WTB, Blazer or Aux. Pickup Filler Neck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 07-20-2003, 11:08 AM

WTB, a 69-72 Blazer filler neck or 67-72 pickup Auxillary filler neck. Looking for good condition or better with no pitting or rust through. Will need to know what year it came off of to be able to get proper cap. Oh yeah, must have the steel vent pipe still attached. Thanks. philwec@fast.net

**jerry moss** · 07-20-2003, 11:49 AM

i have a couple off of 72s. $25.00 delivered

*72longbed* · 07-20-2003, 09:10 PM

Jerry, are they from a blazer or a pickup auxillary?? The fill tube length is different on each. I just need to know the overall length. Thanks.

**jerry moss** · 07-20-2003, 09:13 PM

don't have the length in front of me but both are off pickups with factory aux. tanks.

*72longbed* · 07-20-2003, 09:34 PM

Jerry, I'm real interested in the best one of the bunch. Can you please get me an overall measurement when you get a chance. Even if its tomorrow or the next day, I do appreciate it. I need the overall length from the cap to the other end, and from the cap to the bend where it goes through the floor of the truck. Thank you very much.

**jerry moss** · 07-20-2003, 09:52 PM

overall length is a little over 10 inches with the bend at about 5 inches from the cap. there are no other bends , the inlet on the tank sticks straight up through the bed floor on both the filler and the vent and is connected with a rubber hose. it has a metal cover that hides everything. i have three trucks with factory aux tanks and have owned several others with them and they are all identical to each other.

*72longbed* · 07-21-2003, 11:04 AM

Jerry, thanks for the specs on the filler. Do you have any of those metal covers that are in rust free condition? If so, I'd like to have you ship me the filler neck and cover. My e-mail address so I can give you my address and work out the details. Thank you.

philwec@fast.net

07-20-2003, 11:08 AM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	WTB, Blazer or Aux. Pickup Filler Neck WTB, a 69-72 Blazer filler neck or 67-72 pickup Auxillary filler neck. Looking for good condition or better with no pitting or rust through. Will need to know what year it came off of to be able to get proper cap. Oh yeah, must have the steel vent pipe still attached. Thanks. philwec@fast.net Last edited by 72longbed; 07-20-2003 at 11:17 AM.

07-20-2003, 11:49 AM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,781	i have a couple off of 72s. $25.00 delivered __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-20-2003, 09:13 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,781	don't have the length in front of me but both are off pickups with factory aux. tanks. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-20-2003, 09:52 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,781	overall length is a little over 10 inches with the bend at about 5 inches from the cap. there are no other bends , the inlet on the tank sticks straight up through the bed floor on both the filler and the vent and is connected with a rubber hose. it has a metal cover that hides everything. i have three trucks with factory aux tanks and have owned several others with them and they are all identical to each other. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-20-2003, 09:10 PM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Jerry, are they from a blazer or a pickup auxillary?? The fill tube length is different on each. I just need to know the overall length. Thanks.

07-20-2003, 09:34 PM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Jerry, I'm real interested in the best one of the bunch. Can you please get me an overall measurement when you get a chance. Even if its tomorrow or the next day, I do appreciate it. I need the overall length from the cap to the other end, and from the cap to the bend where it goes through the floor of the truck. Thank you very much.

07-21-2003, 11:04 AM	#7
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Jerry, thanks for the specs on the filler. Do you have any of those metal covers that are in rust free condition? If so, I'd like to have you ship me the filler neck and cover. My e-mail address so I can give you my address and work out the details. Thank you. philwec@fast.net



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.