299	Re: R1 Rhino Nice!!!

04-22-2010, 08:22 PM	#9
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: R1 Rhino Thanks guys for the comments!! Makes it all worth the time i put into it

04-22-2010, 10:46 PM	#10
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: R1 Rhino

04-23-2010, 01:38 AM	#11
Britain Smith Registered User Join Date: May 2007 Location: Hillsboro, OR Posts: 35	Re: R1 Rhino Where do you race those at? -Britain

04-23-2010, 07:22 PM	#12
SCOTTMO powdercoater Join Date: Dec 2008 Location: mesa,az Posts: 203	Re: R1 Rhino Very Nice.........Nathan better watch out __________________ SCOTT

05-04-2010, 11:46 AM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: R1 Rhino That is bad azz I love it how fast they getting them up to? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-04-2010, 02:52 PM	#16
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: R1 Rhino I got a question, wher could I find out for the blueprints to make one, gives me an idea, I have a spare engine laying around, so....... __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

05-04-2010, 08:38 PM	#17
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: R1 Rhino Awesome. I just watched the XTreme 4x4 where they hopped one up. I think I want one now __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-05-2010, 12:31 AM	#20
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: R1 Rhino Honestly, I have a few questions, what did you do for the rear knuckles and axles, front knuckles/spindles and brakes, upper and lower ball joints, u use heims? what did you use. I can figure out the chassis and motor, those are a few things that I have a question on. sorry for the stupidity, it is jsut up here you do not see these kind of things made, and I would like to try. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

12-11-2010, 12:38 AM	#22
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: R1 Rhino I just had to pick my jaw up off the ground after seeing those welds. __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718



Register or Log In To remove these advertisements.

12-14-2010, 11:57 PM	#23
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: R1 Rhino Nice welds! Very cool buggy, what're the specs on the motor? Or is it even a a stock based motor? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

12-15-2010, 01:04 AM	#24
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: R1 Rhino 2008 r1 motor stock

12-18-2010, 12:01 PM	#25
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: R1 Rhino Holy sh** on a single! Those are the most beautiful welds. Did you go to the bank to get that many stacks of dimes? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

Register or Log In To remove these advertisements.